Graduate School

Introduction Faculty Curriculum

Department of Civil Engineering

홈 영문-일반대학원 Department Department of Civil Engineering Faculty

Name	Jin-Kook Kim
MAJOR	Structural Engineering
TEL	02-970-6578
E-mail	jinkook.kim@seoultech.ac.kr

Biography

KAIST Department of Civil Engineering Ph.D., 2001.3-2006.2
※ Thesis title : Inelastic static and dynamic analyses of slender RC columns considering time-dependent deformation of concrete

Careers

[주요 경력]
2006.4~2014.5 (재)포항산업과학연구원 강구조연구소 책임연구원
2014.6~2018.3 (주)포스코 구조연구그룹 전문연구원
2018.4~2022.3 서울과학기술대학교 건설시스템공학과 조교수
2022.4~현재 서울과학기술대학교 건설시스템공학과 부교수

2008 6시그마 Black Belt 인증
2008 (재)포항산업과학연구원 최다 특허출원 표창
2010 Triz Level1 인증
2015 (주)포스코 포스코 패밀리기술상
2016 (주)포스코 우수연구원 선정

[수상]
◾KSCE-Elsevier Award : Best Editor (2026)
◾한국철강협회 강관 수요개발 공로상 (2025)
◾서울시설공단 ‘PSC 교량 내구성 향상 방안’ 집필 감사장 (2025)
◾제7회 콘크리트의 날 한국고로슬래그협회 표창장 (2025)
◾한국도로공사 사장 표창장 : 구조물 안전점검 및 유지관리 기술발전 (2024)
◾서울과학기술대학교 우수교원 표창 : 우수 연구성과 및 산학협력 활성화 (2024)
◾한국콘크리트학회 우수 논문상 (2023)
◾한국과학기술단체총연합회 제33회 과학기술우수논문상 (2023)

[기술실용화]
◾ 기술명 : 2400MPa 강연선 활용 프리텐션-포스트텐션 조합 하이브리드 프리스트레스트 세그먼트 교량거더
- 국책과제: (국토교통부) ICT 교량연구단
- 적용현장: 오송 철도시험선로 35m 복선 철도교 (2017)
◾ 기술명 : 모노텐던 프리스트레스트 콘크리트 교량거더
- 국책과제: (국토교통부) 2160MPa 이상 강연선 이용 교량거더 개발
- 적용현장: 45m 도로교 목계교 외 (2017)
◾ 기술명 : 2400MPa 포스트텐션(PT) 정착장치 (세계최초 개발 및 상용화)
- 국책과제: (국토교통부) 초장대교량사업단
- 적용현장: 태금교(ED교), 인천LNG 탱크, 광양LNG탱크 외 다수 (2014~)
※ 2013년 고강도 PT 한국도로공사 설계방침화.※ 2017년 고강도 PT 한국철도시설공단 설계방침화.
◾ 기술명 : 2200MPa 멀티스트랜드(MS) 사장교 케이블 정착장치 (세계최초 개발 및 상용화)
- 국책과제: (국토교통부) 초장대교량사업단
- 적용현장: 태금교(ED교) 및 서울-세종 고속도로 고덕대교 등 (2015~)

Research Areas

- AI driven prediction of structural performance and damages
- Virtual factory simulation for structural steel pipes and oil/gas pipeline
- Protection against explosions and projectiles.
- Prestressed concrete and post-tensioning system for ultra high strength prestressing steel
- High strength cable in suspension and stay cable bridges
- Smart design and safety analysis of structures

Teaching

Structural Analysis, Reinforced Concrete, Design Optimization, Protective Design of Structures

Journal Papers

◾ Evaluation of Axial Compressive Buckling Performance of Circular Steel Tubes Considering Stress-Strain Curve Characteristics, Journal of Korean Society of Steel Construction, vol.37 No.6 pp.359~369, 2025
[원문보기] 김진국

◾ Gamma-Ray and Thermal Neutron Shielding of Fe-Based Bilayer Composites with a Boron-Enriched Matrix and Tungsten Surface Coatings: Lead Benchmarks Included, materials, 2025
[원문보기] 김진국

◾ Evaluation of mechanical properties of electric resistance welded light gauge H-sections, Structures, vol.80, 2025김진국

◾ Effect of multi-steps expansion on UOE pipe quality through production process, Steel and Composite Structures, vol.57 No.1 pp.47~58, 2025
[원문보기] 김진국

◾ Collapse performance enhancement in the sizing process of ERW pipes produced using edge, double radii, and reverse bending methods, Marine Structures, vol.104, 2025김진국

◾ 인장강도 800 MPa급 블라인드 볼트 및 접합부에 대한 실험적 연구, Journal of Korean Society of Steel Construction, vol.37 No.4 pp.215~227, 2025
[원문보기] 김진국

◾ Hybrid CatBoost for steel pipelines collapse prediction under bending and external pressure, OCEAN ENGINEERING, vol.334, 2025김진국

◾ Impact of sizing process in ERW pipes through circular and edge forming, JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH, vol.229, 2025김진국

◾ Robustness of hybrid light gradient boosting for concrete creep compliance prediction, ADVANCES IN ENGINEERING SOFTWARE, vol.201, 2025김진국

◾ Prediction and reliability analysis of ultimate axial strength for outer circular CFRP-strengthened CFST columns with CTGAN and hybrid MFO-ET model, EXPERT SYSTEMS WITH APPLICATIONS, vol.263, 2025김진국

◾ Evaluation of the flexural stiffness of a lattice girder composite slab at the construction stage according to the lattice girder shape, Structures, vol.70, 2024김진국

◾ 동절기 STS 물탱크의 단열재 설계에 따른 물의 동결 특성 분석, Journal of Korean Society of Steel Construction, vol.36 No.6 pp.365~375, 2024
[원문보기] 김진국

◾ Optimal Shear Strength Enhancement using Corrugated CFRP Panel for H beam with Slender Web, Journal of the Korea institute for Structural Maintenance and Inspection, vol.28 No.5 pp.10~19, 2024김진국

◾ Proposal of a Creep-Experiment Method and Superficial Creep Coefficient Model of CFT Considering a Stress-Redistribution Effect, International Journal of Concrete Structures and Materials, vol.18 No.1, 2024
[원문보기] 김진국

◾ ANN based fire resistance prediction of FRP-strengthened RC slabs with fireproof panel including air layer, Journal of Building Engineering, vol.91, 2024김진국

◾ Mid-span displacement and damage degree predictions of RC beams under blast loading using machine learning-based models, Structures, vol.65, 2024김진국

◾ Machine learning-based model for moment capacity prediction and reliability analysis of PSC beams, Structures, vol.62, 2024김진국

◾ Behavior Characteristics of CFST Columns-Steel Tube Foundations Socket Connection, Journal of the Korea Concrete Institute, vol.36 No.1 pp.33~42, 2024김진국

◾ 변형 오차 흡수가 가능한 STS 라이닝 지지구조 개발, Journal of Korean Society of Steel Construction, vol.36 No.1 pp.25~34, 2024
[원문보기] 김진국

◾ Hybrid machine learning models for classifying failure modes of unstiffened steel plate girders subjected to patch loading, Structures, vol.59, 2024김진국

◾ 공기층을 포함한 이중층 강판의 열전달 특성에 대한 실험 및 해석적 연구, Journal of Korean Society of Steel Construction, vol.35 No.6 pp.385~396, 2023
[원문보기] 김진국

◾ Fire Resistance Evaluation of Fabricated Slim Floor Beams with an Air Layer Applied with Low-E Film according to Load Ratio, Journal of the Korea Concrete Institute, vol.35 No.5 pp.515~522, 2023김진국

◾ CFD를 활용한 이중 패널 벽체구조 무도류벽 원형 물탱크의 흐름특성 분석, Journal of Korean Society of Steel Construction, vol.35 No.4 pp.219~227, 2023
[원문보기] 김진국

◾ Ultimate compressive strength predictions of CFT considering the nonlinear Poisson effect, Steel and Composite Structures, 2023
[원문보기] 김진국

◾ Ensemble machine learning-based models for estimating the transfer length of strands in PSC beams, Expert Systems with Applications, vol.221, 2023김진국

◾ Prediction of the Moment Capacity of FRP-Strengthened RC Beams Exposed to Fire Using ANNs, KSCE Journal of Civil Engineering, 2023
[원문보기] 김진국

◾ Analysis of Behavior Characteristics According to Structural Details of Circular Water Tank with Double Panel Wall, Journal of Korean Society of Steel Construction, vol.35 No.2 pp.59~69, 2023김진국

◾ Innovative formulas for reinforcing bar bonding failure stress of tension lap splice using ANN and TLBO, Construction and Building Materials, vol.369, 2023김진국

◾ Fracture Analysis of Post-Tensioning Anchorage Zone according to Design and Construction Variables, Journal of the Korea Concrete Institute, vol.35 No.1 pp.25~35, 2023김진국

◾ Design Procedure of a Mono-Anchor Head for 2360 MPa High-Strength Steel Strand, Applied Sciences, vol.13 No.4, 2023
[원문보기] 김진국

◾ A Framework for Evaluating the Load-Carrying Capacity of Bridges without Design Document Using an AI Technique, Applied Sciences, vol.13 No.3, 2023
[원문보기] 김진국

◾ An Experimental Study on the Estimation of Transfer Length of Strand in the Prestressed Hollow Core Slab, J Rec Const Resources, vol.10 No.4 pp.395~401, 2022김진국

◾ An Experimental Study on the Development an Embedded Post-Tensioning Anchorage Device for 2,360 MPa Strand, Journal of the Korea Concrete Institute, vol.34 No.6 pp.655~666, 2022김진국

◾ 조관 물성 변화를 고려한 원형 강관의 휨 성능 평가, Journal of Korean Society of Steel Construction, vol.34 No.6 pp.319~329, 2022김진국

◾ 프리스트레스트 CFT 보강 강박스거더의 크리프로 인한 프리스트레스 손실 평가, Journal of Korean Society of Steel Construction, vol.34 No.6 pp.383~392, 2022김진국

◾ Revealing the nonlinear behavior of steel flush endplate connections using ANN-based hybrid models, Journal of Building Engineering, vol.57, 2022김진국

◾ JAYA-GBRT model for predicting the shear strength of RC slender beams without stirrups, Steel and Composite Structures, vol.44 No.5 pp.691~705, 2022김진국

◾ 대용량 웨이브형 물탱크의 설계모델 개발, Journal of Korean Society of Steel Construction, vol.34 No.1 pp.55~66, 2022김진국

◾ Analysis of Bearing Strength of Post-Tensioning Anchorage Zone with Respect to Relative Bearing Area and Lateral Confinement Design, APPLIED SCIENCES-BASEL, vol.11 No.18, 2021김진국

◾ Yield strength estimation of X65 and X70 steel pipe with relatively low t/D ratio, Steel and Composite Structures, vol.38 No.2 pp.151~164, 2021김진국

◾ Applicability of 2360 MPa grade prestressing steel strand: Performance of material, bond, and anchorage system, CONSTRUCTION AND BUILDING MATERIALS, vol.266, 2021김진국

◾ Evaluation of load transfer performance of PSC anchorage according to changes in yield strength and spacing of confinement reinforcement, Journal of the Korea Concrete Institute, vol.32 No.5 pp.457~463, 2020김진국

Books

◾ 최성모, 강구조, 저서, 979-11-6257-277-1, 구미서관, 2024김진국

◾ 김은겸, 철큰콘크리트, 저서, 979-11-6257-283-2, 구미서관, 2024김진국

◾ 심별, 포스트텐셔닝 시스템의 내구성, 저서, 979-11-93348-33-8, KCI, 2023김진국