Name Park, Keun
Position professor
Tel +82-2-970-6358
E-mail kpark@seoultech.ac.kr
Profile Download
Research Areas
- Multyphysics simulation using finite element method
- Micro/nano pattering using ultrasonic vibration energy
- Polymer processing (including injection molding, thermoforming, etc.)
- Metal forming (including forging, extrusion, etc.)
- Rapid fabrication using additive manufacturing (3D printing)
Teaching
CAE, CAD, Numerical analysis, Mechanics of material, Finite element method, Capstone design
Selected Publications
H. J. Lee and K. Park, "Development of hybrid surfaces with tunable wettability by selective surface modifications," Materials, Vol. 9, No. 3, 136 (2016).

H. J. Bae, H. J. Lee and K. Park, "Design and analysis of ultrasonic horn for polymer sheet forming," Int. J. Precis. Engng. Manuf. Green Technol., Vol. 3, No. 1, pp. 49~54 (2016).

J. H. Jeong, H. K. Lee, K. Park and J. B. Kim, "An investigation into the anti-releasing performance of a serrated bolt," J. Mech. Sci. Tech., Vol. 29, No. 2, pp. 5127~5132 (2015).

J. H. Park, J. B. Kim and K. Park, "Fully coupled numerical analysis of high frequency induction heating and warm sheet metal forming," Steel Research Int., Vol. 86, No. 8, pp.877~885. (2015).

W. Jung, H. J. Lee and K. Park, "Micropattern replication characteristics in selective ultrasonic imprinting using negative masks," Int. J. Precis. Engng. Manuf., Vol. 16, No. 9, pp. 1999~2004 (2015).

J. H. Park, K. Y. Lee and K. Park, "Coupled numerical analysis to investigate the heating mechanism of ultrasonic imprint lithography," Ultrasonics, Vol. 60, pp.96~102 (2015).

K. Park, C. H. Lee and S. W. Ra, "Optical simulation of omnidirectional inspection system for screw threads," Key Engng. Mater., Vol. 625, pp. 706~711 (2015).

H. J. Lee and K. Park, "Development of composite micro-patterns on polymer film using repetitive ultrasonic imprinting," Int. J. Precis. Engng. Manuf. Green Technol., Vol. 1, No. 4, pp. 341~345 (2014).

W. Jung and K. Park, "Selective ultrasonic imprinting for micropattern replication on predefined area," Ultrasonics, Vol. 54, No. 6, pp. 1495~1503 (2014).

K. M. Kim and K. Park, "Numerical investigation on vibration characteristics of micro-speaker diaphragm considering thermoforming effects," J. Mech. Sci. Tech., Vol. 27, No. 10, pp. 2923~2928 (2013).

Y. H. Cho, Y. S. Seo, I. Y. Moon, B. H. Kim K. Park, Facile fabrication of superhydrophobic poly(methyl methacrylate) substrates using ultrasonic imprinting," J. Micromech. Microeng., Vol. 23, No. 5, 055019 (2013).

W. Jung, J. Ra and K. Park, "Design optimization of an ultrasonic horn for micro-pattern replication," Int. J. Precis. Engng. Manuf., Vol. 13, No. 12, pp. 2195~2201 (2012).

Y. S. Seo and K. Park, "Direct patterning of micro-features on a polymer substrate using ultrasonic vibration," Microsyst. Technol., Vol. 18, No. 2, pp. 2195~2201 (2012).

J. B. Kim, W. S. Seo and K. Park, "Damage prediction in the multistep forging process of subminiature screws," Int. J. Precis. Engng. Manuf., Vol. 13, No. 9, pp. 1629~1624 (2012).

K. Park, Y. S. Seo and D. H. Sohn, “Automated mold heating system using high-frequency induction with feedback temperature control,” Int. Polym. Proc., Vol. 24, No. 5, pp. 490~497 (2011).

H. Eom and K. Park, "Integrated numerical analysis to evaluate replication characteristics of micro channels in a locally heated mold by selective induction,” Int. J. Precis. Engng. Manuf., Vol. 12, No. 1, pp. 53~60 (2011).

D. H. Kim, K. Park, M. J. Park, and D. Y. Jang, "Numerical analysis for verifying the performance of lens system in a scanning electron microscope," Optik, Vol. 121, No. 4, pp. 330~338 (2010).

K. Park and S. I. Lee, “Localized mold heating with the aid of selective induction for injection molding of high aspect ratio microfeatures," J. Micromech. Microeng., Vol. 20, No. 3, 035002. (2010).

K. Park, D. H. Sohn and K. H. Cho, “Eliminating weldlines of an injection molded part with the aid of high-frequency induction heating,” J. Mech. Sci. Tech., Vol. 24, No. 1, pp. 149~152. (2010).

H. Eom and K. Park, “Fully-coupled numerical analysis of high-frequency induction heating for thin-wall injection molding,” Polym. Plast. Techol. Eng., Vol. 48, No. 10, pp. 1070~1077. (2009).

K. Park and Y. S. Kim, "Effect of mold temperature on mechanical properties of an injection-molded part with microfeatures,” J. Polym. Engng., Vol. 29, No. 1-3, pp. 135-154 (2009).

K. Park and W. Joo, “Numerical evaluation of a plastic lens by coupling injection molding analysis with optical simulation,” Jpn. J. Appl. Phys., Vol. 47, No. 11, pp. 8402~8407 (2008).

M. J. Park, D. H. Kim, K. Park, D. Y. Jang, and D. C. Han, "Design and fabrication of a scanning electron microscope using a finite element analysis for electron optical system," J. Mech. Sci. Tech., Vol. 22, No. 9, pp. 1734~1746 (2008)

K. Park, Y. S. Kim, C. S. Kim, and H. J. Park, “Integrated application of CAD/CAM/CAE/RP for rapid development of a humanoid biped robot,” J. Mat. Proc. Tech., Vol. 187-188, pp. 609 ~ 613 (2007).

K. Park, B. Kim, and D. Yao, "Numerical simulation for injection molding with a rapidly heated mold, Part II: Birefringence prediction,” Polym. Plast. Techol. Eng., Vol. 45, No. 8, pp. 903~909 (2006).

K. Park, B. Kim, and D. Yao, "Numerical simulation for injection molding with a rapidly heated mold, Part I: Flow simulation for thin wall parts,” Polym. Plast. Techol. Eng., Vol. 45, No. 8, pp. 897~902 (2006).

K. Park, “A study on flow simulation and deformation analysis for injection-molded plastics parts using solid elements,” Polym. Plast. Techol. Eng., Vol. 43, No. 5, pp. 1569 ~ 1585 (2004).

K. Park and J. H. Ahn, “Design of experiment considering two-way interactions and its application to injection molding processes with numerical analysis,” J. Mat. Proc. Tech. Vol. 146, pp. 221 ~ 227 (2004).

K. Park and S. R. Choi, "Finite element analysis for the lamination process of a precision motor core using progressive stacking dies", J. Mat. Proc. Tech. Vol. 131, pp. 974 ~ 978 (2002).
Journal Papers
- Deformation behavior of re-entrant auxetic metamaterials considering shape transformation effects, Journal of Mechanical Science and Technology, vol.37 No.12 pp.6143~6151, 2023
- Externally motionless triboelectric nanogenerator based on vortex-induced rolling for omnidirectional wind energy harvesting, NANO ENERGY, vol.119, 2023
- Functional morphology change of TPMS structures for design and additive manufacturing of compact heat exchangers, ADDITIVE MANUFACTURING, vol.76, 2023
- Mechanical metamaterials for sensor and actuator applications, International Journal of Precision Engineering and Manufacturing-Green Technology, 2023
- A Study on Fabrication of Curved Molded-Interconnect Device Using Thermoresponsive 4D Printing, Transactions of the Korean Society of Mechanical Engineers, A, vol.47 No.3 pp.229~236, 2023
- Functional gradation of the morphological properties of TPMS channel for enhanced flow performance, Materials & Design, vol.224, 2022
- Conformal Mold Heating and Cooling Using a Carbon Nanotube Film Heater and Additively Manufactured Cellular Metamaterial, INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY, vol.9 No.6 pp.1463~1476, 2022
- Computational homogenization of additively manufactured lightweight structures with multiscale topology optimization, JOURNAL OF COMPUTATIONAL DESIGN AND ENGINEERING, vol.9 No.5 pp.1602~1615, 2022
- Investigating Mechanical Behaviours of PDMS Films under Cyclic Loading, POLYMERS, vol.14 No.12, 2022
- Infrared Heating for Rapid and Localized Shape Transformations of Additively Manufactured Polymer Parts, FRONTIERS IN MATERIALS, vol.9, 2022
- Adaptive Conformal Cooling of Injection Molds Using Additively Manufactured TPMS Structures, POLYMERS, vol.14 No.1, 2022
- Improvement in Cooling Characteristics of Injection Molds Using Microcellular Cooling Structures, 대한기계학회논문집 A, vol.45 No.12 pp.1099~1107, 2021
- Development of functionally graded metamaterial using selective polymerization via digital light processing additive manufacturing, ADDITIVE MANUFACTURING, vol.47, 2021
- Analysis on the Warm Bending Process of Magnesium Alloy Sheet Using Additively Manufactured Polymer Die-Set, 한국정밀공학회지, vol.38 No.10 pp.775~783, 2021
- Lightweight Design of a Vacuum Gripper for Inspection Equipment Using Topology Optimization, 한국정밀공학회지, vol.38 No.9 pp.683~690, 2021
- Multiscale Topology Optimization Combining Density-Based Optimization and Lattice Enhancement for Additive Manufacturing, International Journal of Precision Engineering and Manufacturing - Green Technology, vol.8 No.4 pp.1197~1208, 2021
- Mechanical reinforcement of additive-manufactured constructs using in situ auxiliary heating process, Additive Manufacturing, vol.43, 2021
- Numerical investigation of deposition characteristics of pla on an abs plate using a material extrusion process, Materials, vol.14 No.12, 2021
- Design and additive manufacturing of thermal metamaterial with high thermal resistance and cooling capability, Additive Manufacturing, vol.41, 2021
- Irreversible and repeatable shape transformation of additively manufactured annular composite structures, Materials, vol.14 No.6 pp.1~18, 2021
- Topology Optimization and Additive Manufacturing of Automotive Component by Coupling Kinetic and Structural Analyses, INTERNATIONAL JOURNAL OF AUTOMOTIVE TECHNOLOGY, vol.21 No.6 pp.1455~1463, 2020
- Investigation of the functional characteristics of injection molds with conformal cooling channels, Transactions of the Korean Society of Mechanical Engineers, A, vol.44 No.10 pp.681~688, 2020
- Lightweight design of a sledge frame for para ice hockey using design for additive manufacturing, Journal of the Korean Society for Precision Engineering, vol.37 No.6 pp.407~414, 2020
- A study on thermal and flow characteristics of an injection mold using a detachable core module with embedded heating, Journal of the Korean Society for Precision Engineering, vol.37 No.5 pp.371~379, 2020
- Compressive behavior of soft lattice structures and their application to functional compliance control, ADDITIVE MANUFACTURING, vol.33, 2020
- Energy-efficient micromolding and in-mold compounding using ultrasonic vibration energy with enhanced material flow, MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS, vol.26 No.3 pp.1021~1030, 2020
- 4D printing using anisotropic thermal deformation of 3D-printed thermoplastic parts, MATERIALS DESIGN, vol.188, 2020
- High-frequency induction heating for increase of flow length in polymer/metal hybrid molding, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, vol.33 No.11 pp.5375~5382, 2019
- Screwed micro fluidic connections fabricated by ultrasonic hot embossing and welding, MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS, vol.25 No.10 pp.3825~3834, 2019
- Development of Micropatterns on Curved Surfaces Using Two-Step Ultrasonic Forming, MICROMACHINES, vol.10 No.10, 2019
- Fabrication of Molded Interconnect Devices Using Metal Printing, 대한기계학회논문집 A, vol.43 No.8 pp.583~589, 2019
- Topology Optimization and Additive Manufacturing of Customized Sports Item Considering Orthotropic Anisotropy, INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, vol.20 No.8 pp.1443~1450, 2019
- A Study on Embedded Heating Structure for Plastic-Metal Hybrid Molding, 대한기계학회논문집 A, vol.43 No.2 pp.145~152, 2019
- Ultrasonic thermoforming of a large thermoplastic polyurethane film with the aid of infrared heating, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, vol.31 No.12 pp.5687~5693, 2017
- Design for additive manufacturing of customized cast with porous shell structures, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, vol.31 No.11 pp.5477~5483, 2017
- Investigation on acoustic characteristics of micro-speaker diaphragm according to corrugation depth using finite element analysis, Journal of the Korean Society for Precision Engineering, vol.34 No.8 pp.569~574, 2017
- Investigation of bending stiffness of porous shell structures fabricated by 3D printing, Transactions of the Korean Society of Mechanical Engineers, A, vol.41 No.6 pp.491~497, 2017
- Ultrasonic assisted thermoforming for rapid fabrication of a microspeaker diaphragm, MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS, vol.23 pp.1677~1686, 2017
- Effect of vibration transmission direction in ultrasonic thermoforming on the formability of micro-corrugations, INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, vol.18 No.5 pp.697~703, 2017
- A study on development of three-dimensional chocolate printer, Journal of the Korean Society for Precision Engineering, vol.34 No.4 pp.293~298, 2017
- An investigation of thread rolling characteristics of titanium micro-screws according to die design parameters, Journal of the Korean Society for Precision Engineering, vol.34 No.2 pp.89~94, 2017
- Investigation into thread rolling characteristics of subminiature screws according to thread shapes, Transactions of the Korean Society of Mechanical Engineers, A, vol.40 No.11 pp.971~978, 2016
- Variable wettability control of a polymer surface by selective ultrasonic imprinting and hydrophobic coating, COLLOID AND POLYMER SCIENCE, vol.294 No.9 pp.1413~1423, 2016
- Development of Annular Optics for the Inspection of Surface Defects on Screw Threads Using Ray Tracing Simulation, 한국정밀공학회지, vol.33 No.6 pp.491~497, 2016
- Development of Hybrid Surfaces with Tunable Wettability by Selective Surface Modifications, MATERIALS, vol.9 No.3 , 2016
- Investigation of Wetting Characteristics of Polymer Surfaces according to Electron Beam Irradiation, 한국정밀공학회지, vol.33 No.1 pp.45~51, 2016
- Design and Analysis of Ultrasonic Horn for Polymer Sheet Forming, International Journal of Precision Engineering and Manufacturing-Green Technology, vol.3 No.1 pp.49~54, 2016
- Finite element analysis of a customized eyeglass frame fabricated by 3D printing, Transactions of the Korean Society of Mechanical Engineers, A, vol.40 No.1 pp.65~71, 2016
- An investigation into the anti-releasing performance of a serrated bolt, Journal of Mechanical Science and Technology, vol.29 No.12 pp.5127~5132, 2015
- Development of Injection Mold for Subminiature Lenses Using Shell Runners Containing Multiple Holes, J. KSPE, vol.32 No.11 pp.961~968, 2015
- Design and Analysis of Shell Runners to Improve Cooling Efficiency in Injection Molding of Subminiature Lens, Trans. KSME(A), vol.39 No.10 pp.1021~1028, 2015
- Investigation of Localized Heating Characteristics in Selective Ultrasonic Imprinting, International Journal of Precision Engineering and Manufacturing, vol.16 No.9 pp.1999~2004, 2015
- Fully Coupled Numerical Analysis of High Frequency Induction Heating and Warm Sheet Metal Forming, STEEL RESEARCH INTERNATIONAL, vol.86 pp.877~885, 2015
- Hydrophilic Modification of Polycarbonate Surface by Electron Beam Irradiation, Polymer(Korea), vol.39 No.4 pp.559~565, 2015
- 조임 및 풀림 해석을 이용한 나사산 형상 설계, J. KSPE, vol.32 No.6 pp.523~528, 2015
- 초소형 나사 단조시 접힘결함 향상을 위한 유한요소해석, J. KSPE, vol.32 No.6 pp.509~515, 2015
- Coupled numerical analysis to investigate the heating mechanism of ultrasonic imprint lithography, ULTRASONICS, vol.60 pp.96~102, 2015
- Replication of Hybrid Micropatterns Using Selective Ultrasonic Imprinting, Trans. KSME (A), vol.39 No.1 pp.71~77, 2015
- 3D CAD와 3D프린팅을 연계한 공학설계교육 활용, 한국정밀공학회지, vol.31 No.12 pp.1085~1091, 2014
- Development of Composite Micro-Patterns on Polymer Film using Repetitive Ultrasonic Imprinting, INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY, vol.1 No.4 pp.341~345, 2014
- 초소형 나사의 나사산 각도변화에 따른 체결특성 평가, 한국정밀공학회지, vol.31 No.9 pp.839~846, 2014
- Selective ultrasonic imprinting for micropattern replication on predefined area, ULTRASONICS, vol.54 No.6 pp.1495~1503, 2014
- Prediction of Joining Torque for Bit Depth of Subminiature Bolt, 대한기계학회논문집 A, vol.38 No.8 pp.917~923, 2014
- 나사산 전면검사 비전시스템의 영상 균일도 향상을 위한 조명 광학계 설계 및 해석, 한국정밀공학회지, vol.31 No.3 pp.261~268, 2014
- Effect of Thickness Change in Corrugations on the Stiffness and Vibration Characteristics of a Thermoformed Diaphragm, 소성가공, vol.23 No.1 pp.10~15, 2014
- 초음파 임프린팅에서 금형온도에 따른 미세패턴의 전사특성 연구, Trans. KSME (A), vol.38 No.1 pp.51~57, 2014
- Numerical investigation on vibration characteristics of a micro-speaker diaphragm considering thermoforming effects, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, vol.27 No.10 pp.2923~2928, 2013
- Investigation on Vibration Characteristics of Micro Speaker Diaphragms for Various Shape Designs, 한국정밀공학회지, vol.30 No.8 pp.790~796, 2013
- Facile fabrication of superhydrophobic poly(methyl methacrylate) substrates using ultrasonic imprinting, JOURNAL OF MICROMECHANICS AND MICROENGINEERING, vol.23 , 2013
- Optimization of Ultrasonic Imprinting Using the Response Surface Method, 소성가공, vol.22 No.1 pp.36~41, 2013
- Investigation of Cooling Performance of Injection Molds Using Pulsed Mold Temperature Control, 대한기계학회논문집 B, vol.37 No.1 pp.35~41, 2013
- Determination of Thermal Contact Conductance of an Injection Mold Assembly for the Prediction of Mold Surface Temperature, 한국생산제조시스템학회지, vol.21 No.6 pp.1008~1012, 2012
- Direct patterning of micro-features on a polymer substrate using ultrasonic vibration, MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS, vol.18 No.12 pp.2053~2061, 2012
- Design Optimization of Ultrasonic Horn for Micro-Pattern Replication, INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, vol.13 No.12 pp.2195~2201, 2012
- Replication Characteristics of Micro-Patterns according to the Vibration Transmission Direction in the Ultrasonic Imprinting Process, 한국정밀공학회지, vol.29 No.11 pp.1256~1263, 2012
- Damage Prediction in the Multistep Forging Process of Subminiature Screws, INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, vol.13 No.9 pp.1619~1624, 2012
- Deformation Analysis of a Metal Mask for the Screen Printing of Micro Bumps, 한국생산제조시스템학회지, vol.21 No.3 pp.408~414, 2012
- Effect of Material Flow Direction on the Replication Characteristics of the Ultrasonic Patterning Process, 소성가공, vol.21 No.2 pp.119~125, 2012
- Improvement of Filling Characteristics of Micro-Bumps in the Stencil Printing Process, 한국생산제조시스템학회지, vol.21 No.1 pp.26~32, 2012
- Thermal-Fluid Coupled Analysis for Injection Molding Process by Considering Thermal Contact Resistance, 대한기계학회논문집 A, vol.35 No.12 pp.1627~1633, 2011
- Automated Mold Heating System Using High Frequency Induction with Feedback Temperature Control, INTERNATIONAL POLYMER PROCESSING, vol.26 No.5 pp.490~497, 2011
- 광선추적을 이용한 정밀나사 비전검사용 광학계의 결상특성 향상, 한국정밀공학회지, vol.28 No.9 pp.1094~1102, 2011
- Vibration Analysis for a Feeding Unit of Vision Inspection System of Precision Screws, 한국생산제조시스템학회지, vol.20 No.4 pp.446~451, 2011
- 초음파 패턴성형을 위한 공구혼의 설계 및 유한요소해석, 한국정밀공학회지, vol.28 No.3 pp.363~369, 2011
- Integrated Numerical Analysis to Evaluate Replication Characteristics of Micro Channels in a Locally Heated Mold by Selective Induction, INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, vol.12 No.1 pp.53~60, 2011
- Investigation into Heat Transfer Characteristics of an Injection Mold by Considering Thermal Contact Resistance, 소성가공, vol.20 No.1 pp.29~35, 2011
- Design of Cold Heading Process of a Screw for Storage Parts, 소성가공, vol.20 No.1 pp.48~53, 2011
- A Study on the Assessment of Program Outcomes Based on Capstone Design Course, 공학교육연구, vol.13 No.6 pp.143~151, 2010
- Study on Improvement of Dimensional Accuracy of a Precision Plastic Screw Under Various Injection-Molding Conditions, 대한기계학회논문집 A, vol.34 No.10 pp.1549~1554, 2010
- Three-Dimensional Finite Element Analysis of the Induction Heating Procedure of an Injection Mold, 소성가공, vol.19 No.3 pp.152~159, 2010
- Integrated Numerical Analysis of Induction-Heating-Aided Injection Molding Under Interactive Temperature Boundary Conditions, 대한기계학회논문집 A, vol.34 No.5 pp.575~582, 2010
- Localized mold heating with the aid of selective induction for injection molding of high aspect ratio micro-features, JOURNAL OF MICROMECHANICS AND MICROENGINEERING, vol.20 No.3 , 2010
- 국부 금형가열에 조건에 따른 사출성형품 웰드라인의 강도 고찰, 한국정밀공학회지, vol.27 No.1 pp.105~112, 2010
- Numerical analysis for verifying the performance of lens system in a scanning electron microscope, OPTIK, vol.121 pp.330~338, 2010
- Eliminating weldlines of an injection-molded part with the aid of high-frequency induction heating, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, vol.24 pp.149~152, 2010
Conference Papers
- 전은지, 오서현,박근, Investigation of conformal heating capability of a curved mold using CNT film heater, Proc. 9th Int. Conf. Asian Soc. Prec. Engng. Nanotechnol. (ASPEN 2022), 싱가포르, 2022
- 오서현, 전은지,박근, Mathematical filtering of TPMS structure for enhanced flow characteristics, Proc. 9th Int. Conf. Asian Soc. Prec. Engng. Nanotechnol. (ASPEN 2022), 싱가포르, 2022
- 오서현, 지민정, 박근, 미세격자형 비인두 검체봉 자동설계 및 3D 프린팅 조형 데이터 생성 알고리즘 개발, 2022년도 대한기계학회 학술대회 논문집, 제주, 2022
- 서보민, 문건호, 김동재, 김재중, 윤석민, 오서현, 김정우, 박근, 박창용, TPMS 구조를 활용한 자동차용 열교환기 내 압력강하 특성에 대한 실험적 연구, 2022년도 대한기계학회 학술대회 논문집, 제주, 2022
- 최홍갑, 박근, 음의 포아송비를 갖는 Auxetic 메타구조물 설계, 한국정밀공학회 2022년도 추계학술대회 논문집, 대구, 2022
- 김정우, 안찬희, 서보민, 문건호, 오서현, 박창용, 박근, 기능성 TPMS 다공성 구조체 기반 열교환기에 관한 연구, 한국정밀공학회 2022년도 추계학술대회 논문집, 대구, 2022
- 박근, 오서현, 이준원, 양희진, 박창용, 김정우, 고집적 TPMS 열교환기의 적층제조 기반 설계기술, 한국정밀공학회 2022년도 추계학술대회 논문집, 대구, 2022
- 오서현, 이준원, 유정희, 박근, Design and additive manufacturing of microcellular structures for development of thermal metamaterials, Proc. Int. Conf. Des. 3D Printing, 싱가포르, 2022
- 오서현, 박근, 적외선 가열을 통한 적층제조 시편의 국부적 형상변환, 대한기계학회 생산 및 설계공학부문 춘계학술대회 논문집, 서울, 2022
- 최홍갑, 박근, 적층제조 Auxetic 메타물질의 기계적 변형거동 연구, 대한기계학회 생산 및 설계공학부문 춘계학술대회 논문집, 서울, 2022
- 전은지, 이준원, 박근, TPMS 열교환기 유동길이에 따른 열교환 특성 연구, 한국정밀공학회 2022년도 춘계학술대회 논문집, 제주, 2022
- 박근, DfAM 기반 열적 메타물질 개발 및 금형 냉각 적용사례, 한국정밀공학회 2022년도 춘계학술대회 논문집, 제주, 2022
- 이준원, 오서현, 유정희, 박근, Conformal mold heating and cooling using a CNT film heater and 3D-printed cellular structures, 37th Annu. Meet. Polym. Proc. Soc (PPS-37), Fukuoka (일본), 2022
- 김태영, 박근, 위상최적화를 이용한 스피드 스케이트 클랩바 경량설계, 한국생산제조학회 2021년도 추계학술대회 논문집, 제주칼호텔, 2021
- 오서현, 안승덕, 박근, CNT web 기반 곡면형 사출금형 균일 가열 특성 연구, 한국생산제조학회 2021년도 추계학술대회 논문집, 제주칼호텔, 2021
- 지민정, 이창렬, 이준원, 김정우, 박근, 스쿠버 다이빙용 호흡기 내부 형상에 따른 유동 특성 고찰, 한국생산제조학회 2021년도 추계학술대회 논문집, 제주KAL호텔, 2021
- 서보민, 김성준, 김보경, 오승록, 박근, 박창용, 냉각 유로 형상에 따른 가열부의 온도 및 열변형에 관한 해석적 연구, 한국생산제조학회 2021년도 추계학술대회 논문집, 제주칼호텔, 2021
- 이승원, 이준원, 박근, 다중재료 3D프린팅 기술을 이용한 스킨스쿠버용 Diaphragm 개발, 한국정밀공학회 2021년도 추계학술대회 논문집, 부산 Bexco, 2021
- 하종욱, 오서현, 박근, TPMS 기반 냉각구조체를 이용한 사출금형의 냉각기술 연구, 한국정밀공학회 2021년도 추계학술대회 논문집, 부산 Bexco, 2021
- 이준원, 박근, 삼차원 주기적 셀구조 생성을 위한 인공신경망 연구, 한국정밀공학회 2021년도 추계학술대회 논문집, 부산 Bexco, 2021
- 오서현, 하종욱, 박근, 분리형 형상적응 냉각회로를 적용한 사출 금형 냉각 특성 연구, 한국생산제조학회 2021년도 춘계학술대회논문집, 강릉 세인트존스 호텔, 2021
- 박근, DfAM 설계기술을 적용한 기능성 제품 개발 사례, 대한기계학회 생산 및 설계부문 춘계학술대회 논문집, 부산라발스호텔, 2021
- 이준원, 하종욱, 오서현, 박근, 미세격자형 냉각구조체를 적용한 사출금형의 냉각효율 향상, 대한기계학회 생산 및 설계부문 춘계학술대회 논문집, 부산라발스호텔, 2021
- 박근,유정희,이준원,오승록, CNT 필름 히터와 금속단열체를 사용한 사출금형 가열 기술, 한국정밀공학회 2021년도 춘계학술대회논문집, 제주라마다호텔, 2021
- 오서현, 박근, 자동설계를 적용한 격자구조 비인두 검체봉 개발, 한국정밀공학회 2021년도 춘계학술대회논문집, 제주라마다호텔, 2021
- 차으뜸, 김태영, 박근, DfAM을 이용한 진공 피커의 최적설계, 한국정밀공학회 2021년도 춘계학술대회논문집, 제주라마다호텔, 2021
- 김태영, 박근, DLP 방식 적층 제조에서의 후경화에 따른 굽힘 특성 고찰, 한국정밀공학회 2021년도 춘계학술대회논문집, 제주라마다호텔, 2021
- 하종욱, 오서현, 이준원, 박근, 격자구조 냉각 회로를 이용한 사출금형의 균일 냉각기술 연구, 한국정밀공학회 2021년도 춘계학술대회논문집, 제주라마다호텔, 2021
- 이준원, 박근, 전기-열 연성해석을 통한 중공형 CNT 필름히터 형상 최적화 연구, 대한기계학회 2020년도 학술대회 논문집, 온라인, 2020
- 유정희, 박근, Investigation of thermal insulation characteristic of metal lattice structure, Proc. Int. Symp. Precis. Eng. Sustain. Manuf., Seoul, 2020
- 박근, 박정환, Design and additive manufacturing of functionally graded lattice using DLP printing, Proc. Int. Symp. Precis. Eng. Sustain. Manuf., Seoul, 2020
- 박근, 구본아, 홍채희, 4D printing using anisotropy of extrusion type additive manufacturing, Proc. IEEE Int. Conf. on Nanomaterials: Applications & Properties (NAP-2020), Sumy, Ukraine, 2020
- 이지호, 김태수, 박창용, 박근, 탄소나노튜브 면상발열체의 열전달 특성 전산모사, 한국정밀공학회 2020년도 통합학술대회논문집, 온라인, 2020
- 이준원, 박근, 적층제조를 위한 요소망 최소표면 등각 구조물 자동설계 기법 연구, 한국생산제조학회 2020년도 춘계학술대회논문집, 휘닉스 평창, 2020
- 박정환, 박근, 적층 제조로 제작된 강성제어를 위한 경사기능 격자구조에 관한 연구, 대한기계학회 2019년도 학술대회 논문집, 제주컨벤션센터, 2019
- 유정희, 서형임, 박근, 체심입방 미세격자구조의 자동 설계방법, 대한기계학회 2019년도 학술대회 논문집, 제주라마다호텔, 2019
- 구본아, 박근, 적층 이방성을 활용한 4D프린팅 유한요소해석, 대한기계학회 2019년도 학술대회 논문집, 제주컨벤션센터, 2019
- 오승아, 박근, 분리형 가열구조를 적용한 사출금형의 급속가열기술 연구, 한국정밀공학회 2019년도 추계학술대회논문집, 창원컨벤션센터, 2019
- 김재은, 박정환, 박근, 위상최적화 적용 경량 격자구조 설계, 한국정밀공학회 2019년도 추계학술대회논문집, 창원컨벤션센터, 2019
- 김창호, 하용구, 오승아, 박근, 등각 냉각회로를 적용한 곡면형 금형의 사출성형 해석, 한국정밀공학회 2019년도 추계학술대회논문집, 창원컨벤션센터, 2019
- 장남훈, 박근, 압출적층형 금속 프린팅 기술을 활용한 3차원 성형회로 부품 제조기술 연구, 한국정밀공학회 2019년도 추계학술대회논문집, 창원컨벤션센터, 2019
- 박근, 임영은, 박정환, Automatic design of 3D lightweight structures based on finite element mesh, Proc. 10th Int. Conf. Appl. Human Factor Ergonomics (AHFE 2019), Washington DC, 2019
- 박정환, 박근, Deformation behavior of lattice structures fabricated by DLP 3D printing, Proc. Int. Symp. Precis. Eng. Sustain. Manuf. (PRESM 2019), Da Nang, 2019
- 유정희, 김재은, 지숙, 박근, Design and additive manufacturing of wearable toothbrush, Proc. Int. Symp. Precis. Eng. Sustain. Manuf. (PRESM 2019), Da Nang, 2019
- 이현중, 장남훈, 정진우, 박근, Increasing flow length in multi-component hybrid molding, Proc. 34th Annu. Meet. Polym. Proc. Soc, Taipei, 2019
- 김재은, 유정희, 지숙, 박근, 3차원 스캔을 활용한 개인 맞춤형 웨어러블 칫솔의 설계, 한국정밀공학회 2019년도 춘계학술대회 논문집, 제주라마다호텔, 2019
- 김규원, 박영일, 박근, 위상최적화를 적용한 자동차 부품 경량 설계, 한국정밀공학회 2019년도 춘계학술대회 논문집, 제주라마다호텔, 2019
- 오승아, 박근, 국부적 가열을 적용한 사출금형의 열특성 고찰, 한국정밀공학회 2019년도 춘계학술대회 논문집, 제주라마다호텔, 2019
- 이지은, 손용, 박근, 박석희, 기계적 물성 향상을 위한 IR램프 장착 3D프린터 개발, 한국생산제조학회 2019년도 춘계학술대회 논문집, 알펜시아리조트, 2019
- 오승아, 박근, Development of localized heating module for injection mold, Proceedings of The 8th International Conference on Manufacturing, Kakoshima, 2019
- 장남훈, 유정희, 박근, Development of MID Rapid Processing Technology using FDM 3D Printing, Proceedings of The 8th International Conference on Manufacturing, Kagoshima, 2019
- 박근, 이현중, High-frequency induction heating for polymer/metal hybrid molding, Proceedings of The 8th International Conference on Manufacturing, Kagoshima, 2019
- 구본아, 홍채희, 박근, FDM 방식을 이용한 4D 프린팅에서의 열변형 요인 분석, 대한기계학회 2018년도 학술대회 논문집, 강원랜드 컨벤션센터, 2018
- 장남훈, 유정희, 박근, FDM 3차원 프린팅 기술을 활용한 MID 급속 조형 장비 개발, 대한기계학회 2018년도 학술대회 논문집, 강원랜드 컨벤션센터, 2018
- 박정환, 박근, 3D프린팅으로 제작된 우레탄 소재 격자구조의 기계적 물성 평가, 대한기계학회 2018년도 학술대회 논문집, 강원랜드 컨벤션센터, 2018
- 정진우, 이현중, 박근, 플라스틱/금속 복합성형을 위한 임베디드 가열구조에 관한 연구, 한국정밀공학회 추계학술대회 논문집, 새만금컨벤션센터, 2018
- 이현중, 박근, 초음파 진동을 이용한 마이크로 성형기술 개발, 한국정밀공학회 추계학술대회 논문집, 새만금컨벤션센터, 2018
- 오승아, 장남훈, 박근, 곡면 형상의 사출성형시 유동거리 향상을 위한 금형가열 실험 및 해석, 한국정밀공학회 추계학술대회 논문집, 새만금컨벤션센터, 2018
- 150.이주환, 임원준, 임규선, 최원배, 박근, 3차원 스캐닝과 연계한 초콜릿 곡면 프린팅 기술 개발, 한국생산제조시스템학회 추계학술대회 논문집, 밀레니엄 서울 힐튼호텔, 2018
- 구본아, 김재은, 하연수, 박근, Development of customized biathlon eyeshades combining 3D Scanning and 3D printing, Proc. 7th Int. Conf. Manuf. Technol. Engnrs, Seoul, 2018
- 박근, 이현중, A. Gomer, Ultrasonic thermoforming of polymer speaker diaphragms, Proc. Korea-Japan Polymer Processing Joint Symposium 2018, Jeju, Korea, 2018
- 장남훈, 송성은, 박근, Effect of printing conditions on material anisotropy in DLP 3D printing, Proc. Int. Symp. Precis. Eng. Sustain. Manuf., Sapporo, Japan, 2018
- 박정환, 구본아, Topology optimization and 3D printing of a customized rifle support, Proc. Int. Symp. Precis. Eng. Sustain. Manuf., Sapporo, Japan, 2018
- 홍채희, 구본아, 박근, FDM 3D프린팅 제품 열변형에서의 이방성 고찰, 대한기계학회 생산및설계부문 춘계학술대회 논문집, 양재엘타워, 2018
- 박근, 이현중, 정진우, 장남훈, 금속-플라스틱 복합 성형을 위한 금형 가열구조 연구, 대한기계학회 생산및설계부문 춘계학술대회 논문집, 양재엘타워, 2018
- 오승아, 박근, 핫 러너를 적용한 초송형 렌즈 사출성형 특성 고찰, 대한기계학회 생산및설계부문 춘계학술대회 논문집, 양재엘타워, 2018
- 구본아, 홍채희, 박근, FDM 3D프린터를 이용한 4D 프린팅 연구, 대한기계학회 IT융합부문 춘계학술대회 논문집, 서울과학기술대, 2018
- 장남훈, 송성은, 박근, 광조형 3차원 프린팅 조형 조건에 따른 재료 이방성에 관한 연구, 한국정밀공학회 춘계학술대회 논문집, 제주라마다호텔, 2018
- 박정환, 박근, 3D프린팅으로 제작된 경량구조 행거의 유한요소해석, 한국정밀공학회 춘계학술대회 논문집, 제주라마다호텔, 2018
- 박근, 신동주, 이현중, Microfeature fabrication on curved surface using infrared heating and ultrasonic vibration, Proc. 6th Annu. Conf. AnalytiX, Miami, 2018
- 임영은, 박근, 유한요소망을 이용한 3차원 경량구조물 자동설계 및 해석, 한국정밀공학회 추계학술대회 논문집, 곤지암리조트, 2017
- 장남훈, 박정환, 류기웅, 박근, 초콜릿을 이용한 3차원 프린팅 기술에 관한 연구, 한국정밀공학회 추계학술대회 논문집, 곤지암리조트, 2017
- 이현중, 신동주, 박근, 적외선 보조가열을 이용한 스피커 진동판의 초음파 성형기술, 한국정밀공학회 추계학술대회 논문집, 곤지암리조트, 2017
- 신다연, 이현중, 임태현, 홍영규, 박근, 열-구조 연계해석을 이용한 FDM방식 3차원 프린터의 고온 압출부 설계에 관한 연구, 한국정밀공학회 추계학술대회 논문집, 곤지암리조트, 2017
- 이현중, 장남훈, 박근, 고주파 유도가열 조건에 따른 금형의 온도변화 분석, 한국생산제조시스템학회 추계학술대회 논문집, 제주칼호텔, 2017
- 박근, 배호진, 이현중, Effect of vibration transmission direction in ultrasonic thermoforming, Proc. 7th Int. Conf. Asian Soc. Prec. Engng. Nanotechnol., Seoul, Korea, 2017
- 이현중, 박근, Development of the micro-molding technology using ultrasonic vibration energy, Proc. 7th Int. Conf. Asian Soc. Prec. Engng. Nanotechnol., Seoul, Korea, 2017
- 박근, 임영은, Design and fabrication of a porous cast using additive manufacturing, Proc. Int. Conf. 3D Printing Technol. Innovation, Frankfurt, Germany, 2017
- 임영은, 박근, Automatic design of porous shell structure for additive manufacturing, Proc. Int. Symp. Green Manuf. Applications, Gyeongju, Korea, 2017
- 박근, 김나현, 최혜진, 임영은, Design and analysis of personalized cast with porous lightweight structure, Proc. Int. Symp. Green Manuf. Applications, Gyeongju, Korea, 2017
- 박근, 김나현, 최혜진, 임영은, 다공성 맞춤형 Cast의 설계 및 해석, 한국정밀공학회 춘계학술대회 논문집, 제주라마다호텔, 2017
- 이현중, 신다연, 임태현, 홍영규, 박근, 재료압출형 3D프린터 압출부의 열특성 해석, 한국정밀공학회 춘계학술대회 논문집, 제주라마다호텔, 2017
- 배호진, 이현중, 김성걸, 박근, Numerical analysis of vibration characteristics of micro-speaker module according to formability of micro-corrugations, Proc. 7th Int. Conf. Manuf. Machine Design Tribology, Jeju, Korea, 2017
- 이현중, 배호진, 박근, Ultrasonic thermoforming of a speaker diaphragm with the aid of infrared heating, Proc. Int. Conf. Manuf. Machine Design Tribology, Jeju, Korea, 2017
- K. Park, J. E. Lee, J. B. Kim and S. W. Ra, Design and analysis of metal forming processes for micro-screw parts, Proc. Asian Adv. Mater. Congress 2017, Diamond Princess Cruises, Singapore, 2017
- 임영은, 박근, 3차원 프린팅으로 제작된 다공성 경량 구조물의 변형 특성 연구, 대한기계학회 2016년도 학술대회 논문집, 강원랜드컨벤션센터, 2016
- 김홍철, 김다영, 이지은, 박근, 3차원 프린팅 제품의 표면정밀도 향상기술 연구, 한국생산제조시스템학회 추계학술대회 논문집, 제주KAL호텔, 2016
- 김나현, 최혜진, 임영은, 박근, 개인맞춤형 깁스 제작을 위한 3차원 설계 및 해석, 한국생산제조시스템학회 추계학술대회 논문집, 제주KAL호텔, 2016
- 이현중, 임영은, 초음파 성형시 진동판의 균일도 향상을 위한 혼 설계, 한국정밀공학회 추계학술대회 논문집, 여수디오션리조트, 2016
- 박근, 김홍철, 민경빈, 나승우, 코팅조건에 따른 풀림방지 나사의 체결특성 고찰, 한국정밀공학회 추계학술대회 논문집, 여수디오션리조트, 2016
- 이현중, 박근, 미세패턴과 전자빔을 혼용한 친-소수성 복합 표면 개발, 한국정밀공학회 추계학술대회 논문집, 여수디오션리조트, 2016
- 박근, 이현중, 정우신, Development of functional surfaces using ultrasonic vibration energy, Proc. Japan-Korea Plastics Processing Joint Seminar 2016, 후쿠오카, 2016
- 임영은, 이지원, 박근, 나승우, Development of omnidirectional annular optics for inspection of screw threads, Proc. Int. Symp. Green Manuf. Applications (ISGMA 2016), 발리, 2016
- 배호진, 이현중, 박근, Ultrasonic forming of micro-speaker diaphragm without thermal energy, Proc. Int. Symp. Green Manuf. Applications (ISGMA 2016), 발리, 2016
- 임영은, 이지원, 박근, 나승우, 나사산 외관결함 검사용 환형 광학계 설계 및 해석, 대한기계학회 생산 및 설계부문 춘계학술대회 논문집, 여수 히든베이호텔, 2016
- 이현중, 박근, 초소수성 미세패턴의 손상여부에 따른 젖음성 분석, 대한기계학회 생산 및 설계부문 춘계학술대회 논문집, 여수 히든베이호텔, 2016
- 이지은, 박근, 김종봉, 나승우, 초소형 타이타늄 나사 전조공정 해석, 한국정밀공학회 춘계학술대회 논문집, 제주라마다호텔, 2016
- 박근, 이현중, 정우신, Selective ultrasonic imprinting for development of functional micropatterns, Proc. 11th Int. Conf. Micromanufact. (ICOMM2016), Hilton Orange County/Airport Hotel and Conference Center, 2016
- 이현중, 박근, 선택적 초음파 임프린팅을 통한 초소수성 미세패턴의 특성 고찰, 대한기계학회 창립 70주년 기념 학술대회 논문집, 제주국제컨벤션센터, 2015
- 배호진, 이현중, 박근, 초음파 진동을 이용한 마이크로 스피커 진동판 열성형, 대한기계학회 창립 70주년 기념 학술대회 논문집, 제주국제컨벤션센터, 2015
- 송찬희, 이지은, 김종봉, 박근, 나승우, 초소형 TORX 나사 단조공정의 유한요소해석, 한국생산제조시스템학회 추계학술대회 논문집, 제주KAL호텔, 2015
- 이지원, 윤승탁, 박근, 나승우, 환형 비전검사 광학계의 설계 및 해석, 한국생산제조시스템학회 추계학술대회 논문집, 제주KAL호텔, 2015
- 임영은, 이지원, 박근, 나승우, 나사산 외관불량 검사를 위한 비전검사 광학계의 최적설계, 한국생산제조시스템학회 추계학술대회 논문집, 제주KAL호텔, 2015
- 이현중, 정우신, 박근, Applications of ultrasonic imprinting in developing versatile micropatterns, Proc. ISGMA 2015, Qingdao, 2015
- 배호진, 박근, Design and analysis of ultrasonic horn for polymer sheet forming, Proc. ISGMA 2015, Qingdao, 2015
- 박근, 박종한, Investigation of heating characteristics in forward and backward ultrasonic imprinting, Proc. PPS-31, Jeju, 2015
- 박근, 이지원, 윤승탁, 나승우, 환형 비전검사 광학계의 광선추적 시뮬레이션, 한국정밀공학회 춘계학술대회 논문집, 제주라마다호텔, 2015
- 윤승탁, 박근, 러너크기에 따른 초소형 렌즈의 성형특성 고찰, 한국정밀공학회 춘계학술대회 논문집, 제주라마다호텔, 2015
- 나승우, 박근, 초소형 체결부품의 개발동향, 한국정밀공학회 춘계학술대회 논문집, 제주라마다호텔, 2015
- 이지은, 김종봉, 박근, 나승우, 유한요소해석을 사용한 나사산 전조공정의 성형성 연구, 한국정밀공학회 춘계학술대회 논문집, 제주라마다호텔, 2015
- 박근, 나승우, Optimal design of vision illumination optics for inspection of screw threads, Proc. ICMDT 2015, 오키나와, 2015
- 이현중, 정우신, 박근, 선택적 초음파 임프린팅을 사용한 기능성 미세패턴 제작, 대한기계학회 추계학술대회 논문집, 김대중컨벤션센터(광주), 2014
- 이지은, 김종봉, 박근, 나승우, 초소형 나사 단조공정의 유한요소해석, 한국정밀공학회 추계학술대회 논문집, 창원컨벤션센터, 2014
- 정진한, 이현규, 나승우, 박근, 김종봉, 볼트와 너트 재료가 다른 경우 최대 조임 및 풀림 토크 예측, 한국정밀공학회 추계학술대회 논문집, 창원컨벤션센터, 2014
- 이현중, 박근, 김병남, 전자빔을 사용한 고분자 표면의 접촉각 변화 분석, 한국정밀공학회 추계학술대회 논문집, 창원컨벤션센터, 2014
- 임영은, 이지은, 박근, 광조형 3차원 프린팅시 적층두께 변화에 따른 물성변화 연구, 한국생산제조시스템학회 추계학술대회 논문집, 제주KAL호텔, 2014
- 박종한, 이기연, 박근, Numerical investigation of heating mechanism in ultrasonic imprinting, Proc. ISGMA2014, 부산파라다이스호텔, 2014
- 박근, 이현중, 정우신, Selective micropattern replications using ultrasonic imprint lithography, Proc. ISGMA2014, 부산파라다이스호텔, 2014
- 조영학, 김보현, 박근, 초음파 임프린팅을 사용한 초발수성 표면 제작, 한국정밀공학회 춘계학술대회 논문집, 라마다프라자제주호텔, 2014
- 박근, 김영석, 안동규, 양동열, 3D 프린팅과 2차공정을 연계한 쾌속 제품개발 사례, 한국정밀공학회 춘계학술대회 논문집, 라마다프라자제주호텔, 2014
- 이현중, 정우신, 박근, 선택적 초음파 임프린팅을 이용한 복합 미세패턴 복제기술, 한국정밀공학회 춘계학술대회 논문집, 라마다프라자제주호텔, 2014
- 박종한, 김종봉, 박근, 고주파 유도가열을 적용한 금속 박판의 성형성 향상, 한국정밀공학회 춘계학술대회 논문집, 라마다프라자제주호텔, 2014
- 임영은, 이현중, 박근, 3차원 프린팅시 조형조건에 따른 물성변화 연구, 한국정밀공학회 춘계학술대회 논문집, 라마다프라자제주호텔, 2014
- 박근, 이현중, 정우신, Applications of ultrasonic imprinting lithography to micropattern replication on thermoplastic polymer films, Proc. ISAPM 2014, Kuala Lumpur, Malaysia, 2014
- 이현중, 정우신, 박근, 초음파 임프린팅을 사용한 미세패턴 반복성형 기술, 한국생산제조시스템학회 춘계학술대회 논문집, 창원컨벤션센터, 2014
- 이지은, 민경빈, 김종봉, 박근, 나승우, 전조금형 간격 변화에 따른 초소형 나사산의 성형성비교, 대한기계학회 생산 및 설계부문 춘계학술대회 논문집, 라마다프라다제주호텔, 2014
- 박근, 이현중, 기계공학도 대상 CAD 교육에서의 3차원 프린터 활용, 한국 CAD/CAM 학회 학술발표회 논문집, 피닉스파크, 2014
- 박근, 박종한, Formability improvement in multi-stage deep drawing of AA5182 with the aid of high frequency induction heating, Proc. NUMISHEET 2014, Deakin University, 호주(멜버른), 2014
- 민경빈,박근,나승우, Evaluation of Clamping Force for Subminiature Screws using Finite Element Analysis, Proc. 5th Int. Conf. Asian Soc. Prec. Engng. Nanotechnol, 태백, 2013
- 이현중, 정우신, 박근, 선택적 초음파 임프린팅에서 미세패턴의 전사특성 고찰, 한국정밀공학회 추계학술대회 논문집, 부산, 2013
- 임영은, 이창훈, 박근, 나승우, 볼트부품 비전 검사시 영상의 균일도 향상을 위한 연구, 한국정밀공학회 추계학술대회 논문집, 부산, 2013
- 이지은, 박근, 나승우, 초소형 나사 전조성형 공정의 유한요소해석, 한국정밀공학회 추계학술대회 논문집, 부산, 2013
- 정우신, 박근, 마스크 필름을 이용한 선택적 초음파 임프린팅 공정 개발, 한국생산제조시스템학회 추계학술대회 논문집, 제주, 2013
- 박종한, 박근, 전자부품 다단성형 공정에서 금형온도에 따른 성형성 고찰, 한국생산제조시스템학회 추계학술대회 논문집, 제주, 2013
- 박근, 이현중, Applications of 3D printing in engineering design education, Proc. Global 3D Tech Forum, Seoul, 2013
- 김경민, 박근, Vibration characteristics of micro-speaker diaphragm considering thermoforming effect, Proc. 5th Int. Conf. Manuf. Mach. Design Tribology, Busan, 2013
- 정우신, 박근, Optimization of ultrasonic imprinting process for micropattern replication in large area, Proc. 5th Int. Conf. Manuf. Mach. Design Tribology, Busan, 2013
- 이기연, 박근, 구조-열 연계해석을 사용한 초음파 임프린팅 공정의 전산모사, 한국소성가공학회 춘계학술대회 논문집, 제주, 2013
- 민경빈, 박종한, 박근, 초음파 임프린팅에서 금형온도에 따른 미세패턴 전사성 연구, 한국생산제조시스템학회 춘계학술대회 논문집, 부산, 2013
- 윤승탁, 이현중, 이명상, 이영은, 박근, 나선형 에스컬레이터의 3차원 설계 및 시뮬레이션, 한국생산제조시스템학회 춘계학술대회 논문집, 부산, 2013
- 이현중, 윤승탁, 정우신, 박근, LCD용 BLU 프레임 사출성형시 형상설계에 따른 수축률 분석, 한국생산제조시스템학회 춘계학술대회 논문집, 부산, 2013
- 박근, 이기연, Numerical analysis for ultrasonic imprint lithography, Proc. POLYCHAR21, Kwangju, 2013
- 박근, 이기연, 정우신, 서영수, 초음파 임프린팅을 이용한 열가소성 고분자수지 미세패턴 복제기술, 한국소성가공학회 미세가공심포지움, 대명비발디파크, 2012
- 박근, 민병욱, 이혜진, 김종봉, 롤투롤 공정을 이용한 미세금속패턴 성형시 주름발생 방지를 위한 롤금형 설계, 한국정밀공학회 추계학술대회 논문집, 광주과학기술원, 2012
- 김경민, 황명우, 문세환, 박근, 마이크로 스피커 진동판 두께변화에 따른 진동특성 분석, 한국정밀공학회 추계학술대회 논문집, 광주과학기술원, 2012
- 문세환, 황명우, 김경민, 박근, 열성형 공정의 수치해석을 통한 마이크로 스피커 진동판의 두께분포예측, 한국정밀공학회 추계학술대회 논문집, 광주과학기술원, 2012
- 이기연, 김경민, 박근, Determination of thermal contact conductance of an injection mold assembly for the prediction of mold surface temperature, Proc. International Conference of Manufacturing Technology Engineers, Seoul, 2012
- 이기연, 이혜진, 박근, Effect of mask design on deformation characteristics of micro-holes, Proc. Int. Conf. of Manufacturing Technology Engineers, Se근oul, 2012
- 정우신, 박근, 반응표면법을 이용한 초음파 임프린팅 공정 최적화, 한국소성가공학회 금형가공심포지움, 서울 메이필드호텔, 2012
- 박근, 민병욱, 김종호, 이혜진, 차성훈, 김종봉, Optimal design of the roll shape for the roll-to-roll forming process of metal micro-patterns, Steel Research International, Krakow, 2012
- 박근, 이기연, 서영수, Ultrasonic imprinting: A cold-state embossing for micro-pattern replication, The Japan-Korea Plastics Processing Joint Seminar, Sapporo, 2012
- 백순보, 박근, 이철원, 상악동 골에 이식된 임플란트가 주위응력에 미치는 영향에 대한 3차원 유한요소해석, 대한기계학회 생산 및 설계공학부문 춘계학술대회 논문집, 대전컨벤션센터, 2012
- 박근, 손동휘, 가변 냉각기법을 적용한 사출금형의 냉각성능 고찰, 대한기계학회 생산 및 설계공학부문 춘계학술대회 논문집, 대전컨벤션센터, 2012
- 김경민, 박근, 마이크로 스피커 진동판 형상에 따른 진동 특성 분석, 대한기계학회 생산 및 설계공학부문 춘계학술대회 논문집, 대전컨벤션센터, 2012
- 정우신, 이기연, 박근, 초음파 공구혼 형상변화에 따른 미세패턴 전사특성 고찰, 한국금형공학회 하계학술대회논문집, 공주대학교 천안캠퍼스, 2012
- 백순보, 박근, 사출성형조건에 따른 LCD용 도광판의 광학적 특성 분석, 한국정밀공학회 춘계학술대회 논문집, 제주, 2012
- 서영수, 이기연, 박근, 초음파 패턴성형시 패턴 방향에 따른 전사특성 고찰, 한국생산제조시스템학회 춘계학술대회 논문집, 제주칼호텔, 2012
- 이기연, 박근, 김종봉, 이혜진, 스크린 프린팅용 미세 범프 형성용 금속 마스크 변형특성 해석, 한국생산제조시스템학회 춘계학술대회 논문집, 제주칼호텔, 2012
- 박근, 정우신, 나종만, 초음파 패턴성형시 균일도 향상을 위한 공구혼 최적설계, 한국생산제조시스템학회 춘계학술대회 논문집, 제주칼호텔호텔, 2012
- 박근,서영수,정우신, Effect of sonotrode design on the performance of the ultrasonic patterning process, IOP Conf. Series: Materials Science and Engineering, Madrid, 2012
- 백순보, 이기연, Development of vision system for automatic inspection of precision screws, Proc. 4th Int. Conf. Asian Soc. Prec. Engng. Nanotechnol., Langham Place Hong Kong Hotel, 2011
- 김종봉, 박근, 서원상, Damage prediction in the multistep forging process of precision screwsc inspection of precision screws, Proc. 4th Int. Conf. Asian Soc. Prec. Engng. Nanotechnol., Langham Place Hong Kong Hotel, 2011
- 나종만, 정우신, 서영, 초음파 직접성형시 패턴의 전사성 향상을 위한 연구, Part I: 수치해석, 한국정밀공학회 추계학술대회 논문집, 경주, 2011
- 정우신, 나종만, 서영, 초음파 직접성형시 패턴의 전사성 향상을 위한 연구, Part II: 실험적 검증, 한국정밀공학회 추계학술대회 논문집, 경주, 2011
- 서원상, 민병욱 이혜진, 김종, 스퀴지 각도에 따른 프린팅 압력 및 스텐실 프린팅 성능 분석, 한국생산제조시스템학회 추계학술대회 논문집, 대전, 2011
- 서영수, 초음파 패턴성형시 금형형상에 따른 전사특성 고찰, 한국소성가공학회 제 8회 금형가공심포지엄 논문집, 서울, 2011
- 서영, Design and analysis of an ultrasonic tool horn for micro-pattern forming, Proc. 4th Int. Conf. Adv. Sci. Technol. Mater. Manuf. Measurement, 서울TP, 2011
- 손동휘, High-frequency induction heating for injection molding: Two challenges, Proc. Int. Conf. Adv. Sci. Technol. Mater. Manuf. Measurement., 서울TP, 2011
- 이기연, 김경민, Effect of thermal contact conductance on the heat transfer characteristics of an injection mold assembly, Proc. 14th Int. Conf. Adv. Mater. Process. Technol., Hilton Convention Center (이스탄불, 터키), 2011
- 박근, 서영수, Micro-pattern forming on a polymer substrate using ultrasonic energy, Proc. Int. Conf. Adv. Mater. Process. Technol., Hilton Convention Center (이스탄불, 터키), 2011
- 백순보, 나승, 광선추적기법을 사용한 정밀나사 비전검사 광학계의 최적설계, 대한기계학회 생산 및 설계공학부문 춘계학술대회 논문집, 제주, 2011
- 이기연, 김경, 실험계획법과 유한요소법을 연계한 사출금형 열접촉 전도도의 결정, 대한기계학회 생산 및 설계공학부문 춘계학술대회 논문집, 제주, 2011
- 손동휘, 김경, 사출금형의 열접촉 저항을 고려한 성형과정의 열-유동 연계해석, 대한기계학회 생산 및 설계공학부문 춘계학술대회 논문집, 제주, 2011
- 서원상,민병욱,김종봉,이혜, 스텐실 프린팅에서 스퀴지 속도와 각도가 프린팅 성능에 미치는 영향 분석, 한국생산제조시스템학회 춘계학술대회 논문집, 제주, 2011
- 서예린, 나승, 정밀나사 비전검사시스템용 공급장치의 진동특성 해석, 한국생산제조시스템학회 춘계학술대회 논문집, 제주, 2011
- 서영수, 정우신, 나종만, 박, 초음파 진동을 이용한 마이크로 패턴의 성형특성 고찰, 한국생산제조시스템학회 춘계학술대회 논문집, 제주, 2011
- 민병욱, 서원상, 김종봉, 송정, R2R 공정을 이용한 마이크로 Cavity 성형에서 Roll의 변형에 대한 연구, 한국생산제조시스템학회 춘계학술대회 논문집, 제주, 2011
- 손동휘, 서영, 급속 금형온도 제어기술을 이용한 사출성형품 웰드라인 개선, 한국금형공학회 동계학술대회 논문집, 2010
- 박서리, 김현, 심동철, 김도, 류민, PC 수지 사출성형품의 표면상태에 따른 내 스크래치성, 한국소성가공학회 제 7회 금형가공심포지엄 논문집, 2010
- 백순보,이기연, 정밀나사 비전검사기 광학계의 결상특성 해석, 한국정밀공학회 추계학술대회 논문집, 2010
- 서영수, 초음파 패턴성형을 위한 공구혼의 설계 및 유한요소해석, 한국정밀공학회 춘계학술대회 논문집, 2010
- 서영수, 손동휘, Improvement of surface appearance of an injection-molded part with the aid of rapid mold heating with temperature control, Proc. Int. Conf. Adv. Mater. Process. Technol., 파리공과대학, 2010
- 서영수, 손동휘, 김경민, 이광우, 투명 사출성형품 품질향상을 위한 금형온도 제어기술, 한국정밀공학회 춘계학술대회 논문집, 2010
- 손동휘, 엄혜주, Applications of high-frequency induction heating to high-quality injection molding, Proc. SPE ANTEC 2010, Orlando, FL, 2010
- 서영수, 손동휘, 이광, 피드백제어 급속 금형가열 시스템을 적용한 사출성형품 품질향상, 대한기계학회 생산 및 설계공학부문 춘계학술대회 논문집, 제주라마다호텔, 2010
- 백순보, 김경민, 염충호, 나승, 사출성형 조건에 따른 정밀 플라스틱 나사의 형상정밀도 고찰, 대한기계학회 생산 및 설계공학부문 춘계학술대회 논문집, 2010
Books
- 권대봉, 3D프린터개발(제어프로그램개발), 저서, 9791133947874, 한국직업능력개발원, 2017
- 권대봉, 3D프린터개발(품질보증), 저서, 9791133947898, 한국직업능력개발원, 2017
- 권대봉, 3D프린터개발(기구개발), 저서, 9791133947843, 한국직업능력개발원, 2017
- 권대봉, 3D프린터개발(응용소프트웨어개발), 저서, 9791133947881, 한국직업능력개발원, 2017
- 권대봉, 3D프린터개발(빌드장치개발), 저서, 9791133947867, 한국직업능력개발원, 2017
- 권대봉, 3D프린터개발(구동장치개발), 저서, 9791133947850, 한국직업능력개발원, 2017
- 권대봉, 3D프린터개발(회로개발), 저서, 9791133947836, 한국직업능력개발원, 2017
- 권대봉, 3D프린터개발(소재개발), 저서, 9791133947829, 한국직업능력개발원, 2017
- 권대봉, 3D프린터개발(시장분석), 저서, 9791133947805, 한국직업능력개발원, 2017
- 권대봉, 3D프린터개발(개발계획수립), 저서, 9791133947812, 한국직업능력개발원, 2017
Patents
- 다공성 캐스트 및 그의 제조 방법, 특허 등록, 대한민국, 2017
- 카메라렌즈용 사출성형품, 디자인 등록, 대한민국, 2016
- 카메라렌즈용 사출성형품, 디자인 등록, 대한민국, 2016
- 카메라렌즈용 사출성형품, 디자인 등록, 대한민국, 2016
- 카메라렌즈용 사출성형품, 디자인 등록, 대한민국, 2016
- 렌즈용 사출 성형품, 특허 등록, 대한민국, 2016
- 불투명 유체를 이용한 2차원 영상 촬영 장치, 그러한 장치를 포함하는 3차원 스캐닝 장치 및 방법, 특허 등록, 대한민국, 2015
- 미세패턴 곡면 형성장치 및 이를 이용한 미세패턴 곡면 형성방법, 특허 등록, 대한민국, 2015
- 다중 미세 패턴 성형 장치 및 방법, 특허 등록, 대한민국, 2014
- 증기 압축 사이클을 이용한 금형 ?, 특허 등록, 대한민국, 2012
- 초음파를 이용한 고분자 기판 미세, 특허 등록, 대한민국, 2012
- 초음파를 이용한 선택적 미세 패턴, 특허 등록, 대한민국, 2012
- 초음파를 이용한 고분자 기판 미세 형상 성형 장치, 특허 출원, 대한민국, 2011
- 초음파 직접성형에 의한 플라스틱 미세패턴 성형장치, 특허 출원, 대한민국, 2011
Projects
- 나노카본기반 면상발열체를 적용한 사출금형 급속 가열 및 냉각기술 개발, 한국산업기술평가관리원, 2019.07.~2021.12.
- 금속 프린팅 기술을 이용한 성형회로부품 제조기술 연구, 산학협력단, 2019.03.~2020.02.
- 적층제조 특화설계 기반 혁신적 설계기법 연구, 한국연구재단, 2019.03.~2023.02.
- 3D 프린팅 특화 CAE 해석기술 개발, 한국기계연구원, 2019.01.~2021.12.
- 개인맞춤형 마우스피스형 칫솔의 3차원 설계, (주)캐리마, 2019.01.~2019.03.
- A study on micro injection molding using ultrasonic vibration energy, 산학협력단, 2018.09.~2019.08.
- 열전발전기의 단열성능 개선을 위한 열전달 해석, 메카솔루션주식회사, 2018.04.~2018.09.
- Investigation on Anisotropy according to Printing Conditions for a Photo-polymerization Type 3D Printer, 산학협력단, 2017.11.~2018.10.
- 유한요소망을 이용한 다공성 박판 구조물의 자동설계, 산학협력단, 2017.08.~2018.07.
- 금속 다이캐스팅/플라스틱 사출 통합 성형을 위한 원천기술개발, 한국산업기술평가관리원, 2017.07.~2019.12.
- 개인맞춤형 스포츠/재활보조기구 제작을 위한 다중노즐방식 3D프린터 및 고강도 플라스틱 소재 기술개발, 한국산업기술평가관리원, 2016.05.~2018.12.
- 마이크로스피커 진동판 제작을 위한 초음파 성형시스템 개발, (재)연구성과실용화진흥원, 2016.05.~2018.05.
- 3차원 격자생성기법을 적용한 경량구조물 설계기술, 산학협력단, 2015.12.~2016.11.
- 다공성 박판형 러너를 적용한 초소형 렌즈 사출성형, 산학협력단, 2015.07.~2016.01.
- 초소형 플라스틱 렌즈 사출성형의 CAE 해석, 산학협력단, 2014.12.~2015.06.
- 열탄성 CAE 해석을 적용한 권선PI 다단금형 구조 최적화, 삼성전기(주), 2014.09.~2015.01.
- 초음파 진동에너지를 이용한 고분자 이종 재질 진동판의 제조시스템 기술개발, 중소기업청, 2014.07.~2016.06.
- 차세대 자동차 부품산업용 하이브리드 검사기술 개발, 중소기업청, 2014.07.~2016.06.
- 공학설계 교육과정에서의 3차원 프린팅 활용, 산학협력단, 2014.05.~2014.11.
- 풀림방지 나사의 코팅조건에 따른 체결력 평가, (주)서울금속, 2014.03.~2014.10.
- 2014년도 대학 산학협동교육 지원사업(I-ACE), (재)산학협동재단, 2014.03.~2015.02.
- 열성형 진동판의 미세주름 두께변화가 진동특성에 미치는 영향 분석, 산학협력단, 2013.09.~2014.02.
- 탄두시스템 생존성 및 관통현상 연구용역(금속초고속 충돌파괴 전산모사 S/W개발), 국방과학연구소, 2013.06.~2015.11.
- 초음파 임프린팅을 사용한 Micro/Nano 기능성 미세패턴 성형기술 개발, 한국연구재단, 2013.06.~2016.05.
- 두께 7mm급 이하 차세대 휴대폰 적용을 위한 체결력 100% 이상 향상된 마이크로 나사 설계 및 생산기술 개발, 한국산업기술평가관리원, 2013.06.~2017.05.
- 미세패턴 고분자 표면의 전자빔 조사를 통한 친/소수성 복합표면 제조기술 개발, 한국연구재단, 2013.06.~2015.05.
- 2013년도 대학 산학협동교육 지원사업(I-ACE), (재)산학협동재단, 2013.03.~2014.02.
- 마이크로 스피커 진동판의 형상설계에 따른 진동특성 분석, 산학협력단, 2013.03.~2014.02.
- 150um이하 미세크랙 검사기능을 갖는 볼트류 전면검사 시스템 개발, 중소기업청, 2012.09.~2014.08.
- 사출금형 표면온도 예측을 위한 열접촉 전도도의 결정, 산학협력단, 2012.09.~2013.02.
- HDD base 프레스성형공정의 Simulation, 렌즈금형 초음파가진에 의한 전사성 향상기술, 삼성전기주식회사, 2012.07.~2013.06.
- 펄스 냉각방식을 적용한 사출성형의 다중사이클 해석, 산학협력단, 2012.05.~2013.02.
- 2012년도 대학 산학협동교육 지원사업(I-ACE), (재)산학협동재단, 2012.03.~2013.02.
- 마이크로 금속소재 기능성 핵심요소부품 초정밀 점진성형기술 개발, 한국생산기술연구원, 2010.10.~2011.09.
- 초정밀 마이크로 부품 성형을위한 공정설계 및 해석 인력양성, 한국산업기술진흥원, 2010.09.~2013.02.
- 글로벌 경쟁력을 갖춘 산학협력 특성화 혁신센터 사업, 한국산업기술진흥원, 2010.07.~2011.04.
- 차세대 조립 및 평가장비개발, (주)고려반도체시스템, 2010.06.~2012.05.
- 고부가가치 정밀금형 및 성형기술 연구회, 중소기업기술정보진흥원, 2010.06.~2010.10.
- 이동통신기기용 초소형 체결부품 고신뢰성 비전검사시스템 개발, 한국산업기술진흥협회, 2010.05.~2011.12.
- 초음파 직접성형에 의한 LCD용 도광판 미세패턴의 고효율 성형기술 개발, 한국연구재단, 2010.05.~2013.04.
수상
- 2021년도 연구분야 우수교원 표창, 우수교원 표창, 서울과학기술대학교, 2022
- CNT Web 기반 곡면형 사출금형 균일 가열, 우수발표논문상, 한국생산제조학회, 2022
- g-DLP 프린팅과 선택적 후경화를 통한 기계적 메타물질 개발, 최우수상, 한국공작기계산업협회, 2021
- 4D printing using anisotropic thermal deformation of 3D-printed thermoplastic parts, 주봉학술상, 대한기계학회, 2021
- Investigation of thermal insulation characteristic of metal lattice structure, Best Poster Award, PRESM2020, 2020
- 4D Printing using Thermal Anisotropy of Additively Manufactured Thermoplastic Parts, Best Paper Award (ICMTE2020), International Conference of Manufacturing Technology Engineers (ICMTE 2020), 2020
- DfAM을 적용한 장애인 아이스하키용 썰매 프레임 경량 설계, 정밀공학 창의경진대회 최우수상, 한국정밀공학회, 2019
- 국부적 가열을 적용한 사출금형의 열특성 고찰, 학술대회 최우수논문상, 한국정밀공학회, 2019
- 압출적층형 3차원 프린터의 고온 압출부 설계를 위한 열-구조 연계 수치해석, 제 29회 과학기술우수논문상, 한국과학기술단체총연합회, 2019
- Development of MID rapid processing technology using FDM 3D printing, Best Poster Award, ICMDT2019, 2019
- 다공성 캐스트 및 그의 제조 방법, 특허발명대전 은상, 특허청, 2018
- 고분자 표면의 전자빔 조사에 따른 젖음 특성 고찰, 한국정밀공학회지 최우수논문상, 한국정밀공학회, 2017
- Development of micro-molding technology using ultrasonic vibration energy, ASPEN2017 Best Paper Award, Asian Society of for Precision Engineering and Nanotechnology, 2017
- Ultrasonic thermoforming of a spaeker diaphragm with the aid of infrared heating, KSME Student Paper Award, International Conference on Manufacturing, Design and Tribology, 2017
- 초음파 성형시 진동판의 균일도 향상을 위한 혼 설계 , 2016 추계학술대회 최우수상, 한국정밀공학회, 2017
- 설계및 재료분야 업적, 학술상, 한국정밀공학회, 2016
- 초음파 임프린팅에서 금형온도에 따른 미세패턴의 전사특성 연구, 대한기계학회논문집 우수논문상, 대한기계학회, 2015
- Design and analysis of ultrasonic horn for polymer sheet forming, Ourstanding Presenter Award, ISGMA2015 Orgarnization Committee, 2015
- CAD응용설계, 융합교육 우수사례 경진대회 최우수상, 서울과학기술대학교, 2015
- 고분자 미세패턴 제작을 위한 초음파 임프린팅 시스템 구축, 효석학술상, 대한기계학회, 2014
- 선택적 초음파 임프린팅을 이용한 복합 미세패턴 복제기술, 최우수상(2014년 춘계학술대회), 한국정밀공학회, 2014
- Development of Ultrasonic Imprinting for Micropattern Replication, Young Researcher Award, International Symposium on Green Manufacturing and Application, 2014
- 마스크 필름을 이용한 서택적 초음파 임프린팅 공정 개발, 논문 우수발표상, 한국생산제조시스템학회, 2014
- 볼트부품 전면검사용 비전시스템의 광학계 해석기술, 최우수상 (학술대회 논문발표), 한국정밀공학회, 2013
- 다중물리계 전산모사기술을 활용한 재료성형공정의 고도화기술 개발, 신진학술상, 한국소성가공학회, 2013
- 상악동 골에 이식된 임플란트가 주위응력에 미치는 영향에 대한 3차원 유한요소해석, WISET-KSME 젊은 여성연구자 상 (2012년도 대한기계학회 춘계학술대회 우수논문 선정), 대한기계학회+한국여성과학기술인지원센터, 2012
- 초음파 패턴성형시 패턴 방향에 따른 전사특성 고찰, 한국생산제조시스템학회 2012 춘계학술대회 논문 우수발표상, 한국생산제조시스템학회, 2012
- 2011 ASPEN Best Paper Award(Damage Prediction in Multistep Forging of a Precision Screw), ASPEN, 2011
- 2009학년도 교육분야 우수교수 선발 포상, 서울산업대학교(교수학습개발센터), 2010