Name Sang Hoon Lee
Position professor
Tel +82-2-970-6433
Fax +82-2-979-7032
E-mail hyla@seoultech.ac.kr
Biography
• Ph. D., Dept. Mechanical Engineering, Pohang University of Science and Technology(POSTECH)
Careers
• Researcher, Dept. Mechanical Engineering, POSTECH(2006.3 - 2008.2)
Research Areas
• Micro sensors for automotive applications: pressure sensor and flowmeter, and others
• M/NEMS related device: AFM probe, micro-gripper, and other related topics
• M/NEMS fabrication proces: FIB deposition, ZnO deposition, PZT etching, and other topics
Teaching
• Introduction to electrical and electronic engineering, Engineering mathematics, Automotive manufacturing processes, Special topics in Vehicle MEMS
Selected Publications
• Dae K. Choi, Sang H. Lee, "Deposition Property Investigation of Focused Ion Beam for High-Aspect-Ratio Metal Tip," Microsystem technologies, Vol. 19, pp. 363-370, 2013
• Dae K. Choi, Sang H. Lee, "Design and fabrication of a novel flowmeter with corrugated structure," Microelectronic Engineering, Vol. 98, pp. 477-482, 2012
• Sang H. Lee, Geunbae Lim, Wonkyu Moon, Hyunjung Shin, and Cheong-Wol Kim, "V-Shaped Metal-Oxide- Semiconductor Transistor Probe with Nano Tip for Surface Electric Properties," Ultramicroscopy, Vol. 108, pp. 1094-1100, 2008
• Sang H. Lee, Hyun-Wook Kang, Dong-Woo Cho, and Wonkyu Moon, "Study on the method for the reliability test of focused ion beam," Microsystem Technologies, Vol. 13, No. 5-6, pp. 569-577, 2007
• Sang H. Lee, Seung S. Lee, J.-J Choi, Jong U. Jeon, and K. Ro, "Fabrication of a ZnO piezoelectric micro cantilever with a high-aspect-ratio nano tip," Microsystem Technologies, Vol. 11, No. 6, pp. 416-423, 2005


• 김만재, 이우신, 정종훈, 이상훈, "운송용 트럭에 대한 엔진오일의 전기 · 자기적 특성연구", 한국자동차공학회논문집, Vol. 22, No. 3, pp.166-170, 2014
• 최대근, 이상훈, "주름 구조를 이용한 저속 유속센서 개발," 한국센서학회지, Vol.20, No. 6, pp.393-399, 2011
Journal Papers
- Solution‑Processable, Ag‑Sandwiched Nanotube‑Coated ,Durable (SAND) Architecture Realizing Anti‑breaking Cyclic Heating on Arbitrary Substrates, International Journal of Precision Engineering and Manufacturing-Green Technology, 2021
- Tailored Nanopatterning by Controlled Continuous Nanoinscribing with Tunable Shape, Depth, and Dimension, ACS NANO, vol.13 No.10 pp.11194~11202, 2019
- Fabrication and evaluation of a drag-force type dual flow sensor with an embedded temperature sensor, MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS, vol.24 No.4 pp.1975~1985, 2018
- A scanning probe mounted on a field-effect transistor: Characterization of ion damage in Si, MICRON, vol.101 pp.197~205, 2017
- Measurement of the Engine Oil Deterioration of the Diesel Vehicle Using the Engine Oil Level Gauge, 한국자동차공학회 논문집, vol.25 No.1 pp.60~65, 2017
- Study on the Fabrication and Evaluation of the MEMS Based Curved Beam Air Flowmeter for the Vehicle Applications, Journal of Sensor Science and Technology, vol.25 No.2 pp.116~123, 2016
- A scanning microscopy technique based on capacitive coupling with a field-effect transistor integrated with the tip, ULTRAMICROSCOPY, vol.159 No.1 pp.1~10, 2015
- Fabrication and Evaluation of the SnO2 Based Gas Sensor for CO and NOx Detection, Transactions of KSAE, vol.23 No.5 pp.515~523, 2015
- Study on Electric and Magnetic Characteristics of Engine Oil in Transport Truck, Transactions of KSAE, vol.22 No.3 pp.166~170, 2014
- A Flowmeter with Piezoresistive Metal Layer Deposited with Focused-Ion-Beam System, INTEGRATED FERROELECTRICS, vol.157 No.1 pp.157~167, 2014
- Deposition property investigation of a focused ion beam for a high-aspect-ratio metal tip, MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS, vol.19 No.1 pp.363~370, 2013
- A Flowmeter with a Corrugation Structure and 2-Directional Measurement Application, INTEGRATED FERROELECTRICS, vol.142 No.1 pp.154~164, 2013
- Design and fabrication of a novel flowmeter with corrugated structure, MICROELECTRONIC ENGINEERING, vol.98 No.1 pp.477~482, 2012
- Air Flow Sensor with Corrugation Structure for Low Air Velocity Detection, 센서학회지, vol.20 No.6 pp.393~399, 2011
- Process and Strength Evaluation of Mechanical Press Joining, 한국안전학회지, vol.26 No.4 pp.1~6, 2011
- Estimation of Fatigue Damage Due to Rolling Contact ina Railway Wheel Using FEM Analysis, 한국안전학회지, vol.26 No.3 pp.1~7, 2011
- Design of Cold Heading Process of a Screw for Storage Parts, 소성가공, vol.20 No.1 pp.48~53, 2011
- Prediction of Wrinkling in Micro R2R Forming and Its Improvement, 소성가공, vol.20 No.1 pp.42~47, 2011
Conference Papers
- 윤지영, 신선애, 신예원, 이상훈, 미래지향적 인재 양성을 위한 AI 비교과 교육프로그램 운영 사례, 2021 공학교육학술대회 초록집, 라마다프라자 제주 호텔(온/오프라인 병행), 2021
- 윤지영, 김미진, 이상훈, Development and Management of Long-Term Extracurricular Program for Convergence design Program, KSME-ED 2021, 서울대학교 제 1공학관, 2021
- 오란거, 이상훈, Property Measurement of a Drag Force Type Air Flowmeter with respect to Polysilicon Doping Concentrations, Proceedings of KSPE 2021 Spring Conference, 온라인, 2021
- 오란거, 박혜민, 이상훈, Comparison of Characteristics of Air Flowmeters using the Platinum and the Polysilicon Piezoresistive Layers, Proceedings of KSPE 2020 Conference, 온라인, 2020
- 이상훈, 차주호, 김경주, 조형래, 정호윤, Design and Evaluation of a Drag-Force Type Flowmeter Enhanced with the Thermal Effect, Proceedings of KSPE 2019 Autumn Conference, 창원컨벤션센터, 2019
- Ju Ho Cha, Kyung Ju Kim, Yong U Lim, Sang Hoon Lee, Fabrication and Evaluation of a Drag-Force Type Flowmeter for Wide Range Measurement, PRESM 2019 Program & Proceedings, 베트남 다낭, 2019
- Dae Keun Choi, Jeanho Park, Nak-Kyu Lee, Sang Hoon Lee, A Study on the Air Flowmeter for the Vehicle Applications, Abstract book of IMCC 2017, Shenzhen, 2017
- 장영진, 김찬규, 이상훈, Study on the CO and NO2 Gas Sensing Properties of Co3O4 Based Gas Sensor, 2017 KSAE Annual Fall Conference, 여수 엑스포, 2017
- 조윤정, 신태호, 전재현, 이상훈, Measurement of the Engine Oil Deterioration of the Diesel Vehicle Using the Interdigitated Capacitor, 2017 KSAE Annual Fall Conference, 여수 엑스포, 2017
- 임용우, 이상훈, Design and Development of Drag Force Type Flowmeter for Vehicle Intake System, 2017 KSAE Annual Fall Conference, 여수 엑스포, 2017
- 김만재, 신태호, 이상훈, Development of engine oil deterioration monitoring sensor using the oil level gauge, 2016 KSAE Annual Fall Conference, 대구 EXCO, 2016
- 최대근, 박진호, 박석희, 이상훈, Experimental study on the effect of temperature with the flowmeter, KSMTE Annual Spring Conference 2016, 대전컨벤션센터, 2016
- 최대근, 김경식, 이상훈, Fabrication and evaluation of a drag force type flowmeter with a dual sensor, Proceedings of the 18th korean MEMS conference, 제주 칼 호텔, 2016
- 박철민, 최대근, 이상훈, Study on the Fabrication and Evaluation of the Curved Beam Air Flowmeter for the vehicle applications, KSAE 2015 Annual Conference and Exhibition, 경주화백컨벤션센터, 2015
- Cheol Min Park, Dae Keun Choi, Sang Hoon Lee, A Drag Force Type Air Flowmeter with the Corrugation Structure for Vehicle Applications, ICMDT 2015 proceedings, Okinawa, 2015
- Man Jae Kim, Jong Hoon Jung, Sang Hoon Lee, Study on the SnO2 based gas sensor for CO detection, 2014년 한국센서학회 종합학술대회 논문집, 강원대학교 삼척캠퍼스 공동실험실습관 4층, 2014
- Cheol Min Park, Sang Hoon Lee, Study on the curved beam air flowmeter with flat and corrugated structure, 2014년 한국센서학회 종합학술대회 논문집, 강원대학교 삼척캠퍼스 공동실험실습관 4층, 2014
- Cheol Min Park, Dae Keun Choi, Sang Hoon Lee, Study on the properties of corrugation structure for cantilever device applications, Proceeding of 40th international conference on Micro and Nano Engineering, STCC, Lausanne, Switzerland, 2014
- 김만재, 이우신, 정종훈, 이상훈, Study on Electric and Magnetic Characteristics of Engine Oil in Transport Truck, KSAE 2013 Annual Conference and Exhibition, KINTEX 제2전시장, 2013
- Dae Keun Choi, Sang Hoon Lee, A Flowmeter with Piezoresistive Metal Layer Deposited with Focused-Ion-Beam System, International Symposium on Integrated Functionalities 2013, Grapevine, Texas, USA, 2013
- 최대근, 이상훈, Fabrication and Evaluation of Flowmeter with Focused-ion-beam System, 2013 International Conference on Mechatronic Systems and Materials Application, ICMSMA 2013, Guangzhou, 2013
- 최대근, 이상훈, Fabrication and evaluation of flowmeter with FIB deposited piezoresistive layer, Proceedings of The 15th Korean MEMS Conference, 제주 KAL호텔, 2013
- 최대근, 이상훈, Evaluation of properties of FIB deposited metal layer and application to temperature sensing, 2012년 한국센서학회 종합학술대회 논문집, 제주대학교 국제교류관, 2012
- Dae Keun Choi, Sang Hoon Lee, Fabrication and evaluation of a flowmeter with the corrugation structure, Abstract book of International Symposium on Integrated Functionalities, The hong kong polytechnic university, 2012
- 최대근, 윤달성, 이상훈, Fabrication and evaluation of an anemometer with the corrugation structure, Proceedings of The 14th Korean MEMS conference, 제주 칼호텔, 2012
- 최대근, Design and fabrication of a novel flowmeter with corrugated structure, MNE 2011 conference abstract book, Berliner congress center, 2011
- Dae Keun Choi, Deposition Property Investigation of Focused Ion Beam for High-Aspect-Ratio Metal Tip, HARMST 2011, HsinChu, 2011
- 최대근, Investigation of deposition profile for metal structure using focused ion beam, 제13회 한국 MEMS 학술대회 논문집, 제주 칼 호텔, 2011
Patents
- 유속 감지장치 및 그 제조방법, 특허 등록, 대한민국, 2014
- 유속 감지장치 및 그 제조방법, 특허 출원, 대한민국, 2011
Projects
- 전기정보기술연구소, 한국연구재단, 2019.06.~2022.02.
- 공조시스템 활용을 위한 바람저항형 기반의 유속센서 개발, 한국연구재단, 2017.06.~2020.11.
- 골과 연골의 복잡한 결손 조직재생을 위한 생체모방 기능의 구배형 조직재생용 생체재료에 대한 공동연구, 한국연구재단, 2014.12.~2015.11.
- 자동차용 커넥터 허용전류 표준화 수립, (주)유라코퍼레이션, 2014.07.~2014.12.
- 엔진오일 특성 감지를 위한 센서 제작 및 검증, 산학협력단, 2014.05.~2016.04.
- SnO₂가스센서의 제작 및 검증, 산학협력단, 2014.05.~2016.04.
- 입자기반 콘크리트 관통 전산모사 S/W 개발, 국방과학연구소, 2013.06.~2015.11.
- 2단계 공학교육혁신센터지원사업, 한국산업기술진흥원, 2013.03.~2014.02.
- 단차구조를 이용하여 민감도가 향상된 차량용 공기 유속센서의 개발, 한국연구재단, 2012.09.~2015.08.
- 단차구조를 가진 마이크로 소자의 특성에 대한 연구, 산학협력단, 2012.05.~2014.02.
- 온도 및 유량 측정을 위한 복합센서 개발, 산학협력단, 2012.05.~2014.02.
- Comfort 제어를 위한 MEMS 복합센서 개발, LG전자 주식회사 AE 연구소, 2011.11.~2012.10.
- Comfort 제어를 위한 MEMS 기류센서 개발, LG전자 주식회사 AC 연구소, 2010.10.~2011.03.
- 글로벌 경쟁력을 갖춘 산학협력 특성화 혁신센터 사업, 한국산업기술진흥원, 2010.07.~2011.04.
- 민감도가 향상된 전계효과 트랜지스터 탐침 개발, 한국연구재단, 2010.05.~2011.04.
수상
- 2021학년도 교육분야 우수교육상, 2021학년도 교육분야 우수교원, 서울과학기술대학교, 2022
- 교내 우수교육상(2014), 교내 우수교육상(2014), 서울과학기술대학교, 2014