Name Kim Seong-Keol
Position professor
Tel +82-2-970-6855
E-mail rhett@seoultech.ac.kr
Biography
B.Sc: Dept. of Mechanical Design and Production Engineering,
Seoul National University, Seoul, Korea, 1986

M.S: Dept. of Mechanical Design and Production Engineering,
Seoul National University, Seoul, Korea, 1988

Ph.D: Dept. of Mechanical Design and Production Engineering,
Seoul National University, Seoul, Korea, 1994
Selected Publications
S.K.Kim, 2014 Journal of Mechanical science and Technology. 28(3), 859-866. A Study on the Design of a New Power Transmission for Wind Turbines. SCIE

S.K.Kim, 2010 International Journal of precision Engineering and Manufacturing. 11(2), 285-289. Simulations of the Vibration Response of Mannequins in Car Seats by Changing Parameter and Excitation. SCIE

S.K.Kim, 2009 Journal of Mechanical science and Technology. 23, 2206-2214. Improvements for Reduction of the Brake Squeal Noise at Seoul Metro Rolling Stock on Tracks. SCIE

S.K.Kim, S.W.White, P.Davies and A.K.Bajaj July 2003 Journal of Sound and Vibration 264(1), 49-90. Simplified models of the vibration of mannequins in car seats. SCI

S.K.Kim and S.Y.Lee April 2001 Journal of the Sound and Vibration 241(4), 567-586. Chatter Prediction of End Milling in a Vertical Machining Center. SCI

S.W.White, S.K.Kim, A.K.Bajaj, P.Davies, D. K. Showers and P. E. Liedtke July 2000 Nonlinear Dynamics, 22(3): 281-313. Experimental Techniques and Identification of Nonlinear and Viscoelastic Properties of Flexible Polyurethane Foam. SCI

S.K.Kim and J.M.Lee 1999 Journal of the Sound and Vibration 223(5), 723-740. Analysis on the Nonlinear Vibration Characteristics of a Belt Driven System. SCI

S.K.Kim October 2002 International Journal of the Korean Society of Precision Engineering Vol.3, No.4, pp. 87-93. Dynamic System Analysis of Machine Tool Spindles with Magnet Coupling.

S.K.Kim July 2002 International Journal of the Korean Society of Precision Engineering Vol.3, No.3, pp. 82-89. Dynamic Analysis on Belt-Driven Spindle of Machine Tools.

S.K.Kim, J M.Jang, J.M.Hwang and M.C.Park, 2012 ICMTE(International Conference of Manufacturing Technology Engineers), Seoul, Korea, 2012 October 18-19. Korea.

J.H.Kim, S.K.Kim and J.H.Kim, The 2nd World Tribology Congress, Vienna, Austria, 2001 September 3-7. The Influence of Surface Roughness on Thermohydrodynamic Analysis.

S.K.Kim, S.W.White, P.Davies, A.K.Bajaj, K.H.Park and J.H.Kim, The 30th International Congress and Exhibition on Noise Control Engineering, The Hague, The Netherlands, 2001 August 27-30. Modeling the Vibration Response of Mannequins in Car Seats about a Static Equilibrium Point

S.W.White, S.K.Kim, P.Davies and A.K.Bajaj, Proceedings of the 1999 SAE Noise and Vibration Conference, Traverse City, Michigan, May 1999. 99NV-206: Modeling and Measurement of Occupied Car Seats.

S.W.White, S.K.Kim, A.K.Bajaj and P. Davies, D.K. Showers and P.E. Liedtke at the Seventh Conference on Nonlinear Vibrations, Stability and Dynamics of Structures and Mechanisms, Blacksburg, Virginia, July 1998. Identification of nonlinear and viscoelastic properties of flexible polyurethane foam.

S.G.Kim, S.Y.Lee and J.M.Lee, "Chatter Prediction of End-milling in a Vertical Machining Center", Proceedings of Pacific Conference on Manufacturing ’96, No. II, pp. 43-48, Seoul, October, 1996.

J.W.Lee, S.G.Kim, S.I.Lee, K.H.Ko and J.M.Lee, "A Dynamic Analyses of Complex Structures
with Joints", 13th International Modal Analysis Conference, vol. 1, pp. 331-337, Nashville, Tennessee, U.S.A, February 1995.
Journal Papers
- Modal Analysis of a High-Speed Winder with Optimization, Journal of the Korean Society of Manufacturing Technology Engineers, vol.30 No.4 pp.301~307, 2021
- Design of an Automatic Stone Flicking Machine, Journal of the Korean Society of Manufacturing Technology Engineers, vol.29 No.3 pp.216~226, 2020
- Warpage Analysis of a Panel Level Packaging, 한국생산제조학회지, vol.28 No.4 pp.203~209, 2019
- Investigation on acoustic characteristics of micro-speaker diaphragm according to corrugation depth using finite element analysis, Journal of the Korean Society for Precision Engineering, vol.34 No.8 pp.569~574, 2017
- Design and Making of a Handmade Vehicle with a Formula in 2016, 한국생산제조학회지, vol.26 No.1 pp.82~88, 2017
- Design and Manufacturing of Miniature Three-Wheel Pitching Machine, Journal of the Korean Society of Manufacturing Technology Engineers, vol.26 No.1 pp.130~136, 2017
- Design and Manufacture of Therapeutic Dolls for Pulse Measurement of Elderly Patients with Dementia, 한국생산제조시스템학회지, vol.24 No.5 pp.561~567, 2015
- Design and Manufacture of a Hand-made Vehicle Based on a Formula, 한국생산제조시스템학회지, vol.24 No.5 pp.568~575, 2015
- Prediction of the Impact Lifetime for Board-Leveled Flip Chips by Changing the Design Parameters of the Solder Balls, 한국생산제조시스템학회지, vol.24 No.1 pp.117~123, 2015
- A study on improving dynamic characteristics of a front lower suspension arm and aerodynamic effects of a hand-made hybrid vehicle, INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, vol.15 No.9 pp.1897~1908, 2014
- Prediction of Impact Life Time in Solder Balls of the Board Level Flip Chips by Drop Simulations, 한국생산제조시스템학회지, vol.23 No.3 pp.237~242, 2014
- A study on the design of a new power transmission for wind turbine, Journal of Mechanical Science and Technology, vol.28 No.3 pp.859~866, 2014
- 마이크로 스피커 진동판의 형상설계에 따른 진동특성 고찰, 한국정밀공학회지, vol.30 No.8 pp.790~796, 2013
- A Study on the Design and Manufacturing of the Blind System with Auto-controlled Illuminance, Journal of the Korean Society of Manufacturing Technology Engineers, vol.22 No.3 pp.615~621, 2013
- 몰드물성 종류 및 칩 크기 변화에 따른 웨이퍼 레벨 SIP에서의 열 피로 해석, 한국생산제조시스템학회지, vol.22 No.3 pp.504~508, 2013
- Warpage Simulation by the CTE mismatch in Blanket Structured Wafer Level 3D packaging, Journal of the KSMTE, vol.22 No.1 pp.168~172, 2013
- Board Level Drop Simulations and Modal Analysis in the Flip Chips with Solder Balls of Sn-1.0Ag-0.5Cu Considering Underfill, 한국생산제조시스템학회지, vol.21 No.2 pp.225~231, 2012
- Dynamic Reliability of Board Level by Changing the Design Parameters of Flip Chips, 한국생산제조시스템학회지, vol.20 No.5 pp.559~563, 2011
- Vibration Analysis for a Feeding Unit of Vision Inspection System of Precision Screws, 한국생산제조시스템학회지, vol.20 No.4 pp.446~451, 2011
- Board-Level Drop Analyses having the Flip Chips with Solder balls of Sn-3.0Ag-0.5Cu and Sn-1.0Ag-0.5Cu, 한국생산제조시스템학회지, vol.20 No.2 pp.193~201, 2011
- Simulation of Thermal Fatigue Life Prediction of Flip Chip with Lead-free Solder Joints by Variation in Bump Pitch and Underfill, 한국공작기계학회지, vol.19 No.2 pp.157~162, 2010
- Simulations of the Vibration Response of Mannequins in Car Seats by Changing Parameter and Excitation, INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, vol.11 No.2 pp.285~289, 2010
Conference Papers
- 김종윤, 손영상, 정연미, 김성걸, Eigenvalue analysis of a bobbin holder using multi-body dynamics, KSMTE ANNUAL AUTUMN CONFERENCE 2021, 제주시 KAL 호텔, 2021
- 김종윤, 정연미, 손영상, 김성걸, Modal analysis of a bobbin holder considering rings and sleeves, KSMTE ANNUAL AUTUMN CONFERENCE 2021, 제주시 KAL 호텔, 2021
- 조호선, 박지수, 이종원, 이병민, 최상목, 김성걸, Mechanical design of a logistic branching device with slide shoe sorter, KSMTE ANNUAL AUTUMN CONFERENCE 2021, 제주시 KAL 호텔, 2021
- 김종윤, 정연미, 손영상, 김성걸, Modal analysis of a bobbin holder by boundary conditions, 2021 한국생산제조학회 춘계학술대회 논문집, 강원도 강릉시 세인트존스 호텔, 2021
- 김종윤, 강지완, 김성걸, Modal analysis for 3-axis control CBN grinding machine, Proceedings of KSMTE Anual Autumn Conference 2020, 제주 KAL호텔 제주시 제주도, 2020
- 김경환, 오준협, 조희윤, 이진호, 김성걸, Design of automatic stone shooting machine II, Proceedings of KSMTE Anual Autumn Confernece 2020, 제주 KAL호텔 제주시 제주도, 2020
- 박덕화, 김종윤, 김성걸, Dynamic analysis of a bobbin holder, Proceeedings of KSMTE Anual Autumn Conference 2020, 제주 KAL호텔 제주시 제주도, 2020
- Jong Yun Kim, Deok Hwa Park, Seong Keol Kim, Dynamic Analysis of a High Speed Winder with Optimization, Proceedings of The 9th International Conference of Manufacturing Technology Engineers, Lotte Resort Sokcho, KOREA, 2020
- 설희승, 김준현, 김영헌, 조수한, 주다훤, 김성걸, 알까기 로봇(R-bot), 2019 한국생산제조학회 추계학술대회 초록집, 제주시 KAL 호텔, 2019
- 강현제, 김성걸, RECURDYN을 이용한 고속와인더의 해석, 2019 한국생산제조학회 추계학술대회 초록집, 제주시 KAL 호텔, 2019
- 이준호, 신동환, 김성걸, 고속와인더의 진동해석, 2017 KSMTE 추계학술대회 논문집, 제주시 제주 KAL호텔, 2017
- 손기정, 이종록, 김성한, 김성걸, 피칭머신 올인원, 2017 KSMTE 추계학술대회 논문, 제주도 제주시 제주 KAL호텔, 2017
- 주민석, 김현수, 윤대희, 이동희, 김성, 자동 수술 보조 로봇 팔, 2017 KSMTE 추계학술대회 논문집, 제주시 제주KAL호텔, 2017
- Ho-Jin Bae, Hyun-Jung Lee, Seong Keol Kim and Keun Park, Numerical Analsys of Vibration Characteristics of Micro-speaker Module According to Formability of Micro-corrugations, Proceedings of The 7th International Conference on Manufacturing, Machine Design and Tribology, Ramada Plaza Jeju Hotel, 2017
- Yun ki Kim, Yeong Hun Ban, Dong Eon Lee, Hyung Taek Lim and Seong Keol Kim, Design of a Pitching Machine, Proceedings of The 7th International Conference on Manufacturing, Machine Design and Tribology, Ramada Plaza Jeju Hotel, 2017
- 김윤기, 반영훈, 이동언, 임형택, 김성걸, 축소형 피칭머신의 설계, 2016 한국생산제조학회 추계학술대회 논문집, 제주시 KAL 호텔, 2016
- 김대현, 김성걸, 탄성 및 점탄성 성질을 고려한 반도체 Package Warpage Simulation, 2016 한국생산제조학회 추계학술대회 논문집, 제주도 제주시 KAL호텔, 2016
- 김성걸, 이지훈, 신명철, 김승조, 김영진, Development of music & AV server with Raspberry Pi, Proceeding of the KSMTE Annual Automn Conference 2015, 제주 KAL 호텔, 2015
- 이수진, 김성걸, Drop simulation of board level by changing the design parameters of flip chips, KSMTE Autumn Conference 2014, 제주도 제주시 KAL 호텔, 2014
- 김성걸, 정한진, 장총, Drop Impact Life Anaysis of Flip-chip Solder Balls at the Board Level, KSMTE Autumn Conference 2013, 제주 KAL 호텔, 2013
- 김성걸, 권승택, 송성한, 송인천, 이현민, 장총민, Design and Manufacturing of Automated Doors in Show-case, KSMTE Spring Conference 2013, 부산 Bexco, 2013
- Seong Keol Kim, Chong-Min Jang, Jung-Min Hwang, Man-Chul Park, Warpage Simulation of Wafer Level 3D Packaging, Proceedings of the International Conference of Manufacturing Technology Engineers 2012, Seoul, Korea, 2012
- 이갑수, 주문건, 이헌진, 이지환, Development of Automatic Pitching Machine, 2012 한국생산제조시스템학회 춘계학술대회 논문집, 제주도 제주시, 2012
- 임은모, 언더필을 고려한 플립칩에서의 보드레벨 동적해석, 한국생산제조시스템학회 2011년 추계학술대회논문집, 대전광역시 컨벤션센터, 2011
- 김한중 임승영 김순영 양인영 안은, 플립침에서 솔더볼의 매개변수 변화에 따른 동적해석평가, 한국공작기계학회 2010 추계학술대회논문집, 조선대학교, 2010
Books
- 송철기, 김관주, 김석, Mechanical Vibration CORE, 저서, 978-89-98886-89-9, 교보문고, 2015
- 송철기, Mechanical Vibration, 저서, 978-89-98886-05-9, 교보문고, 2013
Projects
- 대면적 패널 패키징의 휨 해석, 산학협력단, 2019.03.~2020.02.
- 비전을 이용한 자동 수술 보조 로봇 팔, 산학협력단, 2018.01.~2018.08.
- 핸드사인 장갑으로 조정하는 미니어처 3휠 피칭머신 설계, 산학협력단, 2018.01.~2018.08.
- 스리랑카 콜롬보 중앙직업훈련원 및 감파하 고등기술센터 건립사업 교육훈련 위탁용역, 대외경제협력기금, 2017.08.~2018.06.
- 고속 와인더 적용 필드 발란싱 기법 및 제어 보드/프로그램 개발, 일진에이테크(주), 2016.03.~2016.11.
- TDBI 공정 후 Warpage 예측 System 구축, 에스케이하이닉스 주식회사, 2015.09.~2016.08.
- 반도체 장비/공정/소자 분야 맞춤형 교육 프로그램 개발, 에스케이하이닉스 주식회사, 2015.09.~2015.12.
- 포뮬러 형태의 자작자동차 설계 및 제작, 산학협력단, 2015.05.~2016.02.
- 치매노인의 맥박측정 및 심신 안정을 위함 인형의 설계 및 제작, 산학협력단, 2015.05.~2016.02.
- 플립칩의 매개변수 변화에 따른 보드 레벨에서의 솔더볼 충격피로수명에 관한 연구, 산학협력단, 2014.11.~2015.02.
- 낙하해석을 통한 보드 레벨에서의 솔더볼 충격피로수명에 관한 연구, 산학협력단, 2014.03.~2014.12.
- 2014년도 대학 산학협동교육 지원사업(I-ACE), (재)산학협동재단, 2014.03.~2015.02.
- 고성능 탁상용 하이파이 스피커에 대한 진동 평가 연구, 카시오페아음향, 2013.09.~2013.12.
- [2차년도 LINC사업] 휴먼 캐어를 위한 고성능 탁상용 하이파이 스피커 개발, 서울과학기술대학교 산학협력단, 2013.06.~2014.01.
- 2013년도 대학 산학협동교육 지원사업(I-ACE), (재)산학협동재단, 2013.03.~2014.02.
- 몰드물성 종류 및 칩 크기 변화에 따른 웨이퍼 레벳 Sip에서의 열 피로 모사, 산학협력단, 2013.03.~2014.02.
- 자동 조도 조절 블라인드 시스템 설계 및 제작에 대한 연구, 산학협력단, 2013.03.~2014.02.
- 웨이퍼 레벨 3D 패키징에서의 워피지(Warpage)해석, 산학협력단, 2012.09.~2013.02.
- 2012년도 대학 산학협동교육 지원사업(I-ACE), (재)산학협동재단, 2012.03.~2013.02.
수상
- 2016학년도 교육분야 우수교원, 2016학년도 교육분야 우수교원, 교수학습개발센터, 2017