232 Gongneung-ro, Nowon-gu, Seoul, 01811, korea
Tel :+82-2-970-6793
Fax : +82-2-970-6800
Copyright © Seoul National University of Science&Technology. All rights Reserved.
Department of Materials Science & Engineering
Name |
Young-In Lee |
MAJOR |
Functional nanomaterials |
TEL |
02-970-6646 |
E-mail |
youngin@seoultech.ac.kr |
Biography
2009-2012 Ph. D. in Fine Chemical Engineering, Hanyang University, Republic of Korea
2005-2007 M.S. in Fine Chemical Engineering, Hanyang University, Republic of Korea
1998-2005 B.S. in Material Science and Engineering, Seoul National University of Technology, Republic of Korea
2005-2007 M.S. in Fine Chemical Engineering, Hanyang University, Republic of Korea
1998-2005 B.S. in Material Science and Engineering, Seoul National University of Technology, Republic of Korea
Careers
2014-Present Associate Professor, Department of Materials Science and Engineering, Seoul National University of Science and Technology
2021-Present Director, The Institute of Powder Technology, Seoul National University of Science and Technology
2021-Present National Research Foundation of Korea, Review Board
2018-Present General director, The Korean Powder Metallurgy and Materials Institute
2019-2021 Department Chair, Department of Materials Science and Engineering, Seoul National University of Science and Technology
2019-2021 Member, Professor council & University council, Seoul National University of Science and Technology
2017-2021 Director, Seoultech development fund, Seoul National University of Science and Technology
2013-2014 Research Assistant Professor, BK21 Plus Education and Research Team, Hanyang University
2012-2013 Postdoctoral Researcher, Department of Chemical and Environmental Engineering, University of California-Riverside
2007-2009 Associate Researcher, Printed Circuit Board Division, Mobile Communication Company, LG Electronics
2021-Present Director, The Institute of Powder Technology, Seoul National University of Science and Technology
2021-Present National Research Foundation of Korea, Review Board
2018-Present General director, The Korean Powder Metallurgy and Materials Institute
2019-2021 Department Chair, Department of Materials Science and Engineering, Seoul National University of Science and Technology
2019-2021 Member, Professor council & University council, Seoul National University of Science and Technology
2017-2021 Director, Seoultech development fund, Seoul National University of Science and Technology
2013-2014 Research Assistant Professor, BK21 Plus Education and Research Team, Hanyang University
2012-2013 Postdoctoral Researcher, Department of Chemical and Environmental Engineering, University of California-Riverside
2007-2009 Associate Researcher, Printed Circuit Board Division, Mobile Communication Company, LG Electronics
Research Areas
ㅇFunctional NanoMaterials Research lab.
1. Functional nanomaterials
2. Photocatalysts & Piezocatalysts
3. Filtration: water showing system, gas filter
4. Permanent magnet
5. Materials for 5G technology
6. Photothermal conversion materials
7. Oxide dispersion strengthened alloys
8. Hydrogen sensing materials
1. Functional nanomaterials
2. Photocatalysts & Piezocatalysts
3. Filtration: water showing system, gas filter
4. Permanent magnet
5. Materials for 5G technology
6. Photothermal conversion materials
7. Oxide dispersion strengthened alloys
8. Hydrogen sensing materials
Teaching
ㅇUndergraduate education
1. Microstructure of Materials
2. Introduction to Materials Synthesis
3. Composite materials
ㅇGraduate education
1. Nanocomposites
2. Synthesis of Nanomaterials
3. Application of Nanomaterials
1. Microstructure of Materials
2. Introduction to Materials Synthesis
3. Composite materials
ㅇGraduate education
1. Nanocomposites
2. Synthesis of Nanomaterials
3. Application of Nanomaterials
Selected Publications
"Synthesis of self-modified black BaTiO3-x nanoparticles and effect of oxygen vacancy for the expansion of piezocatalytic application"; Myeongjun Ji, Jeong Hyun Kim, Cheol-Hui Ryu, and Young-In Lee*, Nano Energy, 2022, 95, 106993.
"Fabrication of W-Y2O3 composites by ultrasonic spray pyrolysis and spark plasma sintering"; Jeong Hyun Kim, Myeongjun Ji, Jongmin Byun, Young-Keun Jeong, Sung-Tag Oh* and Young-In Lee*, Int. J. Refract. Met. H., 2021, 99, 105606.
"One-step synthesis of black TiO2-x microspheres by ultrasonic spray pyrolysis process and their visible-light-driven photocatalytic activities"; Myungjun Ji, Yong-Ho Choa and Young-In Lee*, Ultrason. Sonochem., 2021, 74, 105557.
"Hydrogenerated Black Titanium Dioxide with Oxygen Defects Embedded PC70BM for Boosting Electron Flow in Perovskite Devices"; Jihyun Lim, Woongsik Jang, Myeongjun Ji, Young-In Lee*, and Dong Hwan Wang*, J. Alloys. Compd., 2020, 846, 156329.
"Facile Synthesis of Hierarchical CuS Microspheres with High Visible-light-driven Photocatalytic Activity"; Jae-Hyun Yoo, Myeongjun Ji, Jeong Hyun Kim, Cheol-Hui Ryu and Young-In Lee*, J. Photochem. Photobiol. A, 2020, 401, 112782.
"Adhesive Resin Composites with Ceramic Nanoparticles for Enhanced Light Extraction Efficiency of Sandwiched LED Device Structure"; Jin Gyeong Park, Myeongjun Ji, Yun Taek Ko, Cheol-Hui Ryu, Jeong Hyun Kim, Yong-Ho Choa* and Young-In Lee*, Mater. Today Commun., 2020, 25, 101378.
"Visible Light Driven Photocatalytic Degradation Enhanced by a/b Phase Heterojunctions on Electrospun Bi2O3 Nanofibers"; Gyu-Dam Lim, Jae-Hyun Yoo, Myungjun Ji and Young-In Lee*, J. Alloys. Compd., 2019, 806, 1060-1067.
"Facile synthesis of zirconia nanoparticles using a salt-assisted ultrasonic spray pyrolysis combined with a citrate precursor method"; Young Hwangbo and Young-In Lee*, J. Alloys. Compd., 2019, 771, 821-826.
"Fabrication of W-Y2O3 composites by ultrasonic spray pyrolysis and spark plasma sintering"; Jeong Hyun Kim, Myeongjun Ji, Jongmin Byun, Young-Keun Jeong, Sung-Tag Oh* and Young-In Lee*, Int. J. Refract. Met. H., 2021, 99, 105606.
"One-step synthesis of black TiO2-x microspheres by ultrasonic spray pyrolysis process and their visible-light-driven photocatalytic activities"; Myungjun Ji, Yong-Ho Choa and Young-In Lee*, Ultrason. Sonochem., 2021, 74, 105557.
"Hydrogenerated Black Titanium Dioxide with Oxygen Defects Embedded PC70BM for Boosting Electron Flow in Perovskite Devices"; Jihyun Lim, Woongsik Jang, Myeongjun Ji, Young-In Lee*, and Dong Hwan Wang*, J. Alloys. Compd., 2020, 846, 156329.
"Facile Synthesis of Hierarchical CuS Microspheres with High Visible-light-driven Photocatalytic Activity"; Jae-Hyun Yoo, Myeongjun Ji, Jeong Hyun Kim, Cheol-Hui Ryu and Young-In Lee*, J. Photochem. Photobiol. A, 2020, 401, 112782.
"Adhesive Resin Composites with Ceramic Nanoparticles for Enhanced Light Extraction Efficiency of Sandwiched LED Device Structure"; Jin Gyeong Park, Myeongjun Ji, Yun Taek Ko, Cheol-Hui Ryu, Jeong Hyun Kim, Yong-Ho Choa* and Young-In Lee*, Mater. Today Commun., 2020, 25, 101378.
"Visible Light Driven Photocatalytic Degradation Enhanced by a/b Phase Heterojunctions on Electrospun Bi2O3 Nanofibers"; Gyu-Dam Lim, Jae-Hyun Yoo, Myungjun Ji and Young-In Lee*, J. Alloys. Compd., 2019, 806, 1060-1067.
"Facile synthesis of zirconia nanoparticles using a salt-assisted ultrasonic spray pyrolysis combined with a citrate precursor method"; Young Hwangbo and Young-In Lee*, J. Alloys. Compd., 2019, 771, 821-826.
Journal Papers
https://sites.google.com/view/seoultech-fnmr/achievement/publications
=====================================================================================================================================
=====================================================================================================================================
◾ Enhancing the hydrophilicity of non-woven fabric using atmospheric pressure plasma treatment optimized by the design of experiments, Materials transactions, vol.64 No.9 pp.2206~2213, 2023이영인
◾ Processing parameter correlations in powder bed fusion additive manufacturing for Fe-Si soft magnetic materials through design of experiments, POWDER METALLURGY, vol.66 No.5 pp.602~612, 2023이영인
◾ Morphology transformation of stainless steel 316L powder from spheres to flakes using high-energy ball milling and the investigation of transformation behaviour, POWDER METALLURGY, vol.66 No.5 pp.679~687, 2023이영인
◾ Influence of the initial powder characteristic on the densified tungsten microstructure by spark plasma sintering and hot isostatic pressing, POWDER METALLURGY, vol.66 No.5 pp.644~649, 2023이영인
◾ Large-scale synthesis of CuS nanoparticles for photothermal materials using high-concentration Cu complex ion precursor, JOURNAL OF THE AMERICAN CERAMIC SOCIETY, vol.106 No.12 pp.7278~7287, 2023이영인
◾ Synthesis and reaction path of Ti-Al-C MAX phases by reaction with Ti-Al intermetallic compounds and TiC, JOURNAL OF THE AMERICAN CERAMIC SOCIETY, vol.106 No.12 pp.7230~7239, 2023이영인
◾ Properties of Y2O3 Dispersion Strengthened W Fabricated by Ultrasonic Spray Pyrolysis and Pressure Sintering, KOREAN JOURNAL OF METALS AND MATERIALS, vol.61 No.3 pp.170~174, 2023이영인
◾ Engineered kirigami design of PVDF-Pt core-shell nanofiber network for flexible transparent electrode, SCIENTIFIC REPORTS, vol.13 No.1 pp.2582~2582, 2023이영인
◾ Atomic layer deposition of ZnO layers on Bi2Te3 powders: Comparison of gas fluidization and rotary reactors, CERAMICS INTERNATIONAL, vol.48 No.21 pp.36773~36780, 2022이영인
◾ Facile self-assembly-based fabrication of a polyvinylidene fluoride nanofiber membrane with immobilized titanium dioxide nanoparticles for dye wastewater treatment, Journal of Cleaner Production, vol.378, 2022이영인
◾ SYNTHESIS AND CHARACTERIZATION OF W COMPOSITE POWDER WITH La2O3-Y2O3 NANO-DISPERSOIDS BY ULTRASONIC SPRAY PYROLYSIS, ARCHIVES OF METALLURGY AND MATERIALS, vol.67 No.4 pp.1507~1510, 2022이영인
◾ SIMPLE SYNTHESIS OF BLACK TiO2 NANOFIBERS VIA CALCINATION IN INERT ATMOSPHERE, ARCHIVES OF METALLURGY AND MATERIALS, vol.67 No.4 pp.1481~1486, 2022이영인
◾ Microstructural characterization and densification of W-1 wt% La2O3 composite powders synthesized by ultrasonic spray pyrolysis, JOURNAL OF MATERIALS SCIENCE, vol.57 No.38 pp.17946~17956, 2022이영인
◾ Synthesis of self-modified black BaTiO3_x nanoparticles and effect of oxygen vacancy for the expansion of piezocatalytic application, NANO ENERGY, vol.95, 2022이영인
◾ MORPHOLOGY CONTROL OF ONE-DIMENSIONAL GALLIUM NITRIDE NANOSTRUCTURES BY MODULATING THE CRYSTALLINITY OF SACRIFICIAL GALLIUM OXIDE TEMPLATES, Archives of Metallurgy and Materials, vol.66 No.3 pp.709~712, 2021이영인
◾ Effect of calcination temperature on photocatalytic degradation performance of electrospun Ga2O3 nanofibers, Journal of Nanoscience and Nanotechnology, vol.21 No.9 pp.4016~4021, 2021이영인
◾ Effect of Y2O3 dispersion method on the microstructure characteristic of Ni-base superalloy, Journal of Nanoscience and Nanotechnology, vol.21 No.9 pp.4955~4958, 2021이영인
◾ SYNTHESIS OF Y2O3-DISPERSED W POWDERS PREPARED BY ULTRASONIC SPRAY PYROLYSIS AND POLYMER SOLUTION ROUTE, Archives of Metallurgy and Materials, vol.66 No.3 pp.799~802, 2021이영인
◾ Homogeneous Dispersion of Yttrium Oxide Particles in Nickel-Based Superalloy by High Pressure Homogenizing and Ball Milling Method, Archives of Metallurgy and Materials, vol.66 No.4 pp.1055~1058, 2021이영인
◾ Fabrication of W-Y2O3 composites by ultrasonic spray pyrolysis and spark plasma sintering, International Journal of Refractory Metals and Hard Materials, vol.99, 2021이영인
◾ Synthesis and optimization of Ag-ZnO heterojunction composite nanofibers for enhanced photocatalytic activity, Journal of Ceramic Processing Research, vol.22 No.4 pp.386~393, 2021이영인
◾ One-step synthesis of black TiO2-x microspheres by ultrasonic spray pyrolysis process and their visible-light-driven photocatalytic activities, Ultrasonics Sonochemistry, vol.74 pp.105557~, 2021이영인
◾ A Study on Morphology Control of (Ga1-xZnx)(N1-xOx) Nanofibers according to the Composition and Crystallinity of Oxide Nanofibers Synthesized by Electrospinning, Journal of Korean Powder Metallurgy Institute, vol.28 No.3 pp.259~266, 2021이영인
◾ 초음파 분무 열분해와 화학적 변환 공정을 이용한 (GaN)1-x(ZnO)x 나노입자의 합성과 광학적 성질, 한국분말야금학회지, vol.28 No.2 pp.143~149, 2021이영인
◾ Microstructure and Sintering Behavior of Fine Tungsten Powders Synthesized by Ultrasonic Spray Pyrolysis, Korean Journal of Metals and Materials, vol.59 No.5 pp.289~294, 2021이영인
◾ Fabrication of W-Y2O3-La2O3 composite by chemical process and spark plasma sintering, Powder Metallurgy, vol.64 No.2 pp.108~114, 2021이영인
◾ Hydrogen reduction behavior of W/Y2O3 powder synthesized by ultrasonic spray pyrolysis, International Journal of Refractory Metals and Hard Materials, vol.95 pp.105450~105450, 2021이영인
◾ Adhesive resin composites with ceramic nanoparticles for enhanced light extraction efficiency of sandwiched LED device structure, Materials Today Communications, vol.25, 2020이영인
◾ Hydrogenerated black titanium dioxide-embedded conducting polymer for boosting electron flow in perovskite devices, JOURNAL OF ALLOYS AND COMPOUNDS, vol.846, 2020이영인
◾ Facile synthesis of hierarchical CuS microspheres with high visible-light-driven photocatalytic activity, JOURNAL OF PHOTOCHEMISTRY AND PHOTOBIOLOGY A-CHEMISTRY, vol.401, 2020이영인
◾ DILATOMETRIC ANALYSIS OF TIIE SINTERING BEHAVIOR OF Bi2Te3 THERMOELECTRIC POWDERS, ARCHIVES OF METALLURGY AND MATERIALS, vol.65 No.3 pp.1117~1120, 2020이영인
◾ EFFECT OF PYROLYSIS CONDITIONS ON THE PHYSICOCHEMICAL PROPERTIES OF GRAPHITIC CARBON NITRIDE FOR VISIBLE-LIGHT-DRIVEN PHOTOCATALYTIC DEGRADATION, ARCHIVES OF METALLURGY AND MATERIALS, vol.65 No.3 pp.1111~1116, 2020이영인
◾ 전기방사를 이용하여 합성한 BiVO4 나노섬유의 미세구조와 광촉매 특성에 하소 온도가 미치는 영향, 한국분말야금학회지, vol.27 No.3 pp.226~232, 2020이영인
◾ Visible light driven photocatalytic degradation enhanced by alpha/beta phase heterojunctions on electrospun Bi2O3 nanofibers, JOURNAL OF ALLOYS AND COMPOUNDS, vol.806 pp.1060~1067, 2019이영인
◾ Effect of Pyrolysis temperature on TiO2 Nanoparticles Synthesized by a Salt-assisted Ultrasonic Spray Pyrolysis Process, Journal of Korean Powder Metallurgy Institute, vol.26 No.3 pp.237~242, 2019이영인
◾ Synthesis and Optical Property of TiO2 Nanoparticles Using a Salt-assisted Ultrasonic Spray Pyrolysis Process, Journal of Korean Powder Metallurgy Institute, vol.26 No.1 pp.34~39, 2019이영인
◾ Diameter-controllable synthesis and enhanced photocatalytic activity of electrospun ZnO nanofibers, Korean Journal of Materials Research, vol.29 No.2 pp.79~86, 2019이영인
◾ Facile synthesis of zirconia nanoparticles using a salt-assisted ultrasonic spray pyrolysis combined with a citrate precursor method, JOURNAL OF ALLOYS AND COMPOUNDS, vol.771 pp.821~826, 2019이영인
◾ Synthesis and thermoelectric characterization of bulk-type tellurium nanowire/polymer nanocomposites, JOURNAL OF MATERIALS SCIENCE, vol.52 No.21 pp.12724~12733, 2017이영인
◾ Electrospun CoFe2O4 Nanofibers as High Capacity Anode Materials for Li-Ion Batteries, JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, vol.17 No.10 pp.7632~7635, 2017이영인
◾ Thermochemical hydrogen sensor based on Pt-coated nanofiber catalyst deposited on pyramidally textured thermoelectric film, APPLIED SURFACE SCIENCE, vol.415 No.SPECIAL SI pp.119~125, 2017이영인
◾ Synthesis and Optical Property of BaTiO3 Nanoparticles Using a Salt-assisted Ultrasonic Spray Pyrolysis Process, 한국분말야금학회지, vol.24 No.4 pp.326~331, 2017이영인
◾ SYNTHESIS OF SINGLE CRYSTALLINE TITANIUM OXIDE AND SODIUM TITANATE NANORODS VIA SALT-ASSISTED ULTRASONIC SPRAY PYROLYSIS, ARCHIVES OF METALLURGY AND MATERIALS, vol.62 No.2 pp.1411~1414, 2017이영인
◾ Synthesis and Optical Properties of TiO2/TiOF2 Composite Powder with Controlled Phase Fractions via an Ultrasonic Spray Pyrolysis Process, 한국재료학회지, vol.27 No.6 pp.325~330, 2017이영인
◾ Fabrication of Fe-base superalloy powders with yttrium oxide dispersion by mechanical alloying and chemical route, MATERIALS LETTERS, vol.197 pp.135~138, 2017이영인
◾ Synthesis and photoluminescence properties of ZrO2 : Eu3+nanoparticles using salt-assisted ultrasonic pyrolysis process, Korean Journal of Materials Research, vol.27 No.5 pp.270~275, 2017이영인
◾ Full densification of inkjet-printed copper conductive tracks on a flexible substrate utilizing a hydrogen plasma sintering, APPLIED SURFACE SCIENCE, vol.396 pp.1239~1244, 2017이영인
◾ Fabrication and characterization of thermochemical hydrogen sensor with laminated structure, INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, vol.42 No.1 pp.749~756, 2017이영인
◾ Hydrazine vapor-based rapid and low temperature post-processing for inkjet printed conductive copper patterns, Thin Solid Films, vol.616 pp.260~264, 2016이영인
◾ Investigation on Microstructure and Electrical Properties of Silver Conductive Features Using a Powder Composed of Silver nanoparticles and Nanoplatelets, 한국분말야금학회지, vol.23 No.5 pp.358~363, 2016이영인
◾ Microstructure-controlled synthesis of nickel oxide nanowires by thermal oxidation of nickel nanowires, Journal of Nanoscience and Nanotechnology, vol.16 No.10 pp.10806~10809, 2016이영인
◾ Selective Transformation of Cu Nanowires to Cu2S or CuS Nanostructures and the Roles of the Kirkendall Effect and Anion Exchange Reaction, Materials Chemistry and Physics, vol.180 pp.104~113, 2016이영인
◾ Synthesis and Optical Property of a TiOF2 Powder via an Ultrasonic Spray Pyrolysis Process, 한국분말야금학회지, vol.23 No.4 pp.307~310, 2016이영인
◾ Synthesis of GD-doped CeO2 by ultrasonic spray pyrolysis with salt-assisted decomposition and its electrical and mechanical properties, Journal of Ceramic Processing Research, vol.17 No.8 pp.818~824, 2016이영인
◾ Synthesis, Morphology Control and Electromagnetic Wave Absorption Properties of Electrospun FeCo Alloy Nanofibers, Journal of Nanoscience and Nanotechnology, vol.16 No.5 pp.5190~5194, 2016이영인
◾ Synthesis and Electromagnetic Wave Absorbing Property of BaTiO3@Fe Nanofibers with Core-Shell Structure, 한국분말야금학회지, vol.23 No.1 pp.38~42, 2016이영인
◾ Low Cost Fabrication of Blue Luminescent Silicon Quantum Dots Using Photo-Induced Chemical Etching, NANOSCIENCE AND NANOTECHNOLOGY LETTERS, vol.8 No.1 pp.86~89, 2016이영인
◾ 은 나노섬유의 직경제어 합성 및 투명전극 응용 연구, 한국재료학회지, vol.25 No.10 pp.537~542, 2015이영인
◾ Synthesis of CuO Nanotubes with Controlled Diameters by Chemical Transformation of Cu Nanowires, JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, vol.15 No.10 pp.8166~8170, 2015이영인
◾ A Novel Method for Fine Patterning by Piezoelectrically Induced Pressure Adjustment of Inkjet Printing, JOURNAL OF ELECTRONIC MATERIALS, vol.44 No.8 pp.2608~2614, 2015이영인
◾ Synthesis and Characterization of Nickel Nanowires by an Anodic Aluminum Oxide Template-Based Electrodeposition, 한국분말야금학회지, vol.22 No.3 pp.216~220, 2015이영인
◾ Thermochemical hydrogen sensor based on chalcogenide nanowire arrays, NANOTECHNOLOGY, vol.26 No.14 pp.145503~145503, 2015이영인
◾ Wettability Investigation of UV/O-3 and Acid Functionalized MWCNT and MWCNT/PMMA Nanocomposites by Contact Angle Measurement, JOURNAL OF NANOMATERIALS, vol.2015 pp.130270~130270, 2015이영인
◾ Electrospun tin oxide nanofibers with a controlled diameter and morphology, Korean Journal of Materials Research, vol.24 No.12 pp.663~670, 2014이영인
◾ Metallic alloy nanoparticle-based fabrication and optical properties of a Cu(In1-xGax)S-2 absorber layer for solar cells, Journal of Alloys and Compounds, vol.615 pp.496~500, 2014이영인
◾ Effect of Calcination Temperature on the Photocatalytic Properties of Electrospun TiO2 Nanofibers, Journal of Nanoscience and Nanotechnology, vol.14 No.10 pp.8005~8009, 2014이영인
◾ Three-dimensional hierarchical Te-Si nanostructures, Nanoscale, vol.6 No.20 pp.11697~11702, 2014이영인
◾ Synthesis of metal oxide-coated conductive metal powders and their application to front electrodes for solar cells, Korean Journal of Materials Research, vol.24 No.9 pp.502~507, 2014이영인
◾ Fabrication and sensing property for conducting polymer nanowire-based biosensor for detection of immunoglobulin G, Research on Chemical Intermediates, vol.40 No.7 pp.2565~2570, 2014이영인
◾ Synthesis and Characterization of a Ceria Based Composite Electrolyte for Solid Oxide Fuel Cells by an Ultrasonic Spray Pyrolysis Process, 한국분말야금학회지, vol.21 No.3 pp.222~228, 2014이영인
◾ Electrodeposition of Bi2Te3 Nanowire Arrays with Uniform Length and Controlled Composition in Anodic Aluminum Templates, Journal of The Electrochemical Society, vol.161 No.9 pp.442~446, 2014이영인
Conference Papers
https://sites.google.com/view/seoultech-fnmr/achievement/conference
=====================================================================================================================================
=====================================================================================================================================
◾ 지명준, 김정현, 전희연, 한승헌, 이동훈, 이영인, Synthesis of black BaTiO3-x microspheres and study on water-flow triggered prezocatalytic performance, 2023 한국분말재료학회 추계학술대회, 경주 화백컨벤션센터, 2023이영인
◾ 전찬일, 김정현, 지명준, 김현성, 이영인, One-step facile synthesis of (Mg0.2Co0.2Ni0.2Cu0.2Zn0.2)O high entropy ceramic powder via ultrasonic spray pyrolysis and its sintering behavior, 2023 한국분말재료학회 추계학술대회, 경주 화백컨벤션센터, 2023이영인
◾ 김정현, 지명준, 전희연, 심현준, 김태훈, 이영인, Improved reduction-diffusion reaction participated by submicron Fe particles for fabricating grain-refined Nd-Fe-B sintered magnets, 2023 한국분말재료학회 추계학술대회, 경주 화백컨벤션센터, 2023이영인
◾ 지명준, 김정현, 전희연, 한승헌, 이동훈, 이영인, High-performance solar steam generation of black TiO2-x with high-concentration bulk oxygen vacancies, 2023 한국분말재료학회 추계학술대회, 경주 화백컨벤션센터, 2023이영인
◾ 전희연, 지명준, 김정현, 한승헌, 이동훈, 이영인, Fabrication of photo-thermochromic composite films with reversible color-changing via facile and gram-scale synthesis of copper sulfide nanoparticles, 2023 한국분말재료학회 추계학술대회, 경주 화백컨벤션센터, 2023이영인
◾ 한승헌, 지명준, 김정현, 이동훈, 윤경식, 이영인, Enhancing photothermal conversion efficiency in black TiO2-x particles via oxygen vacancy enrichment through ultrasonic spray pyrolysis, 2023 한국분말재료학회 추계학술대회, 경주 화백컨벤션센터, 2023이영인
◾ Myeongjun Ji, Jeong Hyun Kim, Hee Yeon Jeon, Seungheon Han, Dong Hoon Lee, and Young-In Lee, Study on process parameter correlation of NdFeB permanent magnet laser powder bed fusion process through the design of experiment, 6th International Conference and Exhibition on Powder Metallurgy in Asia, HICO, Gyeongju, 2023이영인
◾ Dong Hoon Lee, Myeongjun Ji, Jeong Hyun Kim, Hee Yeon Jeon, Seungheon Han, Young-In Lee, Stainless steel filters with desirable pore volume, size, and structure fabricated by composite powder containing fine needle-like particles, 6th International Conference and Exhibition on Powder Metallurgy in Asia, HICO, Gyeongju, 2023이영인
◾ Jeong Hyun Kim, Myeongjun Ji, Hee Yeon Jeon, Seungheon Han, Dong Hoon Lee,, and Young-In Lee, Spray pyrolysis-based synthesis of pure molybdenum powder with nanoscale primary particles and its sintering characteristics, 6th International Conference and Exhibition on Powder Metallurgy in Asia, HICO, Gyeongju, 2023이영인
◾ 김정현, 김현성, 심현준, 윤경식, 김태훈, 이영인, Optimized Reduction-Diffusion Process Using Submicron Fe Powder for Fabrication of Grain-Refined Nd-Fe-B Sintered Magnets, 2023년 한국자기학회 동계학술대회, 해운대 한화리조트, 2023이영인
◾ 심현준, 지명준, 김정현, 최준필, 이영인, Investigation of Process Variables and Optimal Conditions in AM Process for FeSi through Design of Experiments, 2023년 한국자기학회 동계학술대회, 해운대 한화리조트, 2023이영인
◾ 윤경식, 지명준, 김정현, 심현준, 이영인, SmFe11Ti Sintered Magnets Fabricated by Reduction-Diffusion Process and Spark Plasma Sintering, 2023년 한국자기학회 동계학술대회, 해운대 한화리조트, 2023이영인
◾ 한승헌, 지명준, 김정현, 전희연, 이동훈, 이영인, Copper foil surface modification to simultaneously satisfy ultra-low roughness and high adhesion strength for 6G high-speed signal transmission, Materials Research Society of Korea, Fall Conference 2023, 경주 라한호텔, 2023이영인
◾ 전희연, 지명준, 김정현, 한승헌, 이동훈, 이영인, Facile and gram-scale synthesis of copper sulfide nanoparticles for photo-thermochromic films with reversible color-changing, The Korean Institute of Metal and Materials, Fall conference 2023, 대구컨벤션센터, 2023이영인
◾ 김정현, 지명준, 전희연, 한승헌, 이동훈, 김태훈, 이영인, Optimized Reduction-Diffusion Process Using Submicron Fe Powder for Fabrication of Grain-refined Nd-Fe-B Sintered Magnets, The Korean Institute of Metal and Materials, Fall conference 2023, 대구컨벤션센터, 2023이영인
◾ 지명준, 김정현, 한승헌, 이동훈, 전희연, 이영인, High-performance interfacial solar steam generation of black TiO2-x with high-concentration bulk oxygen vacancies, 2023 Fall Meeting of The Korean Ceramic Society, Coex, 2023이영인
◾ 한승헌, 지명준, 김정현, 전희연, 이동훈, 이영인, Synthesis of black TiO2-x particles having a high concentration of oxygen vacancies with excellent photothermal conversion efficiency through ultrasonic spray pyrolysis, 2023 Fall Meeting of The Korean Ceramic Society, Coex, 2023이영인
◾ Young-In Lee, Myeongjun Ji, Facile self-assembly-based fabrication of a polyvinylidene fluoride nanofiber membrane with immobilized titanium dioxide nanoparticles for dye wastewater treatment, 13th International Congress on Membranes and Membrane Processes, Makuhari Messe, 2023이영인
◾ Hee Yeon Jeon, Myeongjun Ji, Jeong Hyun Kim, Young-In Lee, Facile And Gram-scale Synthesis Of Copper Sulfide Nanoparticles For Photothermal Material Based On High Concentration Metal Complex Ion Precursor, Global Conference on Innovation Materials 2023, ICC Jeju, 2023이영인
◾ Jeong Hyun Kim, Myeongjun Ji, Hee Yeon Jeon, Young-In Lee, Experimental Investigation Of Y₂O₃ Nanoparticles Effect On The Microstructure And Mechanical Properties Of ODS Tungsten Alloy, Global Conference on Innovation Materials 2023, ICC Jeju, 2023이영인
◾ Jeong Hyun Kim, Myeongjun Ji, Tae-Hoon Kim and Young-In Lee, Fabrication of Nd-Fe-B pressless sintered magnets by the favorable reduction-diffusion reaction of chemically prepared submicron Fe, 2023 KMS Summer Conference, 제주 신화월드, 2023이영인
◾ 허연지, 이의선, 김지영, 이영인, 오승탁, 볼 밀링으로 제조한 WO3-NiO-CuO의 수소 환원과 상압소결, The Korean Institute of Metal and Materials, Sping conference 2023, 제주국제컨벤션센터, 2023이영인
◾ Hyun-Jun Shim, Myeongjun Ji, Joon Phil Choi, Chanil Jeon and Young-In Lee, Processing Parameter Correlations in Powder Bed Fusion Additive Manufacturing for FeSi Soft Magnetic Materials through Design of Experiments, The Korean Institute of Metal and Materials, Sping conference 2023, 제주국제컨벤션센터, 2023이영인
◾ Mijeong Park, Hee Yeon Jeon, Seungheon Han, and Young-In Lee, Influencing Factor and Reduction Method with Silane Coupling on the Aging Effect, The Korean Institute of Metal and Materials, Sping conference 2023, 제주국제컨벤션센터, 2023이영인
◾ Yong-Seong Lee, Jeong Hyun Kim, Dong Hoon Lee, Kyung-Shik Yoon, Jongmin Byun, and Young-In Lee, Optimization of Sintering Conditions for Fine Molybdenum Powder Synthesized by Ultrasonic Spray Pyrolysis Followed, The Korean Institute of Metal and Materials, Sping conference 2023, 제주국제컨벤션센터, 2023이영인
◾ 지명준, 김정현, 박미정, 전희연, 한승헌, 이동훈, 이영인, High-performance interfacial solar steam generation using black TiO2-x nanoparticles: A novel synthesis strategy for the uniform introduction of high-concentrtion oxygen vacancies, 2023 Sping Meeting of The Korean Ceramic Society, 라마다프라자 제주호텔, 2023이영인
◾ MiJeong Park, Hee Yeon Jeon, Jeong Hyun Kim, Dong Hoon Lee, and Young-In Lee, Optimization of Atmospheric Plasma Treatment Parameters for Hydrophilic surface functionalization of non-woven fabrics through Design of Experiment, 2023 MRS SPRING MEETING & EXHIBIT, San Francisco, California, USA, 2023이영인
◾ Hee Yeon Jeon, MiJeong Park, Myeongjun Ji, Cheol-Hui Ryu, Seungheon Han and Young-In Lee, Facile and gram-scale synthesis of Cu2-xS nanoplate for photothermal application by sonochemical-assisted reaction based on high-concentration copper ion complex precursor, 2023 MRS SPRING MEETING & EXHIBIT, San Francisco, California, USA, 2023이영인
◾ 허연지, 이의선, 김지영, 이영인, 오승탁, 볼 밀링한 WO3-NiO-CuO 혼합분말을 이용한 W-Ni-Cu 계 분말 합성 및 소결, 2023 Spring conference of Korean Powder Metallurgy and Materials Institute, 창원컨벤션센터, 2023이영인
◾ 김정현, 이용성, 심현준, 이영인, Synthesis of Nd2Fe14B powder by a reduction-diffusion reaction involving an optimized type of oxide precursor, 2023 Spring conference of Korean Powder Metallurgy and Materials Institute, 창원컨벤션센터, 2023이영인
◾ 한승헌, 지명준, 박미정, 윤경식, 이영인, Synthesis of black TiO2-x particles having a high concentration of oxygen vacancies with excellent photothermal conversion efficiency through ultrasonic spray pyrolysis, 2023 Spring conference of Korean Powder Metallurgy and Materials Institute, 창원컨벤션센터, 2023이영인
◾ 이동훈, 전희연, 전찬일, 이영인, Synthesis of 3D morphology black ZnO-x microspheres with excellent piezocatalysis properties using USP, 2023 Spring conference of Korean Powder Metallurgy and Materials Institute, 창원컨벤션센터, 2023이영인
◾ 류철희, 지명준, 김정현, 이영인, Mass Production of Cu2-xSe Nanoparticle for Thermoelectric Bulk Materials with Nanosized Grains via High Concentration Metal Complex Precursor, 2022 MRS FALL MEETING & EXHIBIT, Boston, Masachusetts, USA, 2022이영인
◾ 지명준, 김정현, 류철희, 이영인, Synthesis of Self-Modified Black BaTiO3-x Nanoparticles and Effect of Oxygen Vacancy for the Expansion of Piezocatalytic Application, 2022 MRS FALL MEETING & EXHIBIT, Boston, Masachusetts, USA, 2022이영인
◾ 김정현, 지명준, 류철희, 이영인, A Study on the Relationship Between the Size and Magnetic Properties of Nd2Fe14B Through the Fabrication of Fine-Grained Magnets Using Submicron Fe, 2022 MRS FALL MEETING & EXHIBIT, Boston, Masachusetts, USA, 2022이영인
◾ 김정현, 지명준, 류철희, 김태훈, 이영인, Comparative Analysis of Nd2Fe14B Synthesized through Different Reduction-Diffusion Reaction Routes Depending on Iron Precursor Particle Size, Digests of the 2022 KMS Winterr Conference The Korean Magnetics Society, 한화리조트 해운대, 2022이영인
◾ 전희연, 류철희, 박미정, 박진경, 이영인, Facile and gram-scale synthesis of Cu2-xS nanoparticles for photothermal application by sonochemical-assisted reaction based on high-concentration copper ion complex precursor, The 17th International Symposium on Novel and Nano Materials, 휘닉스 제주 섭지코지, 2022이영인
◾ 한승헌, 지명준, 김정현, 류철희, 전희연, 정영근, 이영인, Facile synthesis of oxygen-deficient black TiO2-x microspheres with excellent photothermal conversion efficiency through ultrasonic spray pyrolysis, The 17th International Symposium on Novel and Nano Materials, 휘닉스 제주 섭지코지, 2022이영인
◾ 허연지, 이의선, 김지영, 이영인, 오승탁, Hydrogen reduction behavior and microstructure characterizatics of WO3-NiO-CuO powder mixture, The 17th International Symposium on Novel and Nano Materials, 휘닉스 제주 섭지코지, 2022이영인
◾ 류철희, 지명준, 김정현, 이영인, Mass production of Cu2-xSe nanoparticle for thermoelectric bulk materials with nanosized grains via high concentration metal complex precursor, The 17th International Symposium on Novel and Nano Materials, 휘닉스 제주 섭지코지, 2022이영인
◾ 이동훈, 지명준, 박만호, 윤정열, 이영인, Morphology transformation of STS316L powder from spheres to flakes using high-energy ball milling and process control agent, The 17th International Symposium on Novel and Nano Materials, 휘닉스 제주 섭지코지, 2022이영인
◾ 박미정, 지명준, 전희연, 이영인, Optimization of atmospheric plasma treatment parameters for hydrophilic surface functionalization of non-woven fabrics through design of experiment, The 17th International Symposium on Novel and Nano Materials, 휘닉스 제주 섭지코지, 2022이영인
◾ 이용성, 김정현, 변종민, 정영근, 이영인, Synthesis and sintering behavior of fine molybdenum powder by ultrasonic spray pyrolysis and subsequent hydrogen reduction, The 17th International Symposium on Novel and Nano Materials, 휘닉스 제주 섭지코지, 2022이영인
◾ 김하진, 한승헌, 이동훈, 이영인, Synthesis of Na2Ti6O13 nanorods by ultrasonic spray pyrolysis combined with molten salt synthesis and their sorption capacity, The 17th International Symposium on Novel and Nano Materials, 휘닉스 제주 섭지코지, 2022이영인
◾ 심현준, 지명준, 최준필, 이영인, Systematization of critical parameters in the additive manufacturing of FeSi soft magnetic materials through design of experiments, The 17th International Symposium on Novel and Nano Materials, 휘닉스 제주 섭지코지, 2022이영인
◾ 황병철, 최병준, 이영인, 변종민, Basic research laboratory for refractory alloys with ultra-high heat resistance based on microstructure control convergence technology, The 17th International Symposium on Novel and Nano Materials, 휘닉스 제주 섭지코지, 2022이영인
◾ 변종민, 김정현, 최원준, 이영인, Hydrogen reduction behavior of WO3_Y2O3 powder synthesized by ultrasonic spray pyrolysis for fabrication of oxide dispersion strengthed refractroy alloys, The 17th International Symposium on Novel and Nano Materials, 휘닉스 제주 섭지코지, 2022이영인
◾ 지명준, 김정현, 류철희, 이영인, Synthesis of black BaTiO3-x microspheres by ultrasonic spray pyrolysis and their piezocatalytic performance for antibiotics and endocrine-disrupting substance, Materials Research Society of Korea, Fall Conference 2022, 휘닉스 제주 섭지코지, 2022이영인
◾ 허연지, 이의선, 김지영, 이영인, 오승탁, 볼 밀링을 이용한 WO3-NiO-CuO 혼합분말 제조 및 수소환원 공정, Materials Research Society of Korea, Fall Conference 2022, 휘닉스 제주 섭지코지, 2022이영인
◾ 지명준, 이동훈, 이영인, Synthesis of self-modified black BaTiO3-x nanoparticles and effect of oxygen vacancy for the expansion of piezocatalytic application, Materials Challenges in Alternative & Renewable Energy, 부산 웨스틴 조선, 2022이영인
◾ 지명준, 전희연, 류철희, 김정현, 박미정, 이영인, Synthesis of self-modified black BaTiO3-x nanoparticles and effect of oxygen vacancy for the expansion of piezocatalytic application, The 20th International Nanotech Symposium & Exhibition, 일산 킨텍스, 2022이영인
◾ 류철희, 지명준, 김정현, 박미정, 전희연, 이영인, Mass production of Cu2-xSe nanopowder for thermoelectric bulk materials with nanosized grains via high concentration metal complex precursor, The Korean Institute of Metal and Materials, Sping conference 2022, 창원컨벤션센터, 2022이영인
◾ 전희연, 지명준, 김정현, 류철희, 박미정, 이영인, High-performance Flexible/stretchable Conductors Based on Platinum Nanotube Network for Mechanical Energy Harvesting, The Korean Institute of Metal and Materials, Sping conference 2022, 창원컨벤션센터, 2022이영인
◾ 김정현, 지명준, 류철희, 박미정, 전희연, 이영인, Grain Refinement of Nd2Fe14B Sintered Magnet Using Sub-micron Iron Powder and Its Effects on Magnetic Properties, The Korean Institute of Metal and Materials, Sping conference 2022, 창원컨벤션센터, 2022이영인
◾ 김하진, 한승헌, 류철희, 이영인, Synthesis of sodium titanate nanorods by ultrasonic spray pyrolysis combined with molten salt synthesis and their dye adsorption capacity, 2022 Sping Meeting of The Korean Ceramic Society, 여수 엑스포 컨벤션 센터, 2022이영인
◾ 박미정, 지명준, 김정현, 류철희, 전희연, 김하진, 이영인, Production of amphiphilic oil-water separation membrane using self-assembly of hydrophobic electrospun fibers and hydrophilic nanomaterials, 2022 Sping Meeting of The Korean Ceramic Society, 여수 엑스포 컨벤션 센터, 2022이영인
◾ 이의선, 허연지, 김지영, 이영인, 정영근, 오승탁, Fabrication of oxide dispersed tungsten through SPS and HIP, 2022 Spring conference of Korean Powder Metallurgy and Materials Institute, 경주 화백컨벤션센터, 2022이영인
◾ 허연지, 이의선, 김지영, 이영인, 정영근, 오승탁, Synthesis of W composites with nano-sized oxide dispersion by USP and their spark plasma sintering, 2022 Spring conference of Korean Powder Metallurgy and Materials Institute, 경주 화백컨벤션센터, 2022이영인
◾ 류철희, 박미정, 이동훈, 이영인, Large scale synthesis of micron-sized copper powder with unique chemical reduction method and its sintering behavior, 2022 Spring conference of Korean Powder Metallurgy and Materials Institute, 경주 화백컨벤션센터, 2022이영인
◾ 이동훈, 한승헌, 지영준, 허연지, 이영인, Morphology transformation of STS316L powder from spheres to flakes using high energy ball milling and process control agent, 2022 Spring conference of Korean Powder Metallurgy and Materials Institute, 경주 화백컨벤션센터, 2022이영인
◾ 지명준, 김정현, 전희연, 김하진, 한승헌, 이영인, Synthesis of black BaTiO3-x microspheres by ultrasonic spray pyrolysis and their water-flow triggered piezocatalytic performance, 2022 Spring conference of Korean Powder Metallurgy and Materials Institute, 경주 화백컨벤션센터, 2022이영인
◾ 허연지, 이의선, 김정현, 이영인, 정영근, 오승탁, 초음파 분무 열분해 및 수소환원 공정으로 제조한 La2O3 나노입자 분산 W 분말의 특성, Materials Research Society of Korea, Fall conference 2021, 경주 라한호텔, 2021이영인
◾ 이의선, 허연지, 김정현, 이영인, 정영근, 오승탁, Fabrication of La2O3-Y2O3 Nanoparticle Dispersed W Composites by Ultrasonic Spray Pyrolysis and Spark Plasma Sintering, Materials Research Society of Korea, Fall conference 2021, 경주 라한호텔, 2021이영인
◾ 류철희, 지명준, 김정현, 박미정, 전희연, 이영인, Large-scale sonochemical synthesis of thermoelectric Cu2-xSe nanopowders via high-concentration metal precursors, Materials Research Society of Korea, Fall conference 2021, 경주 라한호텔, 2021이영인
◾ 김정현, 지명준, 류철희, 이영인, Experimental investigation on effect of Y2O3 nanoparticles on microstructure and mechanical properties of W-Y2O3 ODS alloy, Materials Research Society of Korea, Fall conference 2021, 경주 라한호텔, 2021이영인
◾ 지명준, 김정현, 류철희, 박미정, 전희연, 이영인, Enhanced piezocatalytic activity of BaTiO3 nanoparticles by engineering surface oxygen vacancies, Materials Research Society of Korea, Fall conference 2021, 경주 라한호텔, 2021이영인
◾ Cheol-Hui Ryu, Myeongjun Ji, Jeong Hyun Kim, Seungheon Han, and Young-In Lee, Size-controlled synthesis of Cu powders via high concentration Cu ion complex precursors, 2021 3rd International Symposium on Innovation in Materials Processing, Sono Calm Jeju, 2021이영인
◾ Hee Yeon Jeon, Myeongjun Ji, Jeong Hyun Kim, Cheol-Hui Ryu, and Young-In Lee, Synthesis of Platinum Nanotube for Flexible and Stretchable Electrodes using Electrospinning Method, 2021 3rd International Symposium on Innovation in Materials Processing, Sono Calm Jeju, 2021이영인
◾ Hajin Kim, Myeongjun Ji, Jeong Hyun Kim, Cheol-Hui Ryu, and Young-In Lee, Synthesis of Na2Ti6O13 nanorods by Ultrasonic Spray Pyrolysis with Molten Salt Synthesis and their sorption capacity, 2021 3rd International Symposium on Innovation in Materials Processing, Sono Calm Jeju, 2021이영인
◾ Youn Ji Heo, Eui Seon Lee, Jeong Hyun Kim, Young-In Lee, Young-Keun Jeong, and Sung-Tag Oh, Synthesis and characterization of W composite powder with La2O3-Y2O3 nano-dispersoids by ultrasonic spray pyrolysis, 2021 3rd International Symposium on Innovation in Materials Processing, Sono Calm Jeju, 2021이영인
◾ Jin Gyeong Park, Myeongjun Ji, Young-In Lee, and Yong-Ho choa, Novel approach to phosphor-in-glass (PiG) technology for application in automotive lighting, 2021 3rd International Symposium on Innovation in Materials Processing, Sono Calm Jeju, 2021이영인
◾ Eui Seon Lee, Youn Ji Heo, Jeong Hyun Kim, Young-In Lee, Young-Keun Jeong, and Sung-Tag Oh, Microstructural characterizataion and densification of W-1 wt% La2O3 composite powders synthesized by ultrasonic spray pyrolysis, 2021 3rd International Symposium on Innovation in Materials Processing, Sono Calm Jeju, 2021이영인
◾ Jeong Hyun Kim, Myeongjun Ji, Cheol-Hui Ryu, Dong Hoon Lee, and Young-In Lee, Effect of sub-micron Fe precursor on the fabrication of Nd2Fe14Bmagnet in reduction-diffusion process and sintering, 2021 3rd International Symposium on Innovation in Materials Processing, Sono Calm Jeju, 2021이영인
◾ Myeongjun Ji, Jeong Hyun Kim, Cheol-Hui Ryu, and Young-In Lee, Defect engineering of metal oxides for the improvement of piezocatalysis and piezo-photocatalysis performance, 2021 3rd International Symposium on Innovation in Materials Processing, Sono Calm Jeju, 2021이영인
◾ Mi-Jeong Park, Myeongjun Ji, Jeong Hyun Kim, Cheol-Hui Ryu, and Young-In Lee, Versatile and Facile Self-assembled Fabrication of Hydrophilic polymer substrate using metal oxide nanoparticle immobilized Electrospun fibers, 2021 3rd International Symposium on Innovation in Materials Processing, Sono Calm Jeju, 2021이영인
◾ Myeongjun Ji, Jeong Hyun Kim, Cheol-Hui Ryu and Young-In Lee, Synthesis of Oxygen-deficient Black BaTiO3 Nanoparticles and its piezocatalytic activity under Ultrasonic and Magnetic stirring, The Korean Institute of Metal and Materials, Fall conference 2021, 제주국제컨벤션센터, 2021이영인
◾ Jeong Hyun Kim, Myeongjun Ji, Jongmin Byun, Sung-Tag Oh, and Young-In Lee, Effect of Y2O3 Addition on the Sintering Behavior and Mechanical Properties of W-based Alloy with Homogeneously Dispersed Y2O3 nanoparticles, The Korean Institute of Metal and Materials, Fall conference 2021, 제주국제컨벤션센터, 2021이영인
◾ Cheol-Hui Ryu, Myeongjun Ji, Hyunjoo Choi, and Young-In Lee, Large Scale Synthesis of Cu2-xSe nanopowder for thermoelectric bulk materials with nanosized grains, The Korean Institute of Metal and Materials, Fall conference 2021, 제주국제컨벤션센터, 2021이영인
◾ 박진경, 지명준, 이영인, Adhesive resin composites with ceramic nanoparticles for enhanced light extraction efficiency of sandwiched LED device structure, The Korean Institute of Surface Engineering 2021 Spring Meeting, 부산대학교 인덕관 대회의실, 2021이영인
◾ 류철희, 지명준, 김정현, 이영인, Gram-scale synthesis of size-controlled Cu powders via high concentration Cu ion precursor, Materials Research Society of Korea, Spring conference 2021, 광주 김대중컨벤션센터, 2021이영인
◾ 지명준, 김정현, 류철희, 이영인, Facile synthesis of oxygen-deficient black BaTiO3 nanoparticles using black TiO2 for piezo-catalytic application, Materials Research Society of Korea, Spring conference 2021, 광주 김대중컨벤션센터, 2021이영인
◾ 김정현, 변종민, 정영근, 오승탁, 이영인, Fabrication of homogeneous W-Y2O3 composite with controlled Y2O3 fraction by USP, Materials Research Society of Korea, Spring conference 2021, 광주 김대중컨벤션센터, 2021이영인
◾ 박미정, 지명준, 고윤택, 이영인, Versatile and facile self-assembled fabrication of photocatalytic water purification membrane, 2021 Spring conference of Korean Powder Metallurgy Institute, 여수 엑스포컨벤션센터, 2021이영인
◾ 허연지, 이의선, 김정현, 이영인, 정영근, 오승탁, Synthesis of W powders with nano-sized oxide dispersion by USP and polymer solution route, 2021 Spring conference of Korean Powder Metallurgy Institute, 여수 엑스포컨벤션센터, 2021이영인
◾ 김정현, 변종민, 정영근, 오승탁, 이영인, Fabrication and mechanical property of W-Y2O3 composite with controlled Y2O3 fraction via ultrasonic spray pyrolysis, 2021 Spring conference of Korean Powder Metallurgy Institute, 여수 엑스포컨벤션센터, 2021이영인
◾ 지명준, 김정현, 류철희, 김하진, 이영인, Facile synthesis and piezo-catalytic application of oxygen-deficient black BaTiO3 nanoparticles, 2021 Spring conference of Korean Powder Metallurgy Institute, 여수 엑스포컨벤션센터, 2021이영인
◾ 류철희, 지명준, 김정현, 이영인, Size-controlled synthesis of Cu powders via high concentration Cu complex ion precursors, 2021 Spring conference of Korean Powder Metallurgy Institute, 여수 엑스포컨벤션센터, 2021이영인
◾ 전희연, 지명준, 김정현, 류철희, 이영인, Synthesis of Pt nanotube for flexible electrodes using electrospinning method, 2021 Spring conference of Korean Powder Metallurgy Institute, 여수 엑스포컨벤션센터, 2021이영인
◾ 이의선, 허연지, 이영인, 정영근, 오승탁, Synthesis of W powders with hybrid dispersion controlled Y2O3-La2O3 nanoparticles, 2021 Spring conference of Korean Powder Metallurgy Institute, 여수 엑스포컨벤션센터, 2021이영인
◾ 이의선, 이규휘, 조현희, 김정현, 이영인, 정영근, 오승탁, 나노크기 Y2O3-La2O3 입자분산 텅스텐 복합분말 합성, 2021년 한국재료학회 춘추계 통합 학술대회 초록집, 제주, 2020이영인
◾ Myeongjun Ji, Young-In Lee, Synthesis of BaTiO3 with controllable oxygen vacancies using black TiO2 and their photocatalytic activity, 2020년 한국재료학회 춘추계 통합 학술대회 초록집, 제주, 2020이영인
◾ Myeongjun Ji, Young-In Lee, Facile Synthesis of Black TiO2 Microspheres by Ultrasonic Spray Pyrolysis Method and Their Visible-light-driven Photocatalytic Activities, 2020년 한국재료학회 춘추계 통합 학술대회 초록집, 제주, 2020이영인
◾ Mi-jeong Park, Myeongjun Ji, Yun Taek Ko, Jin Gyeong Park and Young-In Lee, Morphology Control of One-dimensional GaN Nanostructures by Varying the Crystallinity of Electrospun Ga2O3 Nanofibers, 16th International Symposium on Novel and Nano Materials, Jeju, 2020이영인
◾ Myeongjun Ji, Hee Yeon Jeon and Young-In Lee, Facile Synthesis of Black TiO2 Microspheres by Ultrasonic Spray Pyrolysis Method and Their Visible-light-driven Photocatalytic Activities, 16th International Symposium on Novel and Nano Materials, Jeju, 2020이영인
◾ Cheol-Hui Ryu, Jeong Hyun Kim, Mijeong Park, Myeongjun Ji, Young-In Lee, Large Scale Synthesis of Cu2Se Nanoparticles Using High Concentration Metal Complex Precursors and Ultrasound Energy for Thermoelectric Applications, 16th International Symposium on Novel and Nano Materials, Jeju, 2020이영인
◾ Hyeonhui Jo, Young-In Lee, Young-Keun Jeong, Sung-Tag Oh, Synthesis and Sintering of Y2O3-dispersed W Powders Prepared by Ultrasonic Spray Pyrolysis, 16th International Symposium on Novel and Nano Materials, Jeju, 2020이영인
◾ Myeongjun Ji, Jeong Hyun Kim, Cheol-Hui Ryu, Mi-Jeong Park, Young-In Lee, Synthesis of BaTiO3 with Controllable Oxygen Vacancies using Black TiO2 and their Photocatalytic Activity, 16th International Symposium on Novel and Nano Materials, Jeju, 2020이영인
◾ Jeong Hyun Kim, Gyuhwi Lee, Hyeonhui Jo, Young-In Lee, Young-Keun Jeong, Sung-Tag Oh, Synthesis of Fine Tungsten Powders by Ultrasonic Spray Pyrolysis, 16th International Symposium on Novel and Nano Materials, Jeju, 2020이영인
◾ Eui Seon Lee, Gyuhwi Lee, Young-In Lee, Young-Keun Jeong, Sung-Tag Oh, Synthesis of W Powders with Hybrid Dispersion Controlled Y2O3-La2O3 Nanoparticles, 16th International Symposium on Novel and Nano Materials, Jeju, 2020이영인
◾ Jeong Hyun Kim, Myeongjun Ji, Jongmin Byun, Young-Keun Jeong, Sung-Tag Oh, Young-In Lee, Fabrication of Tungsten-based Alloy with Homogeneously Dispersed Yttrium Oxide Nanoparticles by Ultrasonic Spray Pyrolysis and Spark Plasma Sintering, 16th International Symposium on Novel and Nano Materials, Jeju, 2020이영인
◾ Gyuhwi Lee, Jongmin Byun, Young-In Lee, Byung Joon Choi, Hogyoung Kim and Sung-Tag Oh, Effect of Sintering Condition on Microstructure and Properties of Bi2Te3-based Thermoelectric Alloy Powders, 16th International Symposium on Novel and Nano Materials, Jeju, 2020이영인
◾ Jae Wook Lee, Myeong Jun Jung, Seung Chul Shin, Ju-Yeon Han, Myeong Jun Ji, Seung Hee Ko, Jong Min Byun, Jeong Hwan Han, Young-In Lee, Doh-Hyung Riu, Sung-Tag Oh, and Byung Joon Choi, Atomic interface engineering of thermoelectric materials by atomic layer deposition, International Symposium on Innovation in Materials Processing, Phoenix Jeju, 2019이영인
◾ Ju-Yeon Han, Jong Min Byun, Young-In Lee, Byung Joon Choi, Hogyoung Kim, and Sung-Tag Oh, Dilatometric Analysis of the Sintering Behavior of Bi2Te3 Thermoelectric Powders, International Symposium on Innovation in Materials Processing, Phoenix Jeju, 2019이영인
◾ Myeong-Jun Ji, Eung-Ryong Kim, Jeong-Hyun Kim, Cheol-Hui Ryu, and Young-In Lee, Direct Synthesis of Black TiO2 Microspheres by Ultrasonic Spray Pyrolysis and its Photocatalytic Activity in the Visible light region, International Symposium on Innovation in Materials Processing, Phoenix Jeju, 2019이영인
◾ Cheol-Hui Ryu, Jeong Hyun Kim, Myeong-Jun Ji, Eung-Ryong Kim, and Young-In Lee, Effect of Pyrolysis Conditions on the Physicochemical Properties of Graphitic Carbon Nitride for Visible-light-driven Photocatalytic Degradation, International Symposium on Innovation in Materials Processing, Phoenix Jeju, 2019이영인
◾ Eung-Ryong Kim, Myeong-Jun Ji, Jung-hyun Kim, Chul-Hui Ryu, and Young-In Lee, Synthesis and Physicochemical Properties of Ti3+ Self-doped Titanium Dioxide Nanofibers Using a Reductant-assisted Electrospinning Process, International Symposium on Innovation in Materials Processing, Phoenix Jeju, 2019이영인
◾ Jeong Hyun Kim, Gyuhwi Lee, Ju-Yeon Han, Hyunji Kang, Young-In Lee, Young-Keun Jeong, Sung-Tag Oh, Synthesis of Tungsten Powders with Nano-sized Oxide Dispersion by Ultrasonic Spray Pyrolysis and Polymer Solution Method, International Symposium on Innovation in Materials Processing, Phoenix Jeju, 2019이영인
◾ Ju-Yeon Han, Jong Min Byun, Young-In Lee, Byung Joon Choi, Hogyoung Kim, Sung-Tag Oh, Consolidation and Properties of Bi2Te3 Thermoelectric Powders by Pressureless and Spark Plasma Sintering, The 5th International Conference on Advanced Electromaterials, Ramada Plaza Jeju Hotel, 2019이영인
◾ 한주연, 김정현, 이영인, 정영근, 오승탁, Fabrication of Tungsten Composite Powders Dispersed with Oxide Nanaoparticles by Chemical Solution Route, 2019 추계 한국재료학회 초록집, 삼척 쏠비치 호텔 & 리조트, 2019이영인
◾ 지명준, 이영인, Synthesis and Photocatalytic Activities of Brookite TiO2 Nanorods Using Salt-assisted Spray pyrolysis, 2019 추계 한국재료학회 초록집, 삼척 쏠비치 호텔 & 리조트, 2019이영인
◾ 임지현, 장웅식, 이영인, 왕동환, Effect of Black TiO2 nanoparticle mixed Electron Transport Layer in Inverted Perovskite Solar Cells, 2019 추계 고분자학회 초록집, 제주 국제 컨벤션 센터, 2019이영인
◾ 지명준, 유재현, 이영인, Photocatalytic Activities of Brookite TiO2 Nanorods Synthesized by a Facile Salt-assisted Ultrasonic Spray Pyrolysis Method, 2019 춘계 한국재료학회 초록집, 평창 알펜시아 리조트, 2019이영인
◾ 유재현, 지명준, 이영인, Controllable Synthesis of Nano-sized Hierarchical CuS via Direct Sulfurization and its Photocatalyst Properties, 2019 춘계 한국분말야금학회 초록집, 여수 엑스포 컨벤션 센터, 2019이영인
◾ 지명준, 유재현, 이영인, Electrospun Ag/ZnO nanofibers and study on influence of factor for photocatalytic property improvement, 2019 춘계 한국분말야금학회지, 여수 엑스포 컨벤션 센터, 2019이영인
◾ Young Hwangbo, and Young-In Lee, Simple Synthesis of Pure brookite TiO2 Nanoparticles via a Salt-Assisted Ultrasonic Spray Pyrolysis, 2017 추계 분말야금학회 초록집, 제주, 2017이영인
◾ Seung-Yeon Kim, Young Hwangbo, and Young-In Lee, Synthesis and Photocatalytic Activity of Ultrafine Sodium Titanate Nanowires, International Symposium on Innovation in Materials Processing, Jeju, 2017이영인
◾ Jae-Hyun Yoo, Sung-Hyun Jeon, Young Hwangbo, and Young-In Lee, Synthesis and Photocatalytic Activity of Hierarchical Copper Sulfide Spheres through Simple Chemical Transformation, International Symposium on Innovation in Materials Processing, Jeju, 2017이영인
◾ Myung-Jun Ji, and Young-In Lee, Selective Transformation of Cu Nanowires to Cu2S or CuS Nanostructures and the Roles of the Kirkendall Effect and Anion Exchange Reaction, International Symposium on Innovation in Materials Processing, Jeju, 2017이영인
◾ Young Hwangbo, Jae-Hyun Yoo and Young-In Lee, Chemical Transformation of CuO Microspheres to CuS Ball-flowers and Their Photocatalytic Activity, 9th International Conference on Materials for Advanced Technologies, Singapore, 2017이영인
◾ 황보영, 최요민, 지명준, 유재현, 이영인, Facile and Selective Synthesis of ZnO Hollow or Crumpled Microspheres and Their Photocatalytic Activities, 2017 춘계 분말야금학회 초록집, 경주, 2017이영인
◾ 유재현, 황보영, 전성현, 이영인, Chemical Transformation of CuO Microspheres to CuS Ball-flowers and Their Photocatalytic Activity, 2017 춘계 분말야금학회 초록집, 경주, 2017이영인
◾ 황보영, 김승연, 이영인, Synthesis and Photocatalytic Activities of TiO2/TiOF2 Nanocomposites with Controlled Phase Fractions via Ultrasonic Spray Pyrolysis, 2017 춘계 분말야금학회 초록집, 경주, 2017이영인
◾ 황보영, 유재현, 전성현, 김승연, 지명준, 이영인, Facile Synthesis of Pure Tetragonal Zirconia Nanoparticles Using a Salt-assisted Ultrasonic Spray Pyrolysis Combined with Citrate Precursor Method, 2017 춘계 분말야금학회 초록집, 경주, 2017이영인
◾ Y. Hwangbo, J.H. Yoo, Young-In Lee, Facile synthesis of pure tetragonal zirconia nanoparticles using a modified salt-assisted ultrasonic spray pyrolysis, 5th International Conference on Multifunctional, Hybrid and Nanomaterials, Lisbon, Portugal, 2017이영인
◾ 유재현, 황보영, 이영인, Selective transformation of Cu nanowires to Cu2S or CuS nanostructures, Fall Conference of Korean Powder Metallurgy Institute, 부산 해운대 그랜드 호, 2016이영인
◾ 황보영, 유재현, 이영인, Effect of Salt Types on the morphology and crystal structure of TiO2 Nanoparticles Prepared by Spray Pyrolysis, Fall Conference of Korean Powder Metallurgy Institute, 부산 해운대 그랜드 호텔, 2016이영인
◾ Young Hwangbo, Jae-Hyun Yoo, Young-In Lee, Synthesis and Optical Properties of TiO2 Nanoparticles via Salt-Assisted Ultrasonic Spray Pyrolysis, International Conference on Electronic Materials and Nanotechnology for Green Environment, Ramada Plaza Jeju Hotel, 2016이영인
◾ Jae Hyun Yoo, Min-Young Cho, Young-In Lee, Synthesis and Photocatalytic Activities of Electrospun Bi2O3 Nanofibers with α-β Phase Heterojunction, International Conference on Electronic Materials and Nanotechnology for Green Environment, Ramada Plaza Jeju Hotel, 2016이영인
◾ Young Hwangbo, So-Yeon Cho, Min-Young Cho and Young-In Lee, Electrospun CoFe2O4 Nanofibers as High Capacity Anode Materials for Li-ion Batteries, Nanokorea 2016, Kintex, 2016이영인
◾ Seil Kim, Yoseb Song, Young-In Lee, Yong-Ho Choa, Thermochemical Hydrogen Sensor Based on Pt Nanofiber Catalyst Coated Textured Shape Thermoelectric Thin Film, 14th International Symposium on Novel and Nano Materials, Danubius Hotel Helia, Budapest, 2016이영인
◾ J. G. Park, W. J. Kim, I. J. Lee, Y.-H. Choa, Y.-I. Lee, New Type of Adhesive Resin with Ceramic Nanoparticle for Enhancement in Light Extraction Efficiency of Sandwiched LED Device Structure, Proceedings of the 15th International Symposium on the Science and Technology of Lighting, Kyoto University, 2016이영인
◾ 황보영, 임규담, 이영, Photocatalytic Degradation Promoted by α-β Phase Junction of Electrospun Bi2O3 nanofibers, Spring meeting of Materials Research Society of Korea, 여수 디오션 리조, 2016이영인
◾ 임규담, 조소연, 조민영, 이영인, Enhancement of Photocatalytic Activity for Electrospun Bi2O3 Nanoifbers via Phase Junction, Spring Conference of Korean Powder Metallurgy Institute, 경주 현대호텔, 2016이영인
◾ 황보영, 유재현, 이영인, Synthesis of TiO2 Nanoparticles via a Salt-Assisted Ultrasonic Spray Pyrolysis, Spring Conference of Korean Powder Metallurgy Institute, 경주 현대호텔, 2016이영인
◾ Young Hwangbo, Kyu-Dam Lim, Sung-Jin Moon, Young-In Lee, Synthesis of ZrO2 Nanoparticles with high refractive index by a Salt-Assisted Ultrasonic Spray Pyrolysis, 2015 추계 한국재료학회 논문집, 부산, 2015이영인
◾ 유재현, 임규담, 황보영, 이영인, Selective Chemical Transformation of Cu Nanowires to Cu2S or CuS Nanostructures, 2015 추계 분말야금학회 논문집, 여수, 2015이영인
◾ 황보영, 유재현, 문성진, 이영인, Morphology-Controlled Synthesis of ZrO2 Nanoparticles via a Salt-Assisted Ultrasonic Pyrolysis, 2015 추계 분말야금학회 논문집, 여수, 2015이영인
◾ 임규담, 조소연, 이영인, Electrospun NiFe2O4 Nanofibers as High Capacity Anode Materials for Li-Ion Batteries, 2015 추계 분말야금학회 논문집, 여수, 2015이영인
◾ Young Hwangbo, Gyu-Dam Lim, Jaehyun Yoo, Taeyeon Hwang, and Young-In Lee, Synthesis of ZrO2 Nanoparticles by a Salt-Assisted Ultrasonic Spray Pyrolysis for Polymer based Nanocomposites with High Refractive Index, The 11th Pacific Rim Conference of Ceramic Societies, Jeju, 2015이영인
◾ Seil Kim, Kee-Ryung Park, Hyo-Ryoung Lim, Young-In Lee, Sung-Oong Kang, and Yong-Ho Choa, Synthesis and Characterization of Silver Nanowire based Intermetallic AgxSbyTez Nanotube, The 11th Pacific Rim Conference of Ceramic Societies, Jeju, 2015이영인
◾ Young-In Lee, Synthesis of Nickel Oxide Nanowires with Controlled Microstructures by Chemical Transformation of Nickel Nanowires, NANO KOREA 2015, Coex, Seoul, 2015이영인
◾ 임규담, 유재현, 황보영, Synthesis of silver nanofibers via an electrospinning process and two-step equential thermal treatment and their application to transparent conductive electrode, 2015 춘계 분말야금학회논문집, 경주, 2015이영인
◾ 황보영, 이영인, Synthesis of metal oxide-coated conductive metal powders and their application to front electrodes for solar cells, 2015 춘계 분말야금학회 논문집, 경주, 2015이영인
◾ Young-In Lee, Dae-Hwan Jang, Yong-Ho Choa, Synthesis, Morphology Control and Electromagnetic Wave Absorption Properties of Electrospun FeCo Alloy Nanofibers, International Conference on Electronic Materials and Nanotechnology for Green Environment, Jeju, 2014이영인
◾ 황보영, 이영인, 최요민, 좌용호, Metallic Nanoparticle-Based Fabrication and Optical Properties of CIGS2 Absorber Layer for Solar Cells, 2014 추계 분말야금학회 논문집, 여수, 2014이영인
◾ 임규담, 이영인, 김세일, 좌용호, Fabrication of Hydrogen Gas Sensors Based on Thermoelectric Nanowire Array and Their Sensing Property, 2014 추계 분말야금학회 논문집, 여수, 2014이영인
◾ Seil Kim, Young-In Lee , Hyo Ryoung Lim, and Yong-Ho Choa, Diameter Dependence thermoelectric properties of chalcognide nanowire arrays in anodic aluminium oxide template, International Conference on Microelectronics and Plasma Technology 2014, Gunsan, 2014이영인
◾ Seil Kim, Young-Tae Kwon, Yong-Ho Choa and Young-In Lee, Low Temperature and Rapid Sintering of Inkjet Printed Conductive Copper Patterns for Flexible Electronics, International Conference on Microelectronics and Plasma Technology 2014, Gunsan, 2014이영인
◾ Young-In Lee, Seil Kim, Nosang V. Myung and Yong-Ho Choa, Size Dependence of Properties in Cupric Oxide Nanotubes Synthesized from Electrodeposited Copper Nanowires, Nanokorea 2014, Coex, Seoul, 2014이영인
◾ Seil Kim, Young In-Lee, Hyo-Ryoung Lim and Yong-Ho Choa, Thermoelectric Characterization of Heterostructure BixTe1-x nanowire Synthesized by Electrochemical Deposition via Annealing process, Nanokorea 2014, Coex, Seoul, 2014이영인
◾ Seil Kim, Young-In Lee, Yo-Min Choi, Lim Hyo-ryoung, Myung Vincent Nosang, and Choa Yong-ho, Thermochemical Hydrogen Sensor Based on Thermoelectric Nanowire Arrays and its Sensing Characteristics, 2014년 한국세라믹학회 춘계학술대회 논문집, 일산, 2014이영인
◾ 임규담, 이영인, Silver nanoplatelet-based conductive features direct printed on a flexible substrate, 2014 춘계 분말야금학회지, 경주, 2014이영인
Patents
https://sites.google.com/view/seoultech-fnmr/achievement/patents
=====================================================================================================================================
=====================================================================================================================================
Projects
https://sites.google.com/view/seoultech-fnmr/research-projects/current-projects
=====================================================================================================================================
=====================================================================================================================================
◾ 원자단위 계면 설계 기반 차세대 열전 에너지 변환 소재 개발, 산학협력단, 2019.06.~2022.02.이영인
◾ 염 보조 초음파 분무 열분해 공정으로 합성된 TiO2 나노입자의 특성에 열분해 온도가 미치는 영향, 산학협력단, 2019.03.~2019.08.이영인
◾ 염 보조 초음파 분무 열분해법을 이용한 TiO2 나노입자의 합성, 산학협력단, 2018.08.~2019.07.이영인
◾ Black TiO2 나노입자 직접 합성 기술 및 가시광 감응형 광촉매 필터 응용 기술 연구, 한국연구재단, 2018.06.~2022.05.이영인
◾ 초음파 분무 열분해 공정과 질화처리를 이용한 GaN 분말의 합성과 광학적 성질, 산학협력단, 2018.01.~2018.05.이영인
◾ 염 보조 초음파 분무 열분해 공정을 이용한 BaTiO3 나노입자의 합성과 광학적 성질, 산학협력단, 2017.03.~2018.02.이영인
◾ 가시광 투과율 70%, 적외선 차단율 90%급의 에너지 효율 향상을 위한 원도우용 칼코지나이드 기반 세라믹 복합 코팅소재 개발, 한국산업기술평가관리원, 2016.07.~2018.12.이영인
◾ 백색광 구현용 희토류 첨가 형광체 개발, 한국생산기술연구원, 2016.03.~2016.10.이영인
◾ BaTiO3-Fe 코어 쉘 나노섬유의 합성 및 전자파 흡수 특성, 산학협력단, 2015.09.~2016.02.이영인
◾ Phosphor in glass (PIG) 기초 소재 분석 및 신규 조성 개발, 주식회사 지앤티, 2015.08.~2015.12.이영인
◾ 광화학적 물분해 기반 수소제조용 1차원 산화물-질화물 고용체 나노구조 합성 기술 개발, 한국연구재단, 2015.07.~2018.06.이영인
◾ 양극산화 알루미나 주형 기반의 전해 증착법을 이용한 니켈 나노선의 합성 및 특성 연구, 산학협력단, 2015.05.~2015.12.이영인
◾ 굴절률 1.70이상의 유무기 하이브리드 고굴절 코팅액을 이용한 LCD용 고휘도 프리즘 필름 개발, 한국산업기술평가관리원, 2014.06.~2017.05.이영인
◾ 산화물이 코팅된 은 나노입자를 이용한 실리콘 태양전지의 효율 개선, 산학협력단, 2014.04.~2014.12.이영인
◾ 전기방사 공정을 이용한 직경 제어된 SnO2 나노섬유의 합성, 산학협력단, 2014.04.~2014.12.이영인
◾ 초음파분무 열분해법을 이용한 SOFS용 GDC 복합체 전해질의 제조 및 특성 평가, 산학협력단, 2014.04.~2014.08.이영인
Awarded
◾ Spray pyrolysis-based synthesis of pure molybdenum powder with nanoscale primary particles and its sintering characteristics, Best poster award, asia powder metallurgy association, 2023이영인
◾ High-performance solar steam generation of black TiO2-x with high-concentration bulk oxygen vacancies, 아스플로 우수발표논문상, 한국분말재료학회, 2023이영인
◾ 우수교육상(전임), 2022학년도 교육분야 우수교원, 서울과학기술대학교, 2023이영인
◾ Optimization of atmospheric plasma treatment parameters for hydrophilic surface functionalization of non-woven fabrics through design of experiment, ASFLOW Best Presentation Award, International Symposium on Novel and Nano Materials, 2022이영인
◾ 최우수발표상, Comparative Analysis of Nd2Fe14B Synthesized through Different Reduction-Diffusion Reaction Routes Depending on Iron Precursor Particle Size, 한국자기학회, 2022이영인
◾ Facile synthesis of oxygen-deficient black TiO2-x microspheres with excellent photothermal conversion efficiency through ultrasonic spray pyrolysis, Yongin Electronics Best Presentation Award, International Symposium on Novel and Nano Materials, 2022이영인
◾ 볼 밀링을 이용한 WO3-NiO-CuO 혼합분말 제조 및 수소환원 공정, 우수발표논문상, 한국재료학회, 2022이영인
◾ Mass production of Cu2-xSe nanopowder for thermoelectric bulk materials with nanosized grains via high concentration metal complex precursor, 포스터 발표 우수상, 대한금속재료학회, 2022이영인
◾ 방전 플라즈마 소결 및 열간등압 열처리를 통한 산화물 분산 텅스텐 소결체의 제조, 우수발표논문상, 한국분말재료학회, 2022이영인
◾ Synthesis of W Powders with Hybrid Dispersion Controlled Y2O3-La2O3 Nanoparticles, ISNNM2020 Best Presentation Award, Korean Powder Metallurgy Institute(KPMI), TU Wien, Institute of Metallurgy and Materials Science of Polish Academy of Sciences, 2020이영인
◾ 전기방사를 이용하여 합성한 BiVO4 나노섬유의 미세구조와 광촉매 특성에 하소 온도가 미치는 영향, 논문상, 한국분말야금학회, 2020이영인
◾ Synthesis of BaTiO3 with Controllable Oxygen Vacancies using Black TiO2 and their Photocatalytic Activity, ISNNM2020 Best Presentation Award, Korean Powder Metallurgy Institute(KPMI), TU Wien, Institute of Metallurgy and Materials Science of Polish Academy of Sciences, 2020이영인
◾ Fabrication of Tungsten-based Alloy with Homogeneously Dispersed Yttrium Oxide Nanoparticles by Ultrasonic Spray Pyrolysis and Spark Plasma Sintering, ISNNM2020 Best Presentation Award, Korean Powder Metallurgy Institute(KPMI), TU Wien, Institute of Metallurgy and Materials Science of Polish Academy of Sciences, 2020이영인
◾ 분말야금 분야의 발전에 기여, 신한다이아몬드상, 한국분말야금학회, 2019이영인
◾ Electrospun β-Ga2O3 Nanofibers and Their Photocatalytic Degradation Efficiencies for PFOA, Best presentation award, Korean Powder Metallurgy Institute, 2018이영인
◾ Synthesis of ZnO-ZnS core-shell structures by a simple chemical transformation and their photocatalytic properties, Best presentation award, Korean Powder Metallurgy Institute, 2018이영인
◾ Simple Synthesis of Pure brookite TiO2 Nanoparticles via a Salt-Assisted Ultrasonic Spray Pyrolysis, 신한다이아몬드 우수발표논문상, Korea Powder Metallurgy Institute, 2017이영인
◾ 논문심사를 통한 학회지 발전에 기여, Best reviewer, 한국분말야금학회, 2016이영인
◾ Thermochemical hydrogen sensor based on Pt nanofiber catalyst coated textured shape thermoelectric f, Best poster award, The oragnizing committee of the 14th international symposium on novel and nano materials (ISNMM), 2016이영인
◾ Photocatalytic degradation promoted by a-b phase junction of electrospun Bi2O3 nanofibers, 한국재료학회 춘계학술대회 우수발표논문상, 한국재료학회, 2016이영인
◾ 염 보조 초음파 분무 열분해 공정을 이용한 TiO2 나노입자의 합성, 한국분말야금학회 춘계학술대회 우수 포스터상, 한국분말야금학회, 2016이영인
◾ 염 보조 초음파 분무 열분해 공정을 이용한 ZrO2 나노입자의 형상제어 합성, 신한다이아몬드 우수포스터상, 한국분말야금학회, 2015이영인
◾ 산화물이 코팅된 전도성 금속 분말의 제조 및 태양전지 전면 전극으로의 응용, 우수 포스터상, 한국분말야금학회, 2015이영인
◾ 열전 나노와이어 기반의 수소 센서 제작 및 센싱 특성, 우수포스터상, 한국분말야금학회, 2014이영인