Graduate School

Introduction Faculty Curriculum

Department of Mechanical Information Engineering

홈 영문-일반대학원 Department Department of Mechanical Information Engineering Faculty

Name	Jihong Hwang
MAJOR	Machining, Grinding, Additive Manufacturing, Metrology, Instrumentation
TEL	02-970-6396
E-mail	hwangjh@seoultech.ac.kr

Biography

- 2005 Purdue University, USA ( Ph.D. - Industrinal Engineering )
- 1999 Seoul National University, Korea ( M.S. - Mechanical Design & Production Engineering )
- 1997 Seoul National University, Korea ( B.S. - Mechanical Design & Production Engineering )

Careers

- 2018. 4. - Present Professor, Dept. of Mechanical System Design Eng., Seoul Nat'l Univ. of Sci. & Tech., Korea
- 2013. 4. - 2018. 3. Associate Professor, Dept. of Mechanical System Design Eng., Seoul Nat'l Univ. of Sci. & Tech., Korea
- 2007. 3. - 2013. 3. Assistant Professor, Dept. of Mechanical System Design Eng., Seoul Nat'l Univ. of Sci. & Tech., Korea
- 2005. 6. - 2007. 3. Senior Research Engineer, Grinding & Finishing Sector, Saint-Gobain High Performance Materials, USA
- 2004. 6. - 2004. 8. Graduate Lecturer, Purdue University, USA
- 2003. 6. - 2003. 8. Ph.D. Student Intern, R&D Labs, Delphi Corporations, USA
- 2000. 1. - 2005. 5. Research Assistant, Purdue University, USA

Research Areas

- Material Removal Processes ( Machining, Grinding, Polishing )
- Additive Manufacturing (DFAM, AMFD, Multi-Material, Complex Structure )
- Metrology and Instrumentation ( IR Thermography, High-Speed Photography )
- Cognitive Engineering ( Psychophysics in Haptic and Visual Perception )
- Human & Robot Interaction ( Affective Design for Robot Appearance and Gestures )

Teaching

- Manufacturing Processes (undergraduate)
- Engineering Programming (undergraduate)
- Machining Practice (undergraduate)
- Sensors and Measurements (undergraduate)
- Advanced Measurement and Control (graduate)

Selected Publications

- Lee, J. H., Lee, E. and Hwang, J. (2019), ‘Investigation into the Strain Distribution in the Primary Deformation Zone in 2-D Orthogonal Machining using Particle Image Velocimetry’, Journal of the Korean Society of Manufacturing Technology Engineers, 28(1), 1-8, (Awarded for 2019 KSMTE Best Paper).
- Ahn, I. H., Bi, G., Hwang, J. and Moon, S. K. (2017), ‘Characteristic Length of the Solidified Melt Pool in Selective Laser Melting Process’, Rapid Prototyping Journal, 23(2), 370-381.
- Ko, H., Moon, S. K. and Hwang, J. (2015), ‘Design for Additive Manufacturing in Customized Products’, International Journal of Precision Engineering and Manufacturing, 16(11), 2369-2375 (Awarded for 2017 IJPEM Highly Commended Paper).
- Moon, S. K., Tan, Y. E., Hwnag, J. and Yoon, Y. (2014), ‘Application of 3D Printing Technology for Designing Light-Weight Unmanned Aerial Vehicle Wing Structures’, International Journal of Precision Engineering and Manufacturing – Green Technology, 1(3),223-228 (Awarded for 2014 IJPEM-GT Most Downloaded Paper).
- Hwang, J, Park, T. and Hwang, W. (2013), ‘The Effects of Overall Robot Shape on the Emotions Invoked in Users and the Perceived Personalities of Robot’, Applied Ergonomics, 44(3), 459-471 (reviewed in a canadian magazine, Hazlift).

Journal Papers

◾ Multi-criteria Decision Making of the Optimal Micromachining Process Using Fuzzy AHP-TOPSIS, Journal of the Korean Society for Precision Engineering, vol.40 No.8 pp.617~624, 2023황지홍

◾ EMOTIONAL FACTORS OF TACTILE PERCEPTION ON THE SURFACE MATERIALS FOR STEERING WHEELS, ICIC Express Letters, Part B: Applications, vol.14 No.4 pp.443~448, 2023황지홍

◾ Fabrication Methods for Microscale 3D Structures on Silicon Carbide, INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, vol.23 No.12 pp.1477~1502, 2022황지홍

◾ The Fabrication of a High-Aspect-Ratio Microfluidic Device for Microparticle Separation under Viscoelastic Fluid, Journal of the Korean Society for Precision Engineering, vol.39 No.10 pp.725~730, 2022황지홍

◾ Relationship between surface roughness and touch perception on the surfaces with randomly spaced, irregular features, Journal of the Korean Society for Precision Engineering, vol.38 No.8 pp.559~565, 2021황지홍

◾ Microchannel Fabrication on Glass Materials for Microfluidic Devices, INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, vol.20 No.3 pp.479~495, 2019황지홍

◾ Investigating the Strain Distribution in the Primary Deformation Zone in 2-D Orthogonal Machining Using Particle Image Velocimetry, Journal of the Korean Society of Manufacturing Technology Engineers, vol.28 No.1 pp.1~8, 2019황지홍

◾ Absolute Threshold in Tactile Sensing of Step by Fingertip, Journal of the Korean Society of Manufacturing Technology Engineers, vol.27 No.6 pp.517~523, 2018황지홍

◾ Characteristic length of the solidified melt pool in selective laser melting process, Rapid Prototyping Journal, vol.23 No.2 pp.370~381, 2017황지홍

◾ An efficient way of investigating the intrinsic size effect in machining, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, vol.230 No.9 pp.1622~1629, 2016황지홍

◾ Tactile emotional factors for in-vehicle surface materials, ICIC Express Letters, Part B: Applications, vol.7 No.8 pp.1699~1704, 2016황지홍

◾ Emotions perceived from motions by human, animation and robot, ICIC Express Letters, vol.10 No.6 pp.1341~1346, 2016황지홍

◾ A mechanistic cutting force model with consideration of the intrinsic and geometric size effects decoupled, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, vol.81 No.43228 pp.745~753, 2015황지홍

◾ Design for additive manufacturing in customized products, NTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, vol.16 No.11 pp.2369~2375, 2015황지홍

◾ 3D printing as an efficient way for comparative study of biomimetic structures - trabecular bone and honeycomb, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, vol.28 No.11 pp.4635~4640, 2014황지홍

◾ Direct Observation of Fluid Action at the Chip-Tool Interface in Machining, INTERNATIONAL JOURNAL OF PRECISION ENGINEERING & MANUFACTURING, vol.15 No.10 pp.2041~2049, 2014황지홍

◾ Application of 3D Printing Technology for Designing Light-Weight Unmanned Aerial Vehicle Wing Structures, Internation Journal of Precision Engineering and Manufacturing - Green Technology, vol.1 pp.223~228, 2014황지홍

◾ Physical Surface Roughness and Perceived Roughness, 디자인학연구, vol.27 No.2 pp.157~169, 2014황지홍

◾ Cryogenic Machining of Open-Cell Silicone Foam, 한국생산제조시스템학회지, vol.23 No.1 pp.32~37, 2014황지홍

◾ Generation of effective vibrotactile stimuli to convey information, ICIC Express Letters, vol.7 No.5 pp.1637~1641, 2013황지홍

◾ Perceived roughness for random surfaces, ICIC Express Letters, vol.7 No.5 pp.1713~1717, 2013황지홍

◾ The effects of overall robot shape on the emotions invoked in users and the perceived personalities of robot, APPLIED ERGONOMICS, vol.44 pp.459~471, 2013황지홍

◾ Measurement of Temperature Field in the Primary Deformation Zone in 2-D Orthogonal Machining Using IR (Infra-Red) Thermography, Journal of the Korean Society for Precision Engineering, vol.29 No.8 pp.853~862, 2012황지홍

◾ Human Motion Analysis for Silver Robots, Journal of Korean Society of Design Science, vol.25 No.3 pp.1~9, 2012황지홍

◾ Physically Compatible Characteristic Length of Cutting Edge Geometry, Journal of the Korean Society for Precision Engineering, vol.29 No.3 pp.279~288, 2012황지홍

◾ Curve-typed PMMA Nanochannel Fabrication using Polymer Layer Transfer and Collapse Technique, Journal of the Korean Society for Precision Engineering, vol.29 No.1 pp.114~120, 2012황지홍

◾ Contact Conditions at the Chip-Tool Interface in Machining, INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUF, vol.12 No.2 pp.183~193, 2011황지홍

◾ Vibration Perception and Excitatory Direction for Haptic Devices, JOURNAL OF INTELLIGENT MANUFACTURING, vol.22 pp.17~27, 2011황지홍

◾ Error Analysis of the Cutting Coefficients and Optimization of Calibration Procedure for Cutting Force Prediction, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, vol.225 No.B2 pp.149~162, 2011황지홍

◾ 손끝 진동에 대한 인간의 지각과 감성, 디자인학연구, vol.23 No.5 pp.127~138, 2010황지홍

◾ Difference Thresholds in Surface Roughness Perception, 디자인학연구, vol.22 No.4 pp.217~230, 2009황지홍

◾ Facilitating the design of vibration for handheld devices, Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), vol.5611 LNCS No.PART 2 pp.496~502, 2009황지홍

◾ Large strain deformation field in machining, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, vol.37A No.5 pp.1633~1643, 2006황지홍

◾ LARGE STRAIN DEFORMATION AND ULTRA-FINE GRAINED MATERIALS BY MACHINING, MATERIALS SCIENCE AND ENGINEERING A, vol.410/411 No.410/411 pp.358~363, 2005황지홍

◾ IN-PROCESS ESTIMATION OF RADIAL IMMERSION RATIO IN FACE MILLING USING CUTTING FORCE, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, vol.22 pp.313~320, 2003황지홍

◾ MEASUREMENT OF TEMPERATURE FIELD IN SURFACE GRINDING USING INFRA-RED (IR) IMAGING SYSTEM, JOURNAL OF TRIBOLOGY, vol.125(2) No.125(2) pp.377~383, 2003황지홍

Conference Papers

◾ 김종환, 황지홍, Compressive Surface Stress Relaxation of Chemically Strengthened Glass by CO2 Laser-based Reverse Ion Exchange Treatment, 한국정밀공학회 2023 추계학술대회 논문집, 쏠비치 삼척, 2023황지홍

◾ Seong-Gu Kang, Jonghwan Kim, Jihong Hwang, Taxonomy and CAD Feature Extraction Algorithm for Micro-machined Shapes, Proceedings of PRESM 2023, Bankoku Shinryokan, Okinawa, Japan, 2023황지홍

◾ 김종환, 안일혁, 황지홍, Surface Treatment for Mechanical Cutting of Chemically Strengthened Glass Using Blue Diode Laser, 한국정밀공학회 2023 춘계학술대회 논문집, 라마다프라자 제주호텔, 2023황지홍

◾ 강성구, 황지홍, An algorithm for selecting an optimal micro-machining process using B-Rep modeling and TOPSIS, 2022 한국생산제조학회 추계학술대회 논문집, 라마다프라자 제주호텔, 2022황지홍

◾ Jonghwan Kim, Seong-Gu Kang, Jihong Hwang, Selective Stress Relaxation of Chemically Strengthened Glass for Mechanical Cutting by Reverse Ion-exchange using Electrochemical Discharge (ECD) Processing, Proceedings of the 9th International Conference of Asian Society for Precision Engineering and Nanotechnology, Singapore Nanyang Technological University , 2022황지홍

◾ 황지홍, 김종환, A Cutting System of Chemically Strengthened Glass Using Selective Reverse Ion Exchange by Electrochemical Discharge, 한국정밀공학회 2022년도 춘계학술대회 논문집, 라마다프라자 제주호텔, 2022황지홍

◾ 황지홍, 강성구, Decision Making Algorithm for Selection of Micro Machining Process Using Fuzzy AHP-TOPSIS, Proceedings of KSPE 2021 Falll Conference, 부산 벡스코, 2021황지홍

◾ 김대영, 황지홍, Surface Treatment of Chemically Strengthened Glass(Gorilla Glass) by Electrochemical Discharge(ECD) for Mechanical Cutting, Proceedings of PRESM 2021, Online, 2021황지홍

◾ 황지홍, 강성구, Tool Breakage Prediction Using Vision and Artificial Neural Network in Micro-drilling, Proceedigns of KSPE 2021 Spring Conference, 온라인, 2021황지홍

◾ 4, Measurement of 3D Deformation in the Uniaxial Tensile Testing using Oblique Particle Image Velocimetry (PIV), Proceedings of the KSPE 2020 Conference, 비대면, 2020황지홍

◾ 3, Effect of Motion Cueson Simulator Sickness in a Flight Simulator, Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), vol 12190. Springer, Cham., 비대면, 2020황지홍

◾ 4, Design of dog collar and handle-type device to reduce dog bite accidents caused by one’s companion dogs, Proceedings of the 2020 KSDS Spring International Conference, 비대면, 2020황지홍

◾ 오영탁, 황지홍, Investigation into the size effect due to strain gradient in machining, Proceedings of the KSMTE 2019 Fall Conference, 제주 KAL 호텔, 2019황지홍

◾ Byoungjin Choi, Jihong Hwang, Determination of the stress-strain relation in plain strain tensile testing using high-speed photography and infra-red (ir) thermography, Proceedings of PRESM 2019, Nalod Dang Hotel, 2019황지홍

◾ 황지홍, 김상훈, 최병진, Development of a Method for Measuring the Dynamic Run-Out of a Tool During Micro- Machining Using a Vision System, Proceedings of the KSPE 2019 Spring Conference, 제주 라마다 호텔, 2019황지홍

◾ 최준혁, 최병진, 황현진, 황지홍, 화학적 강화유리의 표면성질 개질, 한국금형공학회 2018 동계학술대회 논문집 , 한국금형기술교육원, 2018황지홍

◾ Sang Hoon Kim, Jihong Hwang, Development of an In-process Micro-tool Condition Monitoring System Using Stroboscopy, Proceedings of the International Symposium on Precision Engineering and Sustainable Manufacturing (PRESM 2018), Sapporo Convention Center, 2018황지홍

◾ Eunho Lee, Jihong Hwang, A Novel Method for Determining the Flow Stress by Simultaneous Measurements of the Strain and Temperature Field in the Deformation Zone During Tensile Testing, Proceedings of the International Symposium on Precision Engineering and Sustainable Manufacturing (PRESM 2018), Sapporo Convention Center, 2018황지홍

◾ 김상훈, 정민호, 황지홍, Development of a Real-time Micro-tool Condition Monitoring System using Stroboscopy, Proceedings of the 2018 KSPE Spring Conference, 제주 라마다 호텔, 2018황지홍

◾ 이은호, 황지홍, 원시태, 최병진, Measurement of Strain Distribution in the Necking Area during the Uniaxial Tensil Test using Particle Image Velocimetry (PIV), Proceedings of the KSPE 2018 Spring Conference, 제주 라마다 호텔, 2018황지홍

◾ 황지홍, 최병진, Investigation into the feasibility of residual stress induced during machining of Al6061 using FEM software, 2017년도 한국금형공학회 동계학술대회 논문집, 제주대학교 아라컨벤션홀, 2017황지홍

◾ Yeonji Yu, Jihong Hwang, Sang-il Lee, Eunyoung Choi, Jinhyung Kim, Arim Song, Taezoon Park, Error-Inducing Factors in Operating Infusion Pumps, Proceedings of 5th ASIA-Korea Conference on Science and Technology (AKC 2017), Marinabay Sands Convention Center, Singapore, 2017황지홍

◾ 황지홍, 김상훈, 원시태, Investigation into the machinability of gorilla glass in thrust force controlled grooving, 한국정밀공학회 2017년도 춘계학술대회 논문집, 제주 라다마 호텔, 2017황지홍

◾ 박혜진, 이선주, 전장은, 황지홍, Relationship between the Touch Perception and Cooling Rate of Plastic Surface, Proceedings of ICMDT 2017, 제주 라마다 호텔, 2017황지홍

◾ 김상훈, 이은호, 김성후, 황지홍, Investigation into the machinability of gorilla glass in force controlled grooving using a micro-endmill, 2016 한국생산제조학회 추계학술대회 논문집, 제주 KAL 호텔, 2016황지홍

◾ 김성후, 김상훈, 박혜진, 이은호, 황지홍, Estimation of Flow Stresswithin the Primary Deformation Zone by the Direct Measurement of Strain and Temperature Fields During 2-D Orthogonal Machining, 한국정밀공학회 2016년도 추계학술대회 논문집, 여수 디오션리조트, 2016황지홍

◾ Seung Ki Moon, Yu En Tan, Hyunwoong Ko, Zhong Yang Chua, Teck Hui Ngo, Jihong Hwang, Jung Woo Baek, A CUSTOMIZED 3D PRINTED SENSOR DEVELOPMENT FRAMEWORK FOR COMPONENT CONDITION MONITORING, Proceedings of IJIE 2016, The Hotel President, Seoul, Korea, 2016황지홍

◾ 백정우, 문승기, 황지홍, EFFECT OF 3D PRINTING TECHNOLOGY IN A PRODUCTION-MANUFACTURING SYSTEM: QUEUEING THEORETIC APPROACH, Proceedings of IJIE 2016, The Hotel President, Seoul, Korea, 2016황지홍

◾ 윤형준, 정구훈, 정석환, 황지홍, Redesign and Multi-Material 3D Printing of Dynamic Mechanical Parts - RC Car Suspension, Proceedings of IJIE 2016, The Hotel President, Seoul, Korea, 2016황지홍

◾ 정지연, 황지홍, 박태준, 황원일, Tactile Emotional Factors for In-Vehicle Material Design, Proceedings of ICICIC2016, Harbin Engineering University, Harbin, China, 2016황지홍

◾ 황지홍, 문승기, 황원일, 박태준, Perceived Emotion Induced by a Surface with Random Roughness, Proceedings of 1st International Conference on Design and Production Engineering, Sheraton Hotel, Berlin, Germany, 2016황지홍

◾ 김성현, 김헌, 정완진, 황지홍, A Method to Estimate the Flow Stress of a Material under Extreme Deformation using the Strain and Temperature Data in the Deformation Zone of Workpiece during Machining, Proceedings of ISGMA 2016, Bali Nusa Dua Convention Center, Bali, Indonesia, 2016황지홍

◾ 정지연, 황지홍, 황원일, 박태, Evaluation of Tactual Perception on the Sufaces of Automobile Interior Plastic Parts, 2016 한국디자인학회 봄 국제학술대회 논문집, 한국예술종합학교, 2016황지홍

◾ 황지홍, 박혜진, 김상훈, 이은호, 김성후, 정지연, In-Situ Observation of the Contact Condition at the Chip-Tool Interface in Vibration Assisted Machining, 한국정밀공학회 2016년도 춘계학술대회 논문집, 제주 라마다 호텔, 2016황지홍

◾ 황지홍, 김성현, 이주호, Experimental Investigation and Modeling of the Intrinsic Size Effect in Machining, 2015 한국정밀공학회 추계학술대회 논문집, 강원 하이원리조트 컨벤션호텔, 2015황지홍

◾ Jihong Hwang, Taezoon Park, Wonil Hwang, Emotions Perceived from Motions by Human, Animation and Robot, Proceedings of the 28th Annual Conference of Biomedical Fuzzy Systems Association, Kumamoto, Japan, 2015황지홍

◾ 황지홍, 김성현, 이동윤, 김성후, 정지연, Measurement of the absolute threshold in visual perception of surface deflection on automotive panel, 2015 한국생산제조시스템학회 추계학술대회, 제주 KAL 호텔, 2015황지홍

◾ Hyunwoong Ko, Seung-Ki Moon, Jihong Hwang, Design for Additive Manufacturing in Customized Products, 2014 International Symposium on Green Manufacturing and Applications, Busan, Korea, 2014황지홍

◾ 황지홍, 이주호, FABRICATION OF DETERMINISTIC AND RANDOM SURFACES USING 3-D PRINITNG TECHNOLOGY FOR PSYCHOPHYSICAL STUDIES OF ROUGHNESS PERCEPTION, Proceedings of the 1st International Conference on Progress in Additive Manufacturing, Nanyang Executive Center, NTU, Singapore, 2014황지홍

◾ 김명재, 황지홍, 이주호, Temperature Distribution in the Primary Deformation Zone and the Size Effect in 2-D Orthogonal Machining, 한국정밀공학회 2014년도 춘계학술대회 논문집, 라마다플라자 제주호텔, 2014황지홍

◾ 이주호, 황지홍, Determination of Flow Stress of Metals under Extreme Deformation using the Temperature and Strain Distributions in the Primary Deformation Zone Directly Measured during 2-D Orthogonal Machining, 한국정밀공학회 2014년도 춘계학술대회 논문집, 라마다플라자 제주 호텔, 2014황지홍

◾ 이동윤, 김성현, 김선미, 정모아, 이주호, 황지홍, 황원일, Investigation into the visual perception for surface deflection with application to its quantative assessment on automobile exterior panels, ASIA-KOREA Conference on Science and Technology, Resorts World Sentosa Convention Center, Singapore, 2013황지홍

◾ 김성현, 이동윤, 김선미, 정모아, 이주호, 황지홍, Qualitative evaluation of visually-perceived sruface detection for the automobile exterior panels, 2013 추계학술대회, 제주 KAL 호텔, 2013황지홍

◾ 이동윤, 이명규, 김동후, 김태호, 황지홍, Determination of flow stress model parameters using 2D FE cutting simulation for hard steel, 2013 추계학술대회, 제주 KAL 호텔, 2013황지홍

◾ 이주호, 김성현, 이동윤, 정모아, 황지홍, Investigation into the Relationship between the Strain Distribution in the Primary Deformation Zone and the Size Effec in 2-D Orthogonal Machining, 2013 춘계학술대회, 제주 라마다호텔, 2013황지홍

◾ 조광희, 장현석, 오성환, 황지, Development of a cryogenic machining process of opened cell silicon foam, 2013 춘계학술대회, 부산 BEXCO, 2013황지홍

◾ 이동윤, 이명규, 김동후, 김태호, 황지홍, Flow Stress Determination of Hardened Steel for Hard Turning FEM Simulation, 2013 춘계학술대회, 부산 BEXCO, 2013황지홍

◾ Wonil Hwang, Jihong Hwang, Perceived Roughness for Random Surfaces, ICIC Express Letters, Sanghai, China, 2012황지홍

◾ Jihong Hwang, Wonil Hwang, Generation of Effective Vibrotactile Stimuli to Convey Information, ICIC Express Letters, Sanghai, China, 2012황지홍

◾ 황지홍, Micro-Scale Characterization of Strain and Temperature Fields in Machining, 제9회 금형가공 심포지엄 논문집, 김포 메이필드호텔, 2012황지홍

◾ Wonil Hwang, Jihong Hwang, Taezoon Park, Pleasurable Design of Haptic Icons, Proceedings of the 4th AHFE Conference, San Fransisco, USA, 2012황지홍

◾ Jihong Hwang, Taezoon Park, Wonil Hwang, Investigation into the Human Perception of Motions Performed by Human and Robot, Proceedings of 2nd Southeast Asian Network of Ergonomics Societies (SEANES) conference, Langkawi, Malaysia, 2012황지홍

◾ 황지홍, 안일혁, Development of an Experimental Method for Investigation into the Size Effect in Micro-Machining, 2012년도 대한기계학회 생산 및 설계부문 춘계학술대회, 대전 컨벤션 센터, 2012황지홍

◾ Micro-Scale Characterization of Strain and Temperature Fields in Machining, 2011 대한기계학회 추계학술대회 강연 및 논문 초록집, 2011황지홍

◾ 김명재, 2차원 직교 절삭에서 주변형 영역 온도 분포 측정, 한국정밀공학회 2011년도 추계학술대회 논문집, 경주 교육문화회관, 2011황지홍

◾ Ik-Hyun Kim, Development of an Experimental Method for Investigation into the Size Effect in Machining, Abstract book for ICA3M 2011, 서울테크노파크, 2011황지홍

◾ 김명재, 배윤기, 조영학, 적외선 열화상 측정을 이용한 나노와이어 히터의 온도분포 측정, 한국정밀공학회 2011년도 춘계학술대회 논문집, 제주 라마다호텔, 2011황지홍

◾ 황원일, 양의정, 박태준, Emotional Analysis of Human Motion for the Silver Robots, 2011 대한인간공학회 춘계학술대회 논문집 CD, 제주 한화리조트, 2011황지홍

◾ 김익현, 안일혁, Validation of FEM Analysis for Size Effect in Orthogonal Cutting, 한국정밀공학회 2010년도 추계학술대회논문집, 창원, 2010황지홍

◾ 배윤기, 김명제, 김성동, 조영학, Fabrication and Temperature Measurement of Bimorph Thermal Microactuator using SU-8 Photoresist, 한국정밀공학회 2010년도 추계학술대회논문집, 창원, 2010황지홍

◾ 김명제, 오영탁, Improvement of Tool Life and Product Quality by Variable Feed Drillin, 한국정밀공학회 2010년도 추계학술대회논문집, 창원, 2010황지홍

◾ Wonil Hwang and Taezoon Hwang, Emotions Invoked by Overall Shape of Robot, Proceedings of the 3rd International Conference on Applied Human Factors and Ergonomics, Miami, Florida, USA, 2010황지홍

◾ 김익현, 안일혁, Physically Compatible Tool Edge Radius, 한국정밀공학회 춘계학한국정밀공학회 2010년도 춘계학술대회 논문집, 제주, 2010황지홍

◾ 안일혁, 최우천, Error Analysis of Cutting Force Calibration Data using Monte-Carlo Simulation, 한국정밀공학회 2010년도 춘계학술대회논문집, 제주, 2010황지홍

◾ 공구와 칩의 경계면에서 절삭유의 역할에 대한 직접 관찰, 공구와 칩의 경계면에서 절삭유의 역할에 대한 직접 관찰, 제주, 2010황지홍

◾ WONIL HWANG, VIBRATION PERCEPTION AND EXCITATORY DIRECTIONS FOR HAPTIC DEVICES, PROCEEDINGS OF THE INTERNATIONAL SYMPOSIUM IN HONOR OF PROFESSOR G. SALVENDY ON HUMAN-CENTERED COMPU, 2008황지홍

◾ Haptic Heuristics: An Exploratory Study, Proceedings of the International Conference on Applied Human Factors and Ergonomics, 2008황지홍

◾ Physical Surface Roughness Parameters and Perceived Roughness, Proceedings of the International Conference on Applied Human Factors and Ergonomics, 2008황지홍

◾ WONIL HWANG AND TAEZOON PARK, PHYSICAL SURFACE ROUGHNESS PARAMETERS AND PERCEIVED ROUGHNESS, 2008황지홍

◾ WONIL HWANG AND TAEZOON PARK, HAPTIC HEURISTICS: AN EXPLORATORY STUDY, The 2nd Proceedings of AHFE International, 2008황지홍

◾ Micro-Scale Characterization of Fluid Action in Machining, Proceedings of the CIRP International Workshop on Modeling of Machining Operations, 2007황지홍

◾ C. HUANG, S. LEE, J. P. SULLIVAN, AND S. CHANDRASEKAR, MICRO-SCALE CHARACTERIZATION OF FLUID ACTION IN MACHINING, 2007황지홍

◾ K. SUBRAMANIAN, SURFACE FINISHING PROCESSES AND TECHNOLOGIES: STATE-OF-THE ART AND EMERGING NEEDS, IN THE GLOBAL ECONOMY, 2006황지홍

Books

◾ 공작기계 I,II, 저서, 두산동아(주), 2011황지홍

Patents

◾ 연성 피가공물의 동결식 가공장치, 특허 등록, 대한민국, 2016황지홍

Projects

◾ 표면 거칠기와 촉각 감성과의 상관 관계, 산학협력단, 2019.09.~2020.08.황지홍

◾ Glass Laminates의 가공기술 자문, 코닝정밀소재주식회사, 2019.05.~2019.09.황지홍

◾ 창조혁신형 디자인고급인력양성사업, 한국산업기술진흥원, 2019.03.~2019.12.황지홍

◾ 미세 절삭 가공 중 스트로보스코피를 이용한 실시간 공구 상태 감시 시스템 개발, 한국연구재단, 2018.06.~2021.05.황지홍

◾ 극변형 조건에 있는 재료의 유동 응력을 얻기 위한 시험 방법 검증, (주)오비피이엔지, 2017.09.~2019.02.황지홍

◾ 스티어링 핸들 부품의 촉감평가 기준 정립을 위한 촉감-표면특성 상관성 분석, 현대엔지비(주), 2017.07.~2018.02.황지홍

◾ 3D 프린팅을 활용한 바이오센서 시작품 제작, 바이오센서연구소(주), 2016.03.~2017.08.황지홍

◾ 극변형 조건에 있는 재료의 유동 응력을 구하기 위한 독창적 시험 방법 개발(2차원 직교 절삭 활용), 한국연구재단, 2015.11.~2018.10.황지홍

◾ Tissue X 제조를 위한 공정 최적화에 대한 기술자문, 바이오센서연구소(주), 2015.11.~2016.04.황지홍

◾ 내장 플라스틱 부품의 촉감 평가 기준 정립을 위한 촉감-표면 물성 상관성 연구, 현대엔지비(주), 2015.09.~2016.11.황지홍

◾ SeoulTech 2016-2020 발전계획, 산학협력단, 2015.09.~2016.02.황지홍

◾ 디자인-기술 융합전문대학원 육성, 한국산업기술진흥원, 2015.03.~2019.02.황지홍

◾ 절삭 공정 시뮬레이션을 위한 기초 물성값 추출, 삼성테크윈(주), 2015.02.~2015.03.황지홍

◾ 절삭 실험을 위한 공구 날 끝 반경의 효율적 제어 방법 개발, 산학협력단, 2014.11.~2015.08.황지홍

◾ 순수 2차원 절삭에서 속도화상입자계측(PIV)을 이용한 절삭 조건에 따른 주변형 영역 내 변형률 분포 고찰, 산학협력단, 2014.11.~2015.08.황지홍

◾ 액화질소를 이용한 오픈 셀 실리콘 폼의 냉동 절삭조건 최적화, 산학협력단, 2013.03.~2014.02.황지홍

◾ 물리적 표면 거칠기와 인지적 표면 거칠기, 산학협력단, 2013.03.~2014.08.황지홍

◾ 망간강 파이프의 드릴링 공정의 내경 가공 최적화 및 표면 조도의 향상을 위한 소재 물성 분석 및 최정가공조건 산정, (주)성일엔케어, 2012.12.~2012.12.황지홍

◾ 순수 2차원 절삭에서 적외선 열화상을 이용한 주변형 영역의 온도 분포 측정, 산학협력단, 2012.05.~2013.02.황지홍

◾ 실버로봇에 적용하기 위한 인간 동작의 분석, 산학협력단, 2012.05.~2013.02.황지홍

◾ 2단계 공학교육혁신센터지원사업, 한국산업기술진흥원, 2012.03.~2014.02.황지홍

◾ 21세기 사회가 요구하는 융합형 tech+ 인재 양성 사업, 한국산업기술진흥원, 2012.03.~2013.02.황지홍

◾ 마이크로 절삭에서 본질적 치수 효과(intrinsic size effect) 고찰을 위한 실험방법 개발 및 치수 효과 모델의 개선, 한국연구재단, 2011.09.~2014.08.황지홍

◾ 글로벌 경쟁력을 갖춘 산학협력 특성화 혁신센터 사업, 한국산업기술진흥원, 2011.05.~2012.02.황지홍

◾ 다학제간 캡스톤디자인.융합교육프로그램 거점센터 사업, 한국산업기술진흥원, 2011.05.~2012.02.황지홍

◾ i매뉴팩처링 전문인력양성(5차년도), 한국생산기술연구원, 2009.03.~2010.02.황지홍

◾ I매뉴팩처링 전문인력양성(4차년도), 한국생산기술연구원, 2008.03.~2009.02.황지홍

◾ PDP 형광체 DISPENSER NOZZLE의 미세가공 공정개발, (주)나래나노텍, 2007.06.~2007.08.황지홍

◾ I매뉴팩처링 전문인력양성 사업, 한국생산기술연구원, 2007.03.~2008.02.황지홍

Awarded

◾ Emotional Factors of Tactile Perception on the Surfaces of Steering Wheel Materials, Best Presentaion Award, 16th International Conference on Innovative Computing, Information and Control (ICICIC 2022), 2022황지홍

◾ Microchannel fabrication on glass materials for microfluidic devices, 2021 IJPEM Highly Commended Paper, International Journal of Precision Engineering and Manufacturing, 2021황지홍

◾ Investigation into the Strain Distribution in the Primary Deformation Zone in 2-D Orthogonal Machining using Particle Image Velocimetry’, 2019 KSMTE Best Paper Award, Korean Society of Manufacturing Engineers, 2019황지홍

◾ Design for Additive Manufacturing in Customized Products, 2017 IJPEM Highly Commended Paper Award, International Journal of Precision Engineering and Manufacturing, 2017황지홍

◾ Engineering Education, 2016 Young Engineering Educator Award, Korean Society for Engineering Education, 2016황지홍

◾ Application of 3D Printing Technology for Designing Light-weight Unmanned Aerial Vehicle Wing Struct, IJPEM-GT Most Downloaded Article Award, 2014, International Journal of Precision Engineering and Manufacturing-Green Technology, 2015황지홍

◾ 2008학년도 교육분야 우수교수 선발 포상, 서울산업대학교, 2009황지홍

Miscellaneous

- Editor, Journal of the Korean Society for Precision Engineering, Jan. 2018 ~ Present
- Associate Editor, Journal of the Korean Society for Precision Engineering, Jan. 2012 ~ 2017
- Associate Editor, Journal of Mechanical Science and Technology, June, 2012 ~ 2015