Graduate School

Introduction Faculty Curriculum

Department of Mechanical Engineering

홈 영문-일반대학원 Department Department of Mechanical Engineering Faculty

Name	Joohan Kim
MAJOR	Precision special processing, Micro / Nano Systems, Renewable Energy Systems, Machine Optical system, Bio-Mechanical Engineering
TEL	02-970-6314
E-mail	joohankim@seoultech.ac.kr

Journal Papers

◾ Effects of Temperature on Optical Aberrations in Beam Delivery Components, International Journal of Precision Engineering and Manufacturing, vol.11 No.1 pp.1~12, 2023김주한

◾ A Study on the Generation of Negative Tapered Holes in Laser Process of the Metal Material, International Journal of Precision Engineering and Manufacturing, vol.9, 2023김주한

◾ Effect of Bubble on Processing Efficiency According to Pulse Laser Repetition Rate Laser Processing in Liquid, Journal of the Korean Society of Manufacturing Process Engineers, 2023김주한

◾ Effect on Bacterial Culture on Ceramic Surfaces Deposited Using a Laser, J. Korean Soc. Precis. Eng, vol.40 No.4 pp.269~274, 2023김주한

◾ A Study on the Improvement of Bonding Strength of Heterojunctions by Applying Laser Surface Treatment to Carbon Fiber Reinforced Plastics, J. Korean Soc. Precis. Eng.,, vol.39 No.9 pp.683~689, 2022김주한

◾ Analysis of Changes in Spectral Signal According to Gas Flow Rate in Laser-Induced Breakdown Spectroscopy, Applied sciences, vol.11 No.19, 2021김주한

◾ 마그네슘 합금 표면의 지르코니아 분말 레이저 소결과정에서 조사 패턴이 접합계면 품질에 미치는 영향, Journal of the Korean Society of Manufacturing Process Engineers, vol.20 No.2 pp.51~57, 2021김주한

◾ Effect of Pd Ions on the Generation of Ag and Au Heterogeneous Nanoparticles Using Laser Ablation in Liquid, Applied Sciences, vol.11 No.1394, 2021김주한

Conference Papers

◾ 우성철, 김지훈, 김주한, A study for the optimization and modeling about precision operation system of laser scanning system, KSMPE conf. Proc. 2023, 제주, 2023김주한

◾ 김지훈, 박찬식 , 김주한, The effects of temperature conditions on aberration in a mirror holder, KSMPE conf proc. 2023, 제주, 2023김주한

◾ 김지훈, 우성철 ,김주한, Thermal effects of wafer processing according to high-power laser conditions, 2023 Proc. KSMTE, 강릉, 2023김주한

◾ 왕환, 김지훈,우성철, 정성균, 김주한, A study on analysis for shear stress strength of CFRTP using laser surface treatment, KSMTE Conf. Proc., 강릉, 2023김주한

◾ 김지훈, 김주한, The effects of temperatrue conditions on aberration in the beam delivery system, LPM2023, Japan, 2023김주한

◾ 윤상우, 이우람. 김주한, Effect of Bubble Cavitation on Processing Quality Using Pulsed Laser Ablation in Liquid, KSPE 2023 spring, 제주, 2023김주한

◾ 윤상우, 김주한, A study on the surface processing of the 3D cell culture base of ceramic materials using laser sintering, 2023 KSMTE Spring, 부산, 2023김주한

◾ 우성철, 김주한, A Study on the Characteristic for the Thermal Rffect and Generation of ablation Hole by the Pulse Laser Beam, KSMPE Fall 2022, 제주, 2022김주한

◾ 왕환, 우성철, 정성균, 김주한, Laser Surface Treatment for Bonding Carbon Fiber Reinforced Thermal Polymers and Aluminum Alloy, KSMPE conf. 2022, 제주, 2022김주한

◾ 윤상우, 김주한, Effect of bubble cavitation on processing quality using pulsed laser ablation in liquid, KSMPE 2022 Fall, 제주, 2022김주한

◾ 윤상우, 김주한, A study on S. aureus culture according to surface characteristics in ceramic microstructure using LIBT deposition process, KSMPE 2022 Fall conf, 제주, 2022김주한

◾ 왕환, 우성철, 정성균, 김주한, Effect of laser surface treatment on adhesive joints of carbon fiber reinforced plastic and alumium alloy, KSMPE conf. proceedings, 여수, 2022김주한

◾ 윤상우, 김주한, Laser Induced Backward Transfer using Ceramic Materials for Bacteria Cell Culture Deposition, KSMPE Spring Conf. 2022, 여수, 2022김주한

◾ 윤상우, 김주한, Method of Measuring Fluid Flow in Chamber using LIBS, KSMPE conference 2022 spring, 여수, 2022김주한

◾ 우성철, 왕환, 정성균, #김주한, A study on simulation of heat-transfer of thermoplastic CFRP using a laser process, Proceedings KSMPE, 여수, 2022김주한

◾ 우성철, 왕환, 홍민철, 정성균, 김주한, A study on verification of heat-affected zone of thermoplastic CRFP using a laser process, KSMPE Fall conf 21, 제주, 2021김주한

◾ 우성철, 김주한, A study on the generation of negative tapered holes in laser process, KSMPE 21 Spring Conf., 부산, 2021김주한

Projects

◾ 고출력 빔을 이용한 열영향층이 최소화(？20μm)된 자유 형상(최소지름3mm)의 WLCSP(Wafer Level Chip Scale Package) 고정밀(±5μm) 가공 장비 개발, 한국산업기술진흥원, 2020.12.~2023.11.김주한

Awarded

◾ 광 전달 시스템에서 온도조건이 광학 수자에 미치는 영향, 추계학술대회 우수논문상, KSMPE, 2023김주한

◾ 펄스레이저를 이용한 수중가공에서 펄스반복률에 다른 버블효과, 학술지 우수논문상, KSMPE, 2023김주한

◾ CFRP Effect for laser ablation, Best Presentation, KSMTE, 2021김주한