Name Byoungchul Hwang
Position professor
Tel +82-2-970-6638
Fax 02-973-6657
E-mail bhwang@seoultech.ac.kr
Biography
2004, Ph.D., Materials Science and Engineering, Pohang University of Science and Technology (POSTECH), Pohang, Korea
2001, M.S. , Materials Science and Engineering, Pohang University of Science and Technology (POSTECH), Pohang, Korea
1999, B.S., Metallurgical Engineering, Yonsei University, Seoul, Korea
Careers
2013-Present, Associate/Associate Professor, Department of Materials Science and Engineering, Seoul National University of Science and Technology, Seoul, Korea
2019-2020, Research Scholar, University of California, Irvine, CA, USA
2006-2013, Senior Researcher, Advanced Metallic Materials Division, Korea Institute of Materials Science, Changwon, Korea
2005-2006, Postdoctoral Research Associate, Division of Engineering, Brown University, Providence, RI, USA
2004-2005, Postdoctoral Research Scientist, Center for Advanced Aerospace Materials (CAAM), POSTECH, Pohang, Korea
Research Areas
Deformation and Fracture Mechanics
Development of Advanced Structural Materials
Microstructure Control and Mechanical Behavior
Journal Papers
- Artificial Neural Network for Modeling the Tensile Properties of Ferrite-Pearlite Steels: Relative Importance of Alloying Elements and Microstructural Factors, METALS AND MATERIALS INTERNATIONAL, vol.27 No.10 pp.3935~3944, 2021
- APPLICATION OF ARTIFICIAL NEURAL NETWORK TO PREDICT THE TENSILE PROPERTIES OF DUAL-PHASE STEELS, ARCHIVES OF METALLURGY AND MATERIALS, vol.66 No.3 pp.719~723, 2021
- Correlation of Delta-Ferrite with Tensile and Charpy Impact Properties of Austenitic Fe-23Mn-Al-C Steels, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, vol.52 No.9 pp.4170~4180, 2021
- EBSD microstructural analysis of AB-type TiFe hydrogen storage alloys, MATERIALS CHARACTERIZATION, vol.178, 2021
- Application of Artificial Neural Network to the Prediction of Tensile Properties in High-Strength Low-Carbon Bainitic Steels, METALS, vol.11 No.8, 2021
- Predictive integrated numerical approach for modeling spatio-temporal microstructure evolutions and grain size dependent phase transformations in steels, INTERNATIONAL JOURNAL OF PLASTICITY, vol.139, 2021
- Enhancement of the tensile properties and impact toughness of a medium-Mn steel through the homogeneous microstrain distribution, MATERIALS CHARACTERIZATION, vol.174, 2021
- 700 MPa급 고강도 내진 철근의 미세조직과 기계적 특성에 미치는 템프코어 공정의 영향, 소성가공, vol.30 No.2 pp.91~98, 2021
- Hydrogen storage behavior and microstructural feature of a TiFe-ZrCr2 alloy, JOURNAL OF ALLOYS AND COMPOUNDS, vol.853, 2021
- Effect of Nb addition and Pre-strain on Hydrogen Embrittlement of Low-carbon Steels with Ferrite-pearlite Structure, KOREAN JOURNAL OF METALS AND MATERIALS, vol.58 No.11 pp.752~758, 2020
- Effect of Annealing Treatment on Microstructure and Hydrogen Embrittlement of Ti-6Al-4V Alloys Subject to Electrochemical Hydrogen Charging, 소성가공, vol.29 No.4 pp.211~217, 2020
- Yielding behavior and strain aging properties of bake hardening steel with dual-phase microstructure, Korean Journal of Materials Research, vol.30 No.6 pp.315~320, 2020
- Effect of Bainitic Microstructure on Low-Temperature Toughness of High-Strength API Pipeline Steels, KOREAN JOURNAL OF METALS AND METERIALS, vol.58 No.5 pp.293~303, 2020
- Comparative Study of Hydrogen Embrittlement of Three Heat-resistant Cr-Mo Steels Subjected to Electrochemical and Gaseous Hydrogen Charging, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, vol.51 No.5 pp.2118~2125, 2020
- Correlation of microstructure with tensile behavior and properties of API X70 pipeline steels subjected to strain aging, JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, vol.27 No.3 pp.319~324, 2020
- Effect of austempering time on the microstructure and mechanical properties of ultra-high strength nanostructured bainitic steels, Korean Journal of Materials Research, vol.30 No.2 pp.87~92, 2020
- Effect of heat treatment on microstructure and mechanical properties of an Fe-6.5Mn-0.08C medium-manganese steel, Korean Journal of Materials Research, vol.31 No.1 pp.8~13, 2020
- Effect of intercritical annealing on microstructure and mechanical properties of Fe-9Mn-0.2C-3Al-0.5Si medium manganese steels containing Cu and Ni, Korean Journal of Materials Research, vol.31 No.1 pp.44~49, 2020
- Tensile and fracture behaviors of austenitic high-manganese steels subject to different hydrogen embrittlement test methods, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, vol.766, 2019
- Effect of Austempering on Microstructure and Mechanical Properties of High-Carbon Nano-Bainite Steels, 소성가공, vol.28 No.4 pp.219~225, 2019
- Microstructure-based prediction of yield ratio and uniform elongation in high-strength bainitic steels using multiple linear regression analysis, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, vol.758 pp.56~59, 2019
- Microstructure and mechanical properties of 600 MPa-grade seismic resistant reinforced steel bars fabricated by a pilot plant, Korean Journal of Materials Research, vol.29 No.6 pp.349~355, 2019
- Dynamic Strain Aging and Serration Behavior of Three High-Manganese Austenitic Steels, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, vol.50A No.4 pp.1693~1700, 2019
- Effect of C, Mn and Al additions on tensile and charpy impact properties of austenitic high-manganese steels for cryogenic applications, Korean Journal of Materials Research, vol.29 No.3 pp.189~195, 2019
- Modeling and experiment on microstructure evolutions and mechanical properties in grade 600 MPa reinforcing steel rebar subjected to TempCore process, Materials Science & Engineering A, vol.745 pp.39~52, 2019
- Deformation behavior and tensile properties of an austenitic Fe-24Mn-4Cr-0.5C high-manganese steel: Effect of grain size, Materials Science & Engineering A, vol.742 pp.334~343, 2019
- Effect of Microstructure on the Strain Aging Properties of API X70 Pipeline Steels, Korean Journal of Materials Research, vol.28 No.12 pp.702~708, 2018
- Effect of Strain Aging on Tensile Behavior and Properties of API X60, X70, and X80 Pipeline Steels, METALS AND MATERIALS INTERNATIONAL, vol.24 No.6 pp.1221~1231, 2018
- Hydrogen Embrittlement Properties of Austenitic Fe-30Mn-0.2C(-1.5Al) High-Manganese Steels for Cryogenic Applications, 열처리공학회지, vol.31 No.6 pp.1~7, 2018
- Comparative Study of Microstructure and Tensile Properties of 600 and 700 MPa-Grade High-Strength Seismic Resistant Reinforced Steel Bars, 소성가공, vol.27 No.5 pp.281~288, 2018
- Effects of Start and Finish Cooling Temperatures on the Yield Strength and Uniform Elongation of Strain-Based API X 100 Pipeline Steels, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, vol.49A No.10 pp.4536~4543, 2018
- Effect of microstructural factors on the strength and deformability of ferrite-pearlite steels with different Mn and V contents, Korean Journal of Materials Research, vol.28 No.10 pp.570~577, 2018
- Effect of isothermal heat treatment on the microstructure and mechanical properties of medium-carbon bainitic steels, Korean Journal of Materials Research, vol.28 No.9 pp.522~527, 2018
- Microstructure and mechanical properties of the high-hardness armor steels, Korean Journal of Materials Research, vol.28 No.8 pp.459~465, 2018
- Microstructure and tensile properties of 700 MPa-grade high-strength and seismic resistant reinforced steel bars, Korean Journal of Materials Research, vol.28 No.7 pp.391~397, 2018
- "Invited Paper" Computer-aided alloy designs of grade 600 MPa reinforced steel bars for seismic safety based on thermodynamic and kinetic calculations: Overview, CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY, vol.62 pp.67~74, 2018
- Correlation of Microstructural Factors with the Yield Ratio and Uniform Elongation in API X80 Linepipe Steels, KOREAN JOURNAL OF METALS AND MATERIALS, vol.56 No.6 pp.413~422, 2018
- Effect of strain rate on tensile and serration behaviors of an austenitic Fe-22Mn-0.7C twinning-induced plasticity steel, Materials Science and Engineering A, vol.711 pp.22~28, 2018
- Microstructure Characteristics and Identification of Low-Carbon Steels Fabricated by Controlled Rolling and Accelerated Cooling Processes, Korean Journal of Materials Research, vol.27 No.11 pp.636~642, 2017
- Hydrogen Embrittlement of Three High-Manganese Steels Tested by Different Hydrogen Charging Methods, KOREAN JOURNAL OF METALS AND MATERIALS, vol.55 No.10 pp.695~702, 2017
- Effect of Strain Aging on the Tensile Properties of an API X70 Linepipe Steel, Korean Journal of Materials Research, vol.27 No.10 pp.524~529, 2017
- Microstructure, hardness and tensile properties of 600 MPa-grade high-strength and seismic resistant reinforcing steels, Korean Journal of Materials Research, vol.27 No.9 pp.477~483, 2017
- Effect of Tempering Temperature on the Microstructure and Mechanical Properties of ARMOX 500T Armor Plate, Korean Journal of Materials Research, vol.27 No.7 pp.357~361, 2017
- Long-term evolution of sigma phase in 304H austenitic stainless steel: Experimental and computational investigation, Materials Characterization, vol.128 pp.23~29, 2017
- Effect of Surface Condition on Tensile Properties of Fe-30Mn-0.2C-(1.5Al) High-Manganese Steels Hydrogen-Charged Under High Temperature and Pressure, Korean Journal of Materials Research, vol.27 No.6 pp.318~324, 2017
- Effects of C and Si on strain aging of strain-based API X60 pipeline steels, Metals and Materials International, vol.23 No.3 pp.450~458, 2017
- Effect of Martensite Fraction on the Tensile Properties of Dual-phase Steels Containing Micro-alloying Elements, J. of the Korean Society for Heat Treatment, vol.30 No.3 pp.1~7, 2017
- Effect of micro-alloying elements and transformation temperature on the correlation of microstructure and tensile properties of low-carbon steels with ferrite-pearlite microstructure, Korean Journal of Materials Research, vol.27 No.4 pp.184~191, 2017
- The effects of prior austenite grain boundaries and microstructural morphology on the impact toughness of intercritically annealed medium Mn steel, Acta Materialia, vol.122 pp.199~206, 2017
- Comparison of Tensile and Impact Properties of Hypo-Eutectoid Steels Containing Micro-Alloying Elements, J. of the Korean Society for Heat Treatment, vol.30 No.1 pp.1~7, 2017
- ffects of metalloid elements on the mechanical properties of Fe-based bulk amorphous alloys, Korean Journal of Materials Research, vol.26 No.12 pp.671~675, 2016
- echnical Developments and Trends of Earthquake Resisting High-Strength Reinforcing Steel Bars, KOREAN JOURNAL OF METALS AND MATERIALS, vol.54 No.12 pp.862~874, 2016
- Influence Nb addition and transformation temperature on impact properties of low-carbon steels, Korean Journal of Materials Research, vol.26 No.11 pp.590~597, 2016
- Recrystallization Behavior in the Two-Phase (α+γ) Region of Micro-Alloyed Steels, Korean Journal of Materials Research, vol.26 No.11 pp.583~589, 2016
- Effect of micro-alloying elements on recrystallization behavior of carbon steels at different strain rates, Korean Journal of Materials Research, vol.26 No.10 pp.535~541, 2016
- Sensitivity of Microstructuml Factors Influencing the Impact Toughness of Hypoeutectoid Steels with Ferrite-Pearlite Structure using Multiple Regression Analysis, KOREAN JOURNAL OF METALS AND MATERIALS, vol.54 No.9 pp.637~644, 2016
- Effect of Nb Contents and Processing Parameters on Dynamic Recrystallization Behavior of 0.15C-0.2Si-0.5Mn Low-Carbon Steels, Journal of the Korean Society for Heat Treatment, vol.29 No.5 pp.1~7, 2016
- Hydrogen embrittlement of two austenitic high-manganese steels using tensile testing under high-pressure gaseous hydrogen, Korean Journal of Materials Research, vol.26 No.7 pp.353~358, 2016
- Analysis of Cracking Phenomenon Occurring During Hot Rolling of Fe-23Mn High-manganese Steels with Different Aluminium and Carbon Contents, Journal of the Korean Society for Heat Treatment, vol.29 No.4 pp.1~5, 2016
- Correlation Between Microstructures and Tensile Properties of Strain-Based API X60 Pipeline Steels, Metall. Mater. Trans. A, vol.47A No.6 pp.2726~2738, 2016
- Effect of grain size on the tensile properties of an austenitic high-manganese steel, Korean Journal of Materials Research, vol.26 No.6 pp.325~331, 2016
- Influence of strain rate on tensile properties and dynamic strain aging of an Fe-24.5Mn-4Cr-0.45C alloy, Korean Journal of Materials Research, vol.26 No.5 pp.281~286, 2016
- Effect of Microstructural Factors on Strength and Ductility in Hypoeutectoid Steels with Ferrite-Pearlite Structure, Journal of the Korean Society for Heat Treatment, vol.29 No.1 pp.1~7, 2016
- Influence of Nb addition and austenitizing temperature on the hardenability of low-carbon boron steels, Korean Journal of Materials Research, vol.25 No.11 pp.577~582, 2015
- Effect of microstructural factors on room- and low-temperature impact toughness of hypoeutectoid steels with ferrite-pearlite structure, Korean Journal of Materials Research, vol.25 No.11 pp.583~589, 2015
- Effect of grain size on ductile-brittle transition behavior of austenitic Fe-18Cr-10Mn-N-C alloys, Korean Journal of Materials Research, vol.25 No.10 pp.559~565, 2015
- Effects of Finish Cooling Temperature on Tensile Properties After Thermal Aging of Strain-Based API X60 Linepipe Steels, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, vol.46A No.9 pp.3989~3998, 2015
- Effect of Austenitizing Temperature on the Hardenability and Tensile Properties of Boron Steels, Korean J. Mater. Res., vol.25 No.9 pp.497~502, 2015
- Effect of Pearlite Interlamellar Spacing on Impact Toughness and Ductile-Brittle Transition Temperature of Hypoeutectoid Steel, Korean Journal of Materials Research, vol.25 No.8 pp.417~422, 2015
- Effect of finish cooling temperature on microstructure and mechanical properties of high-strength bainitic steels containing Cr, Mo, and B, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, vol.624 pp.14~22, 2015
- Effects of B and Cu Additions on the Microstructure and Mechanical Properties of High-Strength Bainitic Steels, Journal of the Korean Society for Heat Treatment, vol.28 No.2 pp.75~81, 2015
- Ductile-to-Brittle Transition Behavior of Two Austenitic Fe-18Cr-10Mn Alloys with the Combined Addition of Nitrogen and Carbon, Journal of the Korean Society for Heat Treatment, vol.28 No.1 pp.1~6, 2015
- Effects of tempering treatment on microstructure and mechanical properties of Cu-bearing high-strength steels, Kor. J. Mater. Res., vol.24 No.10 pp.550~555, 2014
- Effect of Cu and B on Effective Grain Size and Low-Temperature Toughness of Thermo-Mechanically Processed High-Strength Bainitic Steels, Kor. J. Mater. Res., vol.24 No.10 pp.520~525, 2014
- Effect of W Addition on the Hardenability of Low-Carbon Boron Steels, Kor. J. Mater. Res., vol.24 No.9 pp.488~494, 2014
- Effects of Rolling and Cooling Conditions on Microstructures and Mechanical Properties of High-Deformable Pipeline Steels, J. of the Korean Society for Heat Treatment, vol.27 No.5 pp.235~241, 2014
- Effect of Cold Working on Tensile and Charpy Impact Properties of a High-Nitrogen Fe-18Mn-18Cr-0.61N Austenitic Steel, J. of the Korean Society for Heat Treatment, vol.27 No.3 pp.121~126, 2014
- An approach to triangular induction heating in final precision forming of thick steel plates, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, vol.214 No.4 pp.1008~1017, 2014
- Effect of Cold Working on Mechanical Properties of High-Nitrogen 18Mn-18Cr Austenitic Steels, KOREAN JOURNAL OF METALS AND MATERIALS, vol.52 No.1 pp.21~29, 2014
- Effect of Interstitial Elements on Ductile-Brittle Transition Behavior of Austenitic Fe-18Cr-10Mn-2Ni Alloys, Kor J Mater Res, vol.23 No.11 pp.649~654, 2013
- Influence of Mo and Cr Contents on Hardenability of Low-Carbon Boron Steels, Kor J Mater Res, vol.23 No.10 pp.555~561, 2013
- Prediction of Tensile Strength of High-Nitrogen 18Mn-18Cr Austenitic Steels for Generator Retaining Ring, Kor J Mater Res, vol.23 No.9 pp.483~488, 2013
- Continuous cooling transformation, microstructure and mechanical properties of high-strength low-alloy steels containing B and Cu, Kor J Mater Res, vol.23 No.9 pp.525~530, 2013
- Effects of C, Mo and Cr on Hardenability and Mechanical Properties of Boron-Bearing Steels, J. of the Korean Society for Heat Treatment, vol.26 No.5 pp.241~247, 2013
- Microstructure and Mechanical Properties of High-Strength Low-Carbon Bainitic Steels with Enhanced Deformability, Kor J Mater Res, vol.23 No.8 pp.423~429, 2013
- Scale-Bridging Analysis on Deformation Behavior of High-Nitrogen Austenitic Steels, MICROSCOPY AND MICROANALYSIS, vol.19 No.S5 pp.77~82, 2013
- Influence of Cu and Ni on ductile-brittle transition behavior of metastable austenitic Fe-18Cr-10Mn-N alloys, Kor J Mater Res, vol.23 No.7 pp.385~391, 2013
- Tensile Deformation Behavior and Phase Transformation in the Weld Coarse-Grained Heat-Affected Zone of Metastable High-Nitrogen Fe-18Cr-10Mn-N Stainless Steel, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, vol.44A No.7 pp.3069~3076, 2013
- Microstructure and tensile behavior of duplex low-density steel containing 5 mass% aluminum, SCRIPTA MATERIALIA, vol.68 No.6 pp.365~369, 2013
- Effects of Cooling Conditions on Microstructure, Tensile Properties, and Charpy Impact Toughness of Low-Carbon High-Strength Bainitic Steels, METALLURGICAL AND MATERIALS TRANSACTIONS A, vol.44A No.1 pp.294~302, 2013
- Effect of Carbon Fraction on Stacking Fault Energy of Austenitic Stainless Steels, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, vol.43A No.12 pp.4455~4459, 2012
- Effects of B and Cu Addition and Cooling Rate on Microstructure and Mechanical Properties in Low-Carbon, High-Strength Bainitic Steels, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, vol.43A No.10 pp.3703~3714, 2012
- In situ and ex situ neutron diffraction study on deformation behavior of high-nitrogen, Ni-free duplex stainless steel, SCRIPTA MATERIALIA, vol.67 No.2 pp.141~144, 2012
- Isothermal Decomposition of Ferrite in a High-Nitrogen, Nickel-Free Duplex Stainless Steel, METALLURGICAL AND MATERIALS TRANSACTIONS A, vol.43A No.3 pp.822~832, 2012
- Ductile-to-brittle transition behavior of high-interstitial Fe-Cr-Mn alloys, PHILOSOPHICAL MAGAZINE LETTERS, vol.92 No.2 pp.93~102, 2012
- Grain size dependence of ductile-to-brittle transition temperature of a high-nitrogen Cr-Mn austenitic steel, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, vol.531 pp.182~185, 2012
- Effects of carbon equivalent and cooling rate on tensile and Charpy impact properties of high-strength bainitic steels, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, vol.530 pp.530~538, 2011
- Correlation of austenite stability and ductile-to-brittle transition behavior of high-nitrogen 18Cr-10Mn austenitic steels, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, vol.528 No.24 pp.7257~7266, 2011
- Effects of Rolling and Cooling Conditions on Microstructure and Tensile and Charpy Impact Properties of Ultra-Low-Carbon High-Strength Bainitic Steels, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, vol.42A No.7 pp.1827~1835, 2011
- Quasi-static and Dynamic Compressive Behaviors of Medium-Carbon Steels in a Wide Temperature Range, Quasi-static and Dynamic Compressive Behaviors of Medium-Carbon Steels in a Wide Temperature Range, 2011
- Effect of alloying elements on ductile-to-brittle transition behavior of high-interstitial-alloyed 18Cr-10Mn austenitic steels, Procedia Engineering, 2011
- Austenitizing temperature and hardenability of low-carbon boron steels, SCRIPTA MATERIALIA, vol.64 No.12 pp.1118~1120, 2011
- Low-Temperature Toughening Mechanism in Thermo-Mechanically Processed High-Strength Low-Alloy Steels, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2011
- Variation of microstructures and mechanical properties in the post-weld heat-treated HAZ of Cu containing HSLA steel welds, Metals and Materials International, vol.17 No.1 pp.137~142, 2011
- Effects of deformation-induced martensite and grain size on ductile-to-brittle transition behavior of austenitic 18Cr-10Mn-N stainless steels, Metals and Materials International, vol.16 No.6 pp.905~911, 2010
- Effects of Alloying Elements and the Cooling Condition on the Microstructure, Tensile Properties, and Charpy Impact Properties of High-Strength Bainitic Steels, 대한금속·재료학회지, vol.48 No.9 pp.798~806, 2010
- Tensile and Charpy Impact Properties of High-Strength Bainitic Steels Fabricated by Controlled Rolling Process, 대한금속·재료학회지, vol.48 No.7 pp.615~624, 2010
- Influence of thermomechanical processing and heat treatments on tensile and Charpy impact properties of B and Cu bearing high-strength low-alloy steels, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, vol.527 No.16-17 pp.4341~4346, 2010
- Ductile-to-Brittle Transition Behavior of High-Nitrogen 18Cr-10Mn-0.35N Austenitic Steels Containing Ni and Cu, Materials Science Forum, 2010
- Correlation of Microstructure and Mechanical Properties of Thermo-mechanically Processed Low-Carbon Steels Containing Boron and Copper, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2010
- Microstructure and Mechanical Properties of Ultra-High Strength Steel Plates with High Deformability, Materials Science Forum, 2010
- Effect of Cu and B Addition on Microstructure and Mechanical Properties of High-Strength Bainitic Steels, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROST, 2009
- High-temperature dynamic compressive properties of two monolithic Zr-based amorphous alloys, JOURNAL OF ALLOYS AND COMPOUNDS, vol.478 No.1-2 pp.831~835, 2009
- Fracture Toughness Analysis in Transition-Temperature Region of Three API X70 and X80 Pipeline Steels, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2009
- Dynamic deformation and fracture behavior of ultra-fine-grained pure copper fabricated by equal channel angular pressing, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, vol.504 No.1-2 pp.163~168, 2009
- Effect of Molybdenum and Chromium on Hardenability of Low-Carbon Boron-Added Steels, METALS AND MATERIALS INTERNATIONAL, vol.14 pp.667~672, 2008
- Effect of Cu and B addition on tempering behavior in the weld CGHAZ of high strength low alloy plate steel, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, vol.497 No.1-2 pp.153~159, 2008
- Dynamic Deformation Behavior of Ultra-Fine-Grained Pure Coppers Fabricated by Equal Channel Angular Pressing, 대한금속·재료학회지, vol.46 No.9 pp.545~553, 2008
- Effect of Effective Grain Size on Charpy Impact Properties of High-Strength Bainitic Steels, 대한금속·재료학회지, vol.46 No.10 pp.617~626, 2008
- Effect of microstructure on drop weight tear properties and inverse fracture occurring in hammer impacted region of high toughness X70 pipeline steels, MATERIALS SCIENCE AND TECHNOLOGY, vol.24 pp.945~956, 2008
- Dynamic deformation and fracture behavior of ultra-fine-grained dual phase steels fabricated by equal channel angular pressing, INTERNATIONAL JOURNAL OF MODERN PHYSICS B, vol.22 No.9-11 pp.1159~1164, 2008
- Effects of temperature and composition on dynamic deformation behavior of Zr-based amorphous alloys, INTERNATIONAL JOURNAL OF MODERN PHYSICS B, vol.22 No.9-11 pp.1153~1158, 2008
- Effects of temperature on dynamic compressive properties of Zr-based amorphous alloy and composite, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, vol.472 No.1-2 pp.316~323, 2008
- Dynamic Torsional Deformation Behavior of Ultra-Fine-Grained Dual Phase Steel Fabricated by Equal Channel Angular Pressing, Metall. Mater. Trans. A - 직접입력, vol.38 No.12 pp.3007~3013, 2007
- Effects of Molybdenum and Vanadium Addition on Tensile and Charpy Impact Properties of API X70 Linepipe Steels, Metall. Mater. Trans. A - 직접입력, vol.38 No.8 pp.1731~1742, 2007
- Analysis of Fractue Toughness in Transition Temperature Region of APIX70 and X80 Linepipe Steels, 대한금속·재료학회지, vol.45 No.8 pp.447~457, 2007
- Correlation of Microstructure and Charpy Impact Properties in API X70 and X80 Line-pipe Steels, Mater. Sci. Eng. A - 직접입력, No.458 pp.281~289, 2007
- Dynamic Deformation and Fracture Behavior of Zr-Based Bulk Metallic Glasses, Key Engineering Materials - 직접입력, pp.629~632, 2007
- Zr계 벌크 비정질 합금과 복합재료의 고온 동적 압축변형성질, 대한금속·재료학회지, No.45 pp.148~156, 2007
- Effects of Notch Shape and Specimen Thickness on Drop Weight Tear Test Properties of API X70 and X80 Line-pipe Steels, Metall. Mater. Trans. A - 직접입력, vol.38 No.3 pp.537~551, 2007
- Microstructural development of adiabatic shear bands in ultra-fine-grained low-carbon steels fabricated by equal channel angular pressing, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, vol.441 pp.308~320, 2006
- Correlation of microstructure with hardness and wear resistance of stainless steel blend coatings fabricated by atmospheric plasma spraying, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, vol.429 pp.189~195, 2006
- Fracture toughness analysis in transition temperature region of API X70 pipeline steels, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, vol.429 pp.196~204, 2006
- Correlation of microstructure and wear resistance of Al2O3-TiO2 coatings plasma sprayed with nanopowders, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, vol.37A pp.1851~1861, 2006
- Correlation of crack-tip opening angle for stable crack propagation with charpy and drop-weight tear test properties in high-toughness API X70 pipeline steels, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, vol.37A pp.371~380, 2006
- Dynamic deformation and fracture behavior of ultrafine-grained aluminum alloy fabricates by equal-channel angular pressing, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, vol.36A pp.2947~2955, 2005
- Analysis and prevention of side cracking phenomenon occurring during hot rolling of thick low-carbon steel plates, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, vol.402 pp.177~187, 2005
- Effective grain size and charpy impact properties of high-toughness X70 pipeline steels, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, vol.36A pp.2107~2114, 2005
- Correlation of rolling condition, microstructure, and low-temperature toughness of X70 pipeline steels, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, vol.36A pp.1793~1805, 2005
- Improvement of wear resistance of plasma-sprayed molybdenum blend coatings, JOURNAL OF THERMAL SPRAY TECHNOLOGY, vol.14 pp.251~257, 2005
- Effects of blending elements on wear resistance of plasma-sprayed molybdenum blend coatings used for automotive synchronizer rings, SURFACE & COATINGS TECHNOLOGY, vol.194 pp.256~264, 2005
- Correlation of microstructure and fracture properties of API X70 pipeline steels, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, vol.36A pp.725~739, 2005
- Effects of microstructure on inverse fracture occurring during drop-weight tear testing of high-toughness X70 pipeline steels, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, vol.36A pp.371~387, 2005
- Dynamic deformation and fracture behavior of ultrafine-grained aluminum alloy fabricates by equal-channel angular pressing, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, vol.36A pp.2947~2955, 2005
- Effects of martensite morphology and tempering on dynamic deformation behavior of dual-phase steels, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, vol.35A pp.2371~2382, 2004
- Analysis of abnormal fracture occurring during drop-weight tear test of high-toughness line-pipe steel, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, vol.368 pp.18~27, 2004
- Correlation of microstructure and wear resistance of molybdenum blend coatings fabricated by atmospheric plasma spraying, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, vol.366 pp.152~163, 2004
- Analysis of fracture toughness in the transition-temperature region of an Mn-Mo-Ni low-alloy steel, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, vol.34A pp.1275~1281, 2003
- Effect of carbide distribution on the fracture toughness in the transition temperature region of an SA 508 steel, ACTA MATERIALIA, vol.50 pp.4755~4762, 2002
- Effect of oxides on wear resistance and surface roughness of ferrous coated layers fabricated by atmospheric plasma spraying, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, vol.335 pp.268~280, 2002
- Correlation of microstructure and wear resistance of ferrous coatings fabricated by atmospheric plasma spraying, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, vol.33 pp.2933~2945, 2002
Conference Papers
- S-H. Lee, Y-C. Yoon, S-G. Kim, B. Hwang, Influence of Al, Cu, and Ni Additions on Tensile and Impact Properties of Hot-rolled Fe-9Mn-0.2C Medium-Manganese Steels (MMnS), Proceeding of The 16th International Symposium on Novel and Nano Materials (ISNNM 2020), Jeju, Korea, 2020
- S. W. Ko, I. Yoo, H. Kim, J. Lee, B. Hwang, In-situ Observation of High-Temperature Fracture Behavior in Simulated HAZ of STS 347 Steel, Proceeding of The 16th International Symposium on Novel and Nano Materials (ISNNM 2020), Jeju, Korea, 2020
- S. I. Lee , S. H. Shin, B. Hwang, Artificial Neural Network for Modeling the Deformability in High-Strength API Linepipe Steels: Relative Importance of Phase Volume Fraction, Proceeding of The 16th International Symposium on Novel and Nano Materials (ISNNM 2020), Jeju, Korea, 2020
- S. H. Shin, S-G. Kim, B. Hwang, Artificial Neural Network of Tensile Properties in Dual-Phase Steels: Effects of Alloying Elements and Microstructural Factors, Proceeding of The 16th International Symposium on Novel and Nano Materials (ISNNM 2020), Jeju, Korea, 2020
- 신승혁, 김승규, 임휘강, 이준호, 원성빈, 황병철, 700MPa급 고강도 일반 및 내진 철근의 미세조직과 기계적 특성, Proceedings of 2020 Fall Conference of the Korean Institute of Metals and Materials, Virtual Conference(온라인), 2020
- 고석우, 유일, 박현우, 김한수, 이준호, 황병철, 용접 열처리에 따른 STS 347 강의 In-situ 고온 파괴 거동 관찰, Proceedings of 2020 Fall Conference of the Korean Institute of Metals and Materials, Virtual Conference(온라인), 2020
- 윤영철, 이상혁, 이상인, 황병철, 2상역 열처리된 Fe-9Mn-(Al, Cu, Ni)-0.2C 중망간강의 온도별 충격 특성, Proceedings of 2020 Fall Conference of the Korean Institute of Metals and Materials, Virtual Conference(온라인), 2020
- 윤영철, 김상규, 황병철, Microstructure and Mechanical Properties of Hot-rolled Fe-9.0Mn-0.2C Medium-manganese Steels Containing Al, Cu and Ni, Proceedings of 2020 Fall Conference of The Korean Society For Technology of Plasticity, 칼호텔, 제주도, 2020
- 고석우, 김재윤, 황병철, Effect of Nb addition and pre-strain on hydrogen embrittlement of plain carbon steel, Proceedings of 2020 Fall Conference of The Korean Society For Technology of Plasticity, 칼호텔, 제주도, 2020
- 고석우, 이지민, 황병철, Nb 첨가된 페라이트-펄라이트 강의 수소취성에 미치는 예비 변형의 영향, Proceedings of 2020 Spring Conference of the Korean Institute of Metals and Materials, Virtual Conference(온라인), 2020
- 윤영철, 이상인, 황병철, Effect of Heat Treatment on Impact Toughness of an Fe-6.5Mn-0.08C Medium-Manganese Steel, Proceedings of 2020 Spring Conference of The Korean Society For Technology of Plasticity, 휘닉스 평창, 평창, 2020
- 신승혁, 이상인, 황병철, Analysis of Deformability of High Strength API Linepipe Steels Using Artificial Neural Network Model, Analysis of Deformability of High Strength API Linepipe Steels Using Artificial Neural Network Model, 휘닉스 평창, 평창, 2020
- 이상인, 이승완, 윤영철, 황병철, Effect of Tempering on Impact Toughness of Intercritically Annealed Fe-6.5Mn-0.08C Medium-Manganese Steel, 2019년 대한금속·재료학회 추계학술대회 초록집, 대구컨벤션센터, 대구, 2019
- 이승완, 이상인, 홍태운, 한상호, 박경태, 황병철, 마르텐사이트가 포함된 소부경화강의 항복 및 시효 거동, 2019년 대한금속·재료학회 추계학술대회 초록집, 대구컨벤션센터, 대구, 2019
- 김재성, 홍태운, 원성빈, 이준호, 황병철, Fabrication of 600 MPa-Grade High Strength and Seismic Resistant Reinforced Steel Bar Using Pilot Plant, Proceeding of the 13th Steel Science Forum, 서울대학교, 서울, 2019
- 이상인, 이지민, 이승용, 김한진, 서진유, 심재혁, 백운봉, 남승훈, 이준호, 황병철, Effect of Hydrogen Charging Method on Hydrogen Embrittlement Susceptibility of Austenitic High-Manganese Steels, 제13회 철강과학포럼 초록집, 서울대학교, 서울, 2019
- 신승혁, 이승완, 이상인, 황병철, Effect of Ni and Cu on Microstructure and Mechanical Properties of Intercritically-Annealed Medium-Manganese Steels, Proceeding of the 13th Steel Science Forum, 서울대학교, 서울, 2019
- 홍태운, 김재성, 이상인, PL Narayana, NS Reddy, 박찬희, 황병철, 인공신경망을 이용한 미세조직기반 고강도 API 라인파이프강의 변형능 예측, 2019년 대한금속·재료학회 춘계학술대회 초록집, 창원 컨벤션센터, 창원, 2019
- 이지민, 고석우, 유일, 서진유, 황병철, 전기화학적 및 고압 열적 수소 주입에 따른 고온 강재의 수소 취화 민감도 비교, 2019년 대한금속·재료학회 춘계학술대회 초록집, 창원 컨벤션센터, 창원, 2019
- 이승완, 신승혁, 이상인, 황병철, 미세조직에 따른 API 라인파이프강의 인장 및 충격 특성 변화, 2019년 대한금속·재료학회 춘계학술대회 초록집, 창원 컨벤션센터, 창원, 2019
- 이상인, 이승완, 윤영철, 황병철, Effect of Heat Treatments on Microstructure and Mechanical Properties of a Fe-6.5Mn-0.08C Medium-Mn Steel, 2019년 대한금속·재료학회 춘계학술대회 초록집, 창원 컨벤션센터, 창원, 2019
- J-M. Lee, H-S. Lim, Y-B. Song, J-H. Ham, H-G. Kim, B. Hwang, Effect of isothermal holding temperature and time on the microstructure and mechanical properties of high-carbon nanostructured bainite steels, Proceeding of 6th International Conference on Advanced Steels, Ramada Plaza Jeju Hotel, Jeju, Korea, 2018
- S-I. Lee, H-G. Jung, B. Hwang, Effect of microstructure and strain aging on the deformability of high-strength API pipeline steels, Proceeding of 6th International Conference on Advanced Steels, Ramada Plaza Jeju Hotel, Jeju, Korea, 2018
- 고석우, 이지민, 이상인, 황병철, Microstructure and Mechanical Properties of High-Carbon Nanobainite Steels, Proceedings of 2018 Fall Conference of the Korean Powder Metallurgy Institute, 부산 해운대그랜드 호텔, 부산, 2018
- 김재성, 이승완, 이상인, 황병철, Tensile and Charpy Impact Properties of Lightweight High Manganese Steel for Cryogenic-Temperature, Proceedings of 2018 Fall Conference of the Korean Powder Metallurgy Institute, 부산 해운대그랜드 호텔, 부산, 2018
- 이지민, 이상인, 송영범, 함진희, 김홍규, 황병철, Microstructure and Mechanical Properties of High-Carbon Nano-Bainitic Steel with Austempering Temperature, Proceedings of 2018 Fall Conference of the Korean Institute of Metals and Materials, 대전컨벤션센터, 대전, 2018
- 홍태운, 이상인, 심재혁, 이준호, 이명규, 황병철, Effect of Microstructural Factors on Ferrite-Pearlite Steels of Deformability, Proceedings of 2018 Fall Conference of the Korean Institute of Metals and Materials, 대전컨벤션센터, 대전, 2018
- 이승완, 이상인, 황병철, Tensile and Charpy Impact Properties of Austenitic Lightweight FeMnAlC Alloy for Cryogenic Temperature, Proceedings of 2018 Fall Conference of the Korean Institute of Metals and Materials, 대전컨벤션센터, 대전, 2018
- 이상인, 이승완, 황병철, Effect of Intercritical Annealing Temperature on Microstructure and Tensile Properties in Fe-9Mn-3Al-1.5(Cu/Ni)-0.2C Medium-Mn Steels with Austenite-Ferrite Structure, Proceedings of 2018 Fall Conference of the Korean Institute of Metals and Materials, 대전컨벤션센터, 대전, 2018
- S-W. Lee, S-I. Lee, B. Hwang, Effect of Intercritical Annealing Conditions on Tensile Properties of Medium–Mn Steels Containing Cu or Nieding of The 16th Discussion Meeting on Thermodynamics of Alloys, Proceeding of The 16th Discussion Meeting on Thermodynamics of Alloys, Korea University, Seoul, Korea, 2018
- T-W. Hong, S-I. Lee, J-H. Shim, J-H. Lee, B. Hwang, Effect of Vanadium Content on the Yield-to-tensile Ratio and Uniform Elongation of Ferrite-pearlite Steels, Proceeding of The 16th Discussion Meeting on Thermodynamics of Alloys, Korea University, Seoul, Korea, 2018
- 이상인, 이지민, 송영범, 함진희, 김홍규, 황병철, Effect of Austempering on Microstructure and Mechanical Properties of a High-Carbon Bainitic Steel, Proceeding of the 32nd Conference on Advanced Structural Materials, 메이필드호텔, 서울, 2018
- 이승완, 임인혁, 김재성, 정환교, 황병철, Effect of Microstructure on the Tensile Behabior and Properties on the of API X80 Pipeline Steels Subjected to Strain Aging, Proceeding of the 12th Steel Science Forum, 베스트웨스턴 포항호텔, 포항, 2018
- 홍태운, 이상인, 고석우, 심재혁, 이준호, 황병철, Design of High-Deformability Ferrite-Pearlite Steels with Different Mn and V contents, Proceeding of the 12th Steel Science Forum, 베스트웨스턴 포항호텔, 포항, 2018
- 이지민, 이상인, 송영범, 함진희, 김홍규, 황병철, Effect of Isothermal Holding Temperature and Time on Microstructure and Mechanical Properties of High-Carbon Nanostructured Bainite Steel, Proceeding of the 12th Steel Science Forum, 베스트웨스턴 포항호텔, 포항, 2018
- 이상인, 정환교, 이창선, 황병철, Microstructure-based prediction of deformability of API linepipe steels using multiple linear regression analysis, Proceeding of the 12th Steel Science Forum, 베스트웨스턴 포항호텔, 포항, 2018
- B. Hwang, J.-M. Lee, S.-I. Lee, Y.-B. Song, J. Ham, H.-K Kim, Effect of Austempering Treatment of the Microstructure and Mechanical Properties of High-Carbon Bainite Steels, Proceeding of The 15th International Symposium on Novel and Nano Materials (ISNNM 2018), Tivoli Oriente Lisboa Hotel, Lisbon, Portugal, 2018
- 황병철, 이승용, 서유진, 백운봉, 남승훈, 수소 주입 및 시험 방법에 따른 고망간강의 수소 취화 특성 비교, Proceedings of 2018 Spring Conference of the Korean Institute of Metals and Materials, 제주국제컨벤션센터, 제주, 2018
- 이상인, 이석규, 이성학, 정환교, 황병철, Effect of Microstructural Factors and Strain Aging on High Deformability of API Linepipe Steels, Proceedings of 2018 Spring Conference of the Korean Institute of Metals and Materials, 제주국제컨벤션센터, 제주, 2018
- 이승완, 이상인, 임현석, 황병철, Effect of Aluminium and Carbon Contents on Impact Toughness Properties of Fe-23Mn-Al-C Alloy High Manganese Steel, Proceedings of 2018 Spring Conference of the Korean Institute of Metals and Materials, 제주국제컨벤션센터, 제주, 2018
- 이지민, 임현석, 송영범, 함진희, 김홍규, 황병철, Microstructure and Mechanical Properties of the High-Hardness Armor Steels, Proceedings of 2018 Spring Conference of the Korean Institute of Metals and Materials, 제주국제컨벤션센터, 제주, 2018
- 홍태운, 이상인, 김보성, 이준호, 황병철, Microstructure and Tensile Properties of 700 MPa-Grade High-Strength and Seismic Resistant Reinforcing Steels, Proceedings of 2018 Spring Conference of the Korean Institute of Metals and Materials, 제주국제컨벤션센터, 제주, 2018
- B. Hwang, S-Y. Lee, S-I. Lee, Strain Rate Dependence of Tensile and Serration Behaviors of an Austenitic Fe-22Mn-0.7C Twinning-induced Plasticity Steel, TMS 2018 Annual Meeting and Exhibition, Phoenix Convention Center, Phoenix, Arizona, USA, 2018
- Byoungchul Hwang, Sang-In Lee, Tae-Woon Hong, Microstructure and Mechanical Properties of High-Strength Seismic Resistant Reinforcing Steel Bars, 3rd International Conference on Composite Materials and Material Engineering (ICCMME2018), Singapore, 2018
- S-W. Lee, S-I. Lee, B. Hwang, Effect of microstructure on tensile and strain aging properties of API X60, X70 and X80 linepipe steels, Proceeding of ISIMP, Jeju, Korea, 2017
- S-I. Lee, S-Y. Lee, B. Hwang, "Dynamic Strain Aging and Tensile Behaviors of an Austenitic Fe-22Mn-0.7C High-Manganese Steel ", Proceeding of ISIMP, Jeju, Korea, 2017
- 홍태운, 이상인, 황병철, Effects of carbon content and phase fraction on strain aging properties of bake hardening steels, Proceedings of 2017 Fall Conference of the Korean Institute of Metals and Materials, 대구 EXCO, 대구, 2017
- 이상인, 홍태운, 유선아, 이준호, 황병철, Effect of Microstructural Factors on Yield Ratio of Ferrite-Pearlite Steels using Constitutive Equations, Proceedings of 2017 Fall Conference of the Korean Institute of Metals and Materials, 대구 EXCO, 대구, 2017
- S-I. Lee, H-G. Jung, B. Hwang, Effect of Polygonal Ferrite on the Strain Aging Properties of API X65API peline Steels, Proceedings of AWMFT2017, Pohang, Korea, 2017
- 임현석, 송영범, 심인옥, 홍성석, 김홍규, 황병철, Effect of tempering temperature on microstructure and mechanical properties of ARMOX 500T armor materials, 2017 General Conference The Korea Institute of Miliatry Science and Technology, of ARMOX 500T armor ma제주도 국제컨벤션센터, 2017
- 백한솔, 임현석, 이승용, 황병철, Effect of surface condition influencing tensile property of high temperature-high hydrogen charged high-Mn steels, Proceedings of 2017 Spring Conference of The Korean Society For Technology of Plasticity, 청풍리조트, 제천, 2017
- 서하늘, 이상인, 홍태운, Microstructure and Tensile Properties of High Two 600 MPa Grade Strength Reinforcing steel, Proceedings of 2017 Spring Conference of The Korean Society For Technology of Plasticity, 청풍리조트, 제천, 2017
- 이승용, 임현석, 이상인, 황병철, Influence of Strain Rate on Tensile Properties and Dynamic Strain Aging of an High-Mn Alloy, Proceedings of 2017 Spring Conference of the Korean Institute of Metals and Materials, 창원컨벤션센터, 창원, 2017
- 이상인, 정환교, 이창선, 황병철, Correlation of Microstructural Factors and Strain-Aging Properties of Stain-Based API Linepipe Steels, Proceedings of 2017 Spring Conference of the Korean Institute of Metals and Materials, 창원컨벤션센터, 창원, 2017
- 임현석, 이승용, 이상혁, 황병철, Effect of tempering temperature on microstructure and mechanical properties of high performance bulletproof materials ARMOX 500T, Proceedings of 2017 Spring Conference of the Korean Institute of Metals and Materials, 창원컨벤션센터, 창원, 2017
- S. Y. Lee, H. J. Kim, J. Lee, J. Y. Seo, B. Hwang, High pressure hydrogen embrittlement of Fe-30Mn-0.2C-(1.5Al) High-Mn steel, Proceedings of 2017 TMS, San Diego, California, 2017
- B. Hwang, S. I. Lee, S. Y. Lee, H. G. Jung, Microstructure-based Modeling of Tensile Properties in High-strength Pipeline Steels, Proceedings of 2017 TMS, San Diego, California, 2017
- S. I. Lee , H. S. Lim, B. Hwang, Effect of Austenite Grain Size on Deformed Microstructure and Tensile Properties of Austenitic Fe-24.55Mn-4Cr-0.45C Alloy, Proceedings of 2017 TMS, San Diego, California, 2017
- 서하늘, 이승용, 황병철, 정준호, 김보성, 원성빈, Microstructure analysis and hardness property of commercial high strength selsmic resistant steel bar, Proceedings of 2016 Fall Conference of the Korean Institute of Metals and Materials, 현대호텔, 경주, 2016
- 이승완, 이상인, 박경태, 한상호, 황병철, Strain aging and yield behavior of dual phase bake hardening steel, Proceedings of 2016 Fall Conference of Materials Research Society of Korea, 현대호텔, 경주, 2016
- 이지민, 이상인, 황병철, Effect of transformation temperature on tensile properties of low-carbon steels with micro-alloying elements, Proceedings of 2016 Fall Conference of Materials Research Society of Korea, 현대호텔, 경주, 2016
- 김지연,임현석,황병철, Tensile properties of micro-alloyed dual phase steels, Proceedings of 2016 Fall Conference of Materials Research Society of Korea, 현대호텔, 경주, 2016
- 조윤, 이상인, 정환교, 이창선, 황병철, Effect of microstructure on the tensile properties of API linepipe steels, Proceedings of 2016 Fall Conference of the Korean Institute of Metals and Materials, BEXCO, 부산, 2016
- 이승용, 김한진, 서진유, 심재혁, 이준호, 황병철, Hydrogen embrittlement of Mn-containing austenitic alloys, Proceedings of 2016 Fall Conference of the Korean Institute of Metals and Materials, BEXCO, 부산, 2016
- 이상인, 황병철, Grain Size Effect on Deformation Behavior and Tensile Properties of an Austenitic Fe-Mn-Cr-C alloy, Proceedings of 2016 Fall Conference of the Korean Institute of Metals and Materials, BEXCO, 부산, 2016
- Byoungchul Hwang, Ductile-to-Brittle Transition Behavior of Austenitic Fe-18Cr-10Mn-(N,C) Steels, Proceedings of 8th China-Korea Joint Symposium on Advanced Steel Technology, Hanwen Hotel, Chongqing, China, 2016
- 이상인, 조윤, 김지연, 정환교, 황병철, The study of tensile properties prediction in API steels with high deformability based on microstructural factors, Proceeding of the 10th Steel Science Forum, 소노펠리체, 강원도, 2016
- 임현석, 이승용, 서하늘, 이재승, 유장용, 황병철, Effect of microalloying elements on recrystallization behavior of carbon steels at different process parameters, Proceeding of the 10th Steel Science Forum, 소노펠리체, 강원도, 2016
- 이승용, 김한진, 서진유, 백운봉, 남승훈, 이준호, 황병철, Hydrogen Embrittlement of High-Manganese Steels under High-Pressure Gaseous Hydrogen, Proceeding of 2016 Spring Conference of the Korean Institute of GAS, 호텔인터불고, 대구, 2016
- 임현석, 이승용, 김한진, 서진유, 황병철, Hydrogen Embrittlement Behavior of High-Mn Steels with Varying Stacking Fault Energies, Proceedings of 2016 Spring Conference of the Korean Hydrogen & New Energy Society, 연세대학교, 서울, 2016
- 조윤, 김지연, 이승용, 황병철, Effect of microalloying elements on the impact toughness of hypoeutectoid steels with ferrite-pearlite microstructure, Proceedings of 2016 Spring Conference of the Korean Institute of Metals and Materials, 경주 화백컨벤션센터, 경주, 2016
- 황병철, 임현석, 유일, 수소환원 제철용 공정소재의 선정 기준 도출 연구, Proceedings of 2016 Spring Conference of the Korean Institute of Metals and Materials, 경주 화백컨벤션센터, 경주, 2016
- 이상인, 이승용, 이재승, 유장용, 황병철, Effect of strain rate on recrystallization behavior of micro-alloyed low carbon steels, Proceedings of 2016 Spring Conference of the Korean Institute of Metals and Materials, 경주 화백컨벤션센터, 경주, 2016
- 이승용,이승완,김한진,서진유,황병철, Hydrogen environment embrittlement of high-Mn steels with different stacking fault energy, Proceedings of 2016 Spring Conference of the Korean Institute of Metals and Materials, 경주 화백컨벤션센터, 경주, 2016
- S.Y. Lee, S.I. Lee, B. Hwang, Effect of Strain Rate and Grain Size on Room-Temperature Tensile Properties of a High-Mn Steel for Cryogenic Applications, Proceeding of 171th ISIJ Meeting, Tokyo, Japan, 2016
- H.S. Lim, B. Hwang, Effect of W and Nb Addition on the Hardenability of Low-Carbon Boron Steels, Proceedings of 171th ISIJ Meeting, Tokyo, Japan, 2016
- 황병철, 보론 첨가강의 경화능에 미치는 합금원소와 열처리의 영향, Proceedings of 2015 Fall Conference of The Korean Society for Heat Treatment, 한국산업기술대학교, 2015
- 이승용, 이창길, 황병철, Effect of Cu and B on effective grain size and low-temperature toughness of thermo-mechanically processed high-strength banitic steels, Proceedings of 2015 Fall Conference of The Korean Society for Heat Treatment, 한국산업기술대학교, 2015
- 이상인, 이태호, 황병철, Effect of tempering temperature on microstructure and mechanical properties of Cu-bearing high-strength steels, Proceedings of 2015 Fall Conference of The Korean Society for Heat Treatment, 한국산업기술대학교, 2015
- 이상인, 이승완, 황병철, Effect of grain size on tensile properties of high Mn steel for cryogenic, Proceedings of 2015 Fall Conference of the Korean Institute of Metals and Materials, 대전컨벤션센터, 2015
- 이승용, 오선근, 황병철, Room-temperature tensile properties of a high-Mn steel for cryogenic applications under Quasi-static strain rates, Proceedings of 2015 Fall Conference of the Korean Institute of Metals and Materials, 대전컨벤션센터, 2015
- 임현석, 조윤, 황병철, Analysis of cracking phenomenon occurring during hot rolling of Fe-23Mn-(3.5-5)Al-(0.2-0.4)C steel, Proceedings of 2015 Fall Conference of the Korean Institute of Metals and Materials, 대전컨벤션센터, 2015
- 정상우, 강준영, 백운봉, 남승훈, 황병철, Hydrogen embrittlement of a high-Mn steel under high-pressure gaseous hydrogen environment, Proceedings of 2015 Fall Conference of the Korean Institute of Metals and Materials, 대전컨벤션센터, 2015
- 황병철, 에너지플랜트용 강재 저온인성 향상 및 파괴인성 평가 기술, Proceedings of 2015 Fall Conference of the Korean Institute of Metals and Materials, 대전컨벤션센터, 2015
- 이승용, 이상인, 이상윤, 유장용, 황병철, 페라이트-펄라이트 조직 아공석강의 충격인성에 미치는 미세조직적 인자의 민감도 분석, Proceedings of 2015 Fall Conference of the Korean Institute of Metals and Materials, 대전컨벤션센터, 2015
- B. Hwang, Effect of Nitrogen and Carbon on Ductile-Brittle Transition Behavior of Austenitic Fe-18Cr-10Mn Alloys, Proceedings of 2015 International Conference for Top and Emerging Materials Scientists, Lijiang, 2015
- 이승용, 정상우, 백승욱, 이해무, 백운봉, 남승훈, 황병철, Tensile properties of high manganese steel in the high pressure hydrogen environment, Proceedings of 2015 Spring Conference of the Korean Hydrogen & New Energy Society, 한국과학기술연구원 국제협력관, 2015
- 이승용, 김보영, 남승훈, 이순기, 황병철, Low-temperature impact properties and room-temperature tensile properties under high-pressure hydrogen of high-Mn steel for cryogenic application, Proceedings of 2015 Spring Conference of the Korean Institute of Metals and Materials, 창원컨벤션센터, 2015
- 임현석, 서동우, 김성준, 황병철, Influence of Mo and Cr contents on hardenability of low-carbon boron steels, Proceedings of 2015 Spring Conference of the Korean Institute of Metals and Materials, 창원컨벤션센터, 2015
- 이상인, 강준영, 오선근, 이상윤, 이재승, 유장용, 황병철, Effect of interlamellar spacing on impact toughness and ductile-brittle transition temperature of low-carbon steels, Proceedings of 2015 Spring Conference of the Korean Institute of Metals and Materials, 창원컨벤션센터, 2015
- 성효경, 이동호, 이성학, 김형섭, 신상용, 노윤조, 이창선, 황병철, Correlation between microstructure and tensile properties of strain-based API X60 linepipe steels, Proceedings of the 28th Conference on Advanced Structural Materials, 경주 코모도 호텔, 2014
- 이승용, 백승욱, 이해무, 백운봉, 남승훈, 황병철, Mechanical properties of metallic materials for cryogenic applications, Proceedings of 2014 Fall Conference of the Korean Hydrogen & New Energy Society, 포스코 국제관, 2014
- 황병철, 이승용, 백승욱, 이해무, 남승훈, Characteristics of low-temperature brittle fracture and metallic materials for cryogenic applications, Proceedings of 2014 Fall Conference of the Korean Institute of Metals and Materials, 강원랜드 컨벤션센터, 2014
- 송혜진, 성효경, 이동호, 신상용, 이병주, 이성학, 홍승표, 김영운, 유장용, 황병철, Effect of finish cooling temperature on tensile and impact properties of high-strength bainitic steels containing Nb, V and B, Proceedings of 2014 Fall Conference of the Korean Institute of Metals and Materials, 강원랜드 컨벤션센터, 2014
- 이상인, 이승용, 이상윤, 황병철, Effect of microstructural factors on impact toughness of low-carbon steels, Proceedings of 2014 Fall Conference of the Korean Institute of Metals and Materials, 강원랜드 컨벤션센터, 2014
- 황병철, Basic understanding of hydrogen embrittlement, Proceedings of 2014 Spring Conference of the Korean Institute of Metals and Materials, EXCO 대구, 2014
- K. Wu, C-Y. Choi, J-H. Lee, B. Hwang, D-P. Hong, J-W. Byeon, In-Situ Acoustic Emission Monitoring of Corrosion Damage of Stainless Steel, Proceedings of the15Th. International Symposium on Eco-materials Processing and Design, Hanoi university of science and technology, 2014
- 신상용, 성효경, 이동호, 이성학, 노윤조, 이창선, 황병철, Effect of Finish cooling temperature on strain aging phenomenon of an API X60 linepipe steel with high deformability, Proceedings of the 27th Conference on Advanced Structural Materials, 부산 BEXCO, 2013
- 황병철, Understanding and evaluation method on the brittle fracture of structural materials, Proceedings of 2013 Fall Conference of Materials Research Society of Korea, 제주롯데호텔, 2013
- 정우연, 임현석, 황병철, Microstructure and wear resistance of ferrous and ferrous blend coatings febricated by atmospheric plasma spraying, Proceedings of 2013 Fall Conference of the Korean Powder Metallurgy Institute, 해운대그랜드호텔, 2013
- 정우연, 이승용, 황병철, Wear properites of coatings plasma sprayed with molybdenum blend powders, Proceedings of 2013 Fall Conference of the Korean Powder Metallurgy Institute, 해운대그랜드호텔, 2013
- 임현석, 정우연, 서동우, 김성준, 황병철, Effect of Mo and Cr addition on hardenability and mechanical properties of boron steels, Proceedings of 2013 Fall Conference of the Korean Institute of Metals and Materials, 김대중컨벤션센터, 2013
- 이승용, 권오현, 하헌영, 이태호, 황병철, Effect of austenite stability on ductile-brittle transition behavior of austenitic Fe-Cr-Mn-N alloys, Proceedings of 2013 Fall Conference of the Korean Institute of Metals and Materials, 김대중컨벤션센터, 2013
- 황병철, Microstructure and mechanical properties of high-strength low-carbon bainitic steels by strain-based design, Proceedings of 2013 Fall Conference of the Korean Institute of Metals and Materials, 김대중컨벤션센터, 2013
- 황병철, Understanding the brittle fracture phenomena in metallic materials, Proceedings of 2013 Spring Conference of the Korean Institute of Metals and Materials, 제주국제컨벤션센터, 2013
- 이태호, 하헌영, 강전연, 황병철, 김성준, Strain-induced Martensitic Transformation vs Deformation Twinning, Proceedings of 2013 Spring Conference of the Korean Institute of Metals and Materials, 제주국제컨벤션센터, 2013
- 황병철, 이태호, 하헌영, 문준오, 신종호, 이종욱, Fabrication and mechanical properties of 18Mn-18Cr-N high-nitrogen austenitic steel for generator, Proceedings of 2013 Spring Conference of the Korean Institute of Metals and Materials, 제주국제컨벤션센터, 2013
- 윤영섭, 하헌영, 황병철, 이태호, 김상식, A study on stress corrsion cracking of Fe-Cr-Mn based alloys, Proceedings of 2013 Spring Conference of the Korean Institute of Metals and Materials, 제주국제컨벤션센터, 2013
- 신선경, 황병철, 박성준, 조경목, Effect of constitutional phases on tensile properties of low-density steels, Proceedings of 2013 Spring Conference of the Korean Institute of Metals and Materials, 제주국제컨벤션센터, 2013
- Influence of Processing Conditions on the Mechanical Properties of High-Nitrogen 18Cr-18Mn Austenitic Steels for Generator Retaining Ring, Orlando, FL, 2012
- Effect of Alloying Elements on Ductile-to-Brittle Transition Behavior of High-Interstitial-Alloyed 18Cr-10Mn Austenitic Steels, Milano, Italy, 2011
- Ductile-to-Brittle Transition Behavior of High-Nitrogen 18Cr-10Mn-0.35N Austenitic Steels Containing Ni and Cu, Cairns, Australia, 2010
- Ductile-to-Brittle Transition Behavior of High-Nitrogen Austenitic Stainless Steels, Fukuoka, Japan, 2010
- Microstructure and Mechanical Properties of Ultra-High Strength Steel Plates with High Deformability, Berlin, Germany, 2009
- Influence of Copper and Boron on Microstructure and Mechanical Properties of Ultra-High Strength Steel Plates with Lean Chemistry, Tokyo, Japan, 2009
- Effect of Alloying Elements and Austenitizing Temperature on Hardenability of Low-Carbon Boron-Added Steels, Pittsburgh, Pennsylvania, 2008
- Dynamic Torsional Deformation of Ultra-Fine-Grained Dual Phase Steel Fabricated by Equal Channel Angular Pressing, Orlando, Florida, 2007
- Effects of Specimen Thickness and Notch Shape on Drop Weight Tear Test and Charpy Impact Test Properties of API X70 and X80 Line-Pipe Steels, Orlando, Florida, 2007
- Dynamic Compressive Deformation Behavior of Zr-Based Amorphous Alloy and Composite, , Orlando, Florida, 2007
수상
- MMI - Springer Award, MMI - Springer Award, The Korean Institute of Metals and Materials, 2020
- Computer-aided alloy designs of grade 600 MPa reinforced steel bars for seismic safety based on thermodynamic and kinetic calculations: Overview, Best Paper Award, CALPHAD, 2019
- Metals and Materials International, 굿리뷰어상, 대한금속재료학회, 2019
- Good Reviewer for Metals and Materials International, Good Reviewer Award - Metals and Materials International, The Korean Institute of Metals and Materials, 2018
- 페라이트-펄라이트 조직강의 변형능에 미치는 미세조직 인자의 영향, 학생구두발표 우수상, 대한금속재료학회, 2018
- Good Review for Metals and Materials International, Good Reviewer Award - Metals and Materials International, The Korean Institute of Metals and Materials, 2017
- Good Review for Korean Journal of Metals and Materials, Good Reviewer Award for Korean Journal of Metals and Materials, The Korean Institute of Metals and Materials, 2017
- Effect of Microstructural Factors on Impact Toughness of Low-Carbon Steels, Best Presentation Award, The Korean Powder Metallugy Institute, 2017
- 우수한 논문으로 재료과학과 공학분야에 기여, Paper Award, Materials Research Society of Korea, 2017
- Correlation of Microstructural Factors and Strain-Aging Properties of Stain-Based API Linepipe Steel, 학생구두발표 우수상, The Korean Institute of Metals and Materials, 2017
- 2상 조직을 갖는 소부 경화강의 항복 거동과 변형 시효 특성, 우수 발표 논문상, Materials Research Society of Korea, 2016
- 변형 시효에 따른 API 라인파이프강의 인장 특성에 미치는 미세조직의 영향, Best Poster Award, The Korean Institute of Metals and Materials, 2016
- 본인의 논문이 열처리공학회 발전과 위상 제고에 기여한 공적, 권숙인 논문상, 한국열처리공학회, 2015
- Effect of pearlite lamellar spacing on impact toughness and DBTT of low-carbon steels, Best Poster Award, The Korean Institute of Metals and Materials, 2015
- 대한금속재료학회지 논문 우수 심사위원, Good Reviewer Award (The Korean Journal of Metals and Materials), The Korean Institute of Metals and Materials, 2014
- Metals and Materials International 논문 우수 심사위원, Good Reviewer Award (Metals and Materials International), The Korean Institute of Metals and Materials, 2014
- 우수한 논문으로 재료과학과 공학분야에서 기여, Young Best Paper Award, Materials Research Society of Korea, 2014
- Effect of Microstructural Factors on Impact Toughness of Low-Carbon Steels, Best Poster Award, The Korean Institute of Metals and Materials, 2014
- Effect of Austenite Stability on the Ductile-Brittle Transition Behavior of Austenitic Alloys, Best Poster Award, The Korean Institute of Metals and Materials, 2013
Miscellaneous
- Service
ASIA STEEL 2021, Technical Committee, 2021
Metallurgical and Materials Transactions B, Editorial board, 2020~Present
12th Asian Workshop on Micro/Nano Forming Technology, Organizing Committee, 2018
6th International Conference on Advanced Steels (ICAS 2018), Local Organizing Committee, 2018
Korean Powder Metallurgy Institute, Member of Board of Directors, 2018-Present
The Korean Institute of Metals and Materials, Mechanical Behavior Subcommittee, Secretary General, 2018
Korean Agency for Technology and Standards, Expert Member (ISO TC164), 2017-Present
The Korean Society for Technology of Plasticity, Member of Board of Directors, 2017-Present
Korean Journal of Metals and Materials, Member of Editorial Board, 2015-present
The Korean Institute of Metals and Materials, Member of Academic Committee, 2014-present
Korean Iron and Steel Association, Expert Member (ISO TC17), 2014-Present
Metals and Materials International, Member of Editorial Board, 2013-present
The Korean Society for Heat Treatment, Member, 2013-present
Korea Science Foundation, Science Ambassador Candidate, 2004-2013
The Global Network of Korean Scientists & Engineers (KOSEN), Expert Member, 2006-2013
The Minerals, Metals & Materials Society (TMS), Member, 2007-Present
The Iron and Steel Institute of Japan (ISIJ), Member, 2007-Present
The International Society of Offshore and Polar Engineers (ISOPE), Member, 2003-Present
The Korean Institute of Metals and Materials, Member, 1999-Present


- Honors and Awards
Springer Award, Metals and Materials International, 2020
Best Paper Award, CALPHAD, 2019
Good Reviewer Award, Metals and Materials International, 2019
Best Paper Award, Materials Research Society of Korea, 2017
Good Reviewer Award, Metals and Materials International, 2017
Best Paper Award, The Korean Society for Heat Treatment, 2015
Good Reviewer Award, Korean Journal of Metals and Materials, 2015
Young Scientist Award, Materials Research Society of Korea, 2014
Young Scientist Award, The Korean Institute of Metals and Materials, 2010
Who’s Who in the World (Marquis Who’s Who, 25th Edition), 2008
Vanadium Award, The Institute of Materials, Minerals and Mining (IOM3), UK, 2007