Introduction
Dean's Welcome About Graduate School History
Department
Department of Mechanical Design and Robot Engineering Department of Mechanical Engineering Department of Safety Engineering Department of Mechanical Information Engineering Department of Data Science Department of Materials Science & Engineering Department of Automotive Engineering Department of Civil Engineering Department of Architecture Department of Electrical and Information Engineering Department of Electronic Engineering Department of Computer Science and Engineering Department of Smart ICT Convergence Engineering Department of Chemical and Biomolecular Engineering Department of Environmental Engineering Department of Food Science and Biotechnology Convergence Institute of Biomedical Engineering and Biomaterials Convergence Program of Biomedical Engineering and Biomaterials Program of Materials Science & Engineering Program of Civil Engineering Program of Architecture Program of Electrical and Information Engineering Department of Interdisciplinary Bio IT Materials Bio IT Program Electronic Engineering Program Department of Fine Chemistry Department of Optometry Department of Industrial Design Department of Visual Design Department of Ceramic Art Department of Metal Art & Design Department of Fine Arts Department of Sports Science Department of Business Administration Department of TESOL Department of Creative Writing Department of Integrated IT Engineering Department of New and Renewable Energy Convergence Department of AI Management
Academic Affairs
Academic Calendar Enrollment for Classes Scholarship Degree Course
Admission
HOME > Department > Department of Mechanical Engineering > Faculty
Introduction Faculty Curriculum
Department of Mechanical Engineering
홈 영문-일반대학원 Department Department of Mechanical Engineering Faculty
Return to Faculty
Name
 Chan Jun Park
MAJOR
 Energy Engineering, Combustion, Automotive Engineering
TEL
 02-970-6313
E-mail
 chanjun@seoultech.ac.kr
Journal Papers
◾ Study on Evaluation Method of Flow Characteristics in Steady Flow Bench(4) - Velocity Profile(2), 한국자동차공학회 논문집, vol.24 No.2 pp.242~254, 2016박찬준
◾ Study on Evaluation Method of Flow Characteristics in Steady Flow Bench(3) - Velocity Profile(1), 한국자동차공학회 논문집, vol.24 No.2 pp.169~182, 2016박찬준
◾ Study on Evaluation Method of Flow Characteristics in Flow Bench(2) - Comparison of ISM and PIV Measurement, 한국자동차공학회 논문집, vol.23 No.1 pp.139~147, 2015박찬준
◾ Study on Evaluation Method of Flow Characteristics in Steady Flow Bench(1) - Raising Issue, 한국자동차공학회 논문집, vol.23 No.1 pp.88~96, 2015박찬준
◾ Combustion Characteristics of Landfill Gas in Constant Volume Combustion Chamber for Large Displacement Volume Engine (II) - Combustion Analysis -, Trans. Korean Soc. Mech. Eng. B, vol.37 No.8 pp.743~752, 2013박찬준
◾ Effect of fuel stratification on initial flame development: Part 3-high swirl condition, INTERNATIONAL JOURNAL OF AUTOMOTIVE TECHNOLOGY, vol.12 No.5 pp.653~660, 2011박찬준
◾ Effects of Port Masking on Emission, 한국자동차공학회 논문집, vol.19 No.3 pp.23~28, 2011박찬준
◾ Part Load Performance Characteristics according to Port Masking, 한국자동차공학회 논문집, vol.19 No.2 pp.42~49, 2011박찬준
◾ Photopatternable, highly conductive and low work function polymer electrodes for high-performance n-type bottom contact organic transistors, ORGANIC ELECTRONICS, vol.12 No.3 pp.516~519, 2011박찬준
◾ A Study on Combustion Characteristic Methane Fuel according to Torch Volume Variation in a Constant Volume Combustion Chamber, 한국가시화정보학회지, vol.9 No.1 pp.42~48, 2011박찬준
◾ A Study on Combustion Characteristics of Methane Fuel according to Torch Nozzle Diameter in a Constant Volume Combustion Chamber, 한국가시화정보학회지, vol.8 No.1 pp.19~24, 2010박찬준
Conference Papers
◾ 소재한, 백성윤, 박찬준, 엄인용, Effect of dividing wall depth on steady flow characteristics in an tandem port of CI engine, KSAE CONFERENCE PROCEEDINGS, 라마다프라자 제주호텔, 2019박찬준
◾ 김선규, 박봉철, 이소영, 정규영, 박찬준, 엄인용, CI 포트에서 반경방향 운동량 분포 비교 - 접선형 포트, KSAE 2017 Annual Autumn Conference & Exhibition, 여수엑스포컨벤션센터, 2017박찬준
◾ 유해빈, 유우, 박찬준, 엄인용, CI 포트에서 반경방향 운동량 분포 비교 - 나선형 포트, KSAE 2017 Annual Autumn Conference & Exhibition, 여수 엑스포 컨벤션센터, 2017박찬준
◾ 유해빈, 김선규, 박찬준, 엄인용, 이상철, 김형현, Normal flow development process of CI engine (3) - Spiral and tangential type simultaneous use, KSAE CONFERENCE PROCEEDINGS, 대구EXCO, 2016박찬준
◾ 유해빈, 신동준, 박찬준, 엄인용, 이상철, 김형현, Normal flow development process of CI engine (2) - Tangential port, KSAE CONFERENCE PROCEEDINGS, 대구 EXCO, 2016박찬준
◾ 김선규, 양은주, 나정석, 엄인용, 박찬준, Comparison of steady flow evaluation of ISM and PIV method in helical port, KSAE CONFERENCE PROCEEDINGS, 제주도, 2016박찬준
◾ 신동준, 유해빈, 엄인용, 박찬준, Comparison of Steady Flow Evaluation of ISM and PIV Method in a tangential Port, KSAE CONFERENCE PROCEEDINGS, 제주도, 2016박찬준
◾ 신동준, 유해빈, 엄인용, 박찬준, 직선형 포트의 평가위치에 따른 정상유동 특성, KSAE CONFERENCE PROCEEDINGS, 경주, 2015박찬준
◾ 장맹, 김선규, 엄인용, 박찬준, 나선형 포트의 평가위치에 따른 정상유동 특성, KSAE CONFERENCE PROCEEDINGS, 경주, 2015박찬준
◾ 장맹,박진규,신동준,박찬준,엄인용, An Experimental Study on Gas Fuel Injection Characteristics per Cylinder due to Fuel Rail Volume Change of the 4-cylinders Gasoline Engine, KSAE CONFERENCE PROCEEDINGS, 부산, 2015박찬준
◾ 권순태,김선규,박찬준, 토치 장치를 이용한 정적연소실의 최고 입력에 관한 연구, KSAE CONFERENCE PROCEEDINGS, 부산, 2015박찬준
◾ 권순태,박찬준,엄인용, 토치 장치의 최소 오르피스 직경에 관한 연구의 연소 특성, 한국자동차공학회 정기 학술대회 및 전시회, 부산, 2014박찬준
◾ 장맹,권순태,최상준,김지찬,박진규,박찬준,엄인용, Fuel Injection Characteristics of Gas Fuel according to Fuel-rail Pressure, KSAE CONFERENCE PROCEEDINGS, 부산, 2014박찬준
◾ 권순태 최상준 현지혜 박찬준 엄인용, Fuel Injection Characteristics of Gas Fuel according to Fuel-rail Volume, KSAE Spring Conference Proceedingsdings, BEXCO, 2014박찬준
◾ 권순태 장맹 조시형 박찬준 엄인용, Fuel Injection Characteristics of Gas Fuel according to Fuel Pipe Length, KSAE Spring Conference Proceedingsdings, BEXCO, 2014박찬준
◾ 권순태 장맹 황세영 박찬준 엄인용, Intake Flow Characteristics according to Intake Valve Angle, KSME 2013 Annual Conference Proceedingsroceedings, 강원랜드 컨벤션샌터, 2013박찬준
◾ 권순태 조시형 조원휘 박찬준 엄인용, In-Cylinder Flow Distribution in Steady Flow Bench, KSAE 2013 Annual Conference Proceedings, 강원랜드 컨벤션 센터, 2013박찬준
◾ 권순태 현지혜 황세영 박찬준 엄인용, Comparison of Swirl Value between Swirl Meter and Velocity Field, KSAE Annual Conference Proceedingsdings, KINTEX, 2013박찬준
◾ 권순태 최상준 조원휘 박찬준 엄인용, A Study of In-Cylinder Swirl Evaluation Position in Steady Flow Bench, KSAE Annual Conference Proceedingsings, KINTEX, 2013박찬준
◾ 권순태, 황세영, 조원휘, 박찬준, 엄인용, A Study on the Design of Torch-Ignition Device, 대한기계학회 2012년도 추계학술대회 논문집, 창원컨벤션센터, 2012박찬준
◾ 권순태, 강성백, 조원휘, 박찬준, 엄인용, Measuring Swirl in Steady Flow Benc Using Particle Image Velocimetry, 제7회 한국유체공학학술대회 논문집, 경주드림센터, 2012박찬준
◾ 권순태, 강민균, 조시형, 황세영, 박찬준, 엄인용, Swirl Flow Characteristics in Steady Flow Bench according to Cylinder Stroke Length, 제7회 한국유체공학학술대회 논문집, 경주드림센터, 2012박찬준
◾ 권순태, 강민균, 김인옥, 박찬준, 엄인용, 정적 연소실에서 토치 점화 장치의 체적 변화에 따른 LFG의 연소 특성, 한국자동차공학회 학술대회 논문집, 대, 2011박찬준
◾ 권순태, 강민균, 강설백, 박찬준, 엄인용, A Study on Combustion Characteristics of Landfill Gas in a CVCC, 대한기계학회 추계학술대회 논문집, 대구, 2011박찬준
◾ 권순태, 강민균, 조시형, 박찬준, 엄인용, Combustion Characteristics of Landfill Gas according to Torch Orifice Size of Torch in a CVCC, 대한기계학회 추계학술대회 논문집, 대구, 2011박찬준
◾ 토치 점화 장치의 체적 변화에 따른 메탄의 연소특성 파악, 대한기계학회 열공학부문 춘계학술대회 논문집, 전북대학교, 2010박찬준
◾ 오리피스 직경 변화에 따른 토치 점화 장치의 성능 파악, 대한기계학회 열공학부문 춘계학술대회 논문집, 전북대학교, 2010박찬준
◾ 정적연소기에서 토치 점화 장치의 오리피스 직경변화에 따른 메탄의 연소 특성 파악, 한국자동차공학회 부문 종합 학술대회 논문집, 2010박찬준
◾ 정적연소기에서 토치 점화 장치의 체적 변화에 따른 메탄의 연소 특성 파악, 한국자동차공학회 부문종합 학술대회 논문집, BEXCO, 2010박찬준
◾ 토치 점화 장치의 오리피스 직경에 따른 연소특성 파악, 한국에너지공학회 춘계학술대회 논문집, 대전컨벤션센터, 2010박찬준
◾ 토치 점화 장치의 체적에 따른 연소특성 파악, 한국에너지공학회 학술대회 논문집, 대전컨벤션센터, 2010박찬준
Projects
◾ 정상유동 장치에서 유동 특성 평가 방법에 대한 연구(3)-유속분포(1), 산학협력단, 2015.09.~2016.03.박찬준
◾ 정상유동 장치에서 유동 특성 평가 방법에 대한 연구(4)-유속분포(2), 산학협력단, 2015.09.~2016.03.박찬준
◾ 정상 유동 장치에서 실린더 내 유동 측정 방법에 관한 연구, 산학협력단, 2012.09.~2014.02.박찬준
◾ 정적연소실에서 토치점화장치를 이용한 메탄가스의 연소 성능 개선에 관한 연구, 산학협력단, 2012.09.~2014.02.박찬준
◾ sk 네트웍스 전기자동차 개조 기술 연구, SK네트웍스(주), 2010.02.~2010.09.박찬준
232 Gongneung-ro, Nowon-gu, Seoul, 01811, korea Tel :+82-2-970-6793 Fax : +82-2-970-6800
Copyright © Seoul National University of Science&Technology. All rights Reserved.