Graduate School

Introduction Faculty Curriculum

Convergence Program of Biomedical Engineering and Biomaterials

홈 영문-일반대학원 Department Convergence Program of Biomedical Engineering and Biomaterials Faculty

Name	Woo-Tae Park
MAJOR	Micro/Nano Engineering
TEL	02-970-6354
E-mail	wtpark@seoultech.ac.kr

Biography

◾ 2000 BS, Mechanical Design, Sungkyunkwan University

◾ 2002 MS, Mechanical Engineering, Stanford University

◾ 2006 PhD, Mechanical Engineering, Stanford University

Careers

◾ 2006 ~ 2006: Intel Corp. Assembly/Test Technology Development, Senior Packaging Engineer (Chandler, AZ)

◾ 2007 ~ 2010: Freescale Semiconductor, Sensor and Actuator Solutions Division, MEMS development Engineer (Tempe, AZ)

◾ 2010 ~ 2012: Institute of Microelectronics, Agency for Science and Technology and Research, Singapore, Acting Principle Investigator/ Project Leader

Research Areas

◾ Semiconductor manufacturing based technology for MEMS design, fabrication, and testing

◾ Sensors and structures for medical applications

◾ Microneedles for sensing, drug delivery, and fluid extraction

Teaching

Introduction to Electrical and Electronic Engineering
Manufacturing processes
Introduction to Micro and Nano Engineering
Capstone Design

Sensors and Actuators (Graduate)
Introduction to Biomedical Sensors (Graduate)

Journal Papers

◾ Analysis of Thrombosis Formation and Growth Using Microfuidic Chips and Multiphase Computational Fluid Dynamics, BioChip Journal, 2023박우태

◾ Microfluidic thrombosis analysis system: possibilities and limitations, Micro and Nano Systems Letters, 2023박우태

◾ Characterizing the Performance of a Resonance-Based MEMS Particle Sensor with Glass Beads, International Journal of Precision Engineering and Manufacturing-Green Technology, 2023박우태

◾ Tip fabrication methods of hollow metal microneedles, JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, vol.37 No.1 pp.261~269, 2023박우태

◾ Quantitative image analysis of thrombus formation in microfluidic in-vitro models, Micro and Nano Systems Letters, vol.10 No.1, 2022박우태

◾ Influence of multiple stenoses on thrombosis formation: an in vitro study, Micro and Nano Systems letters, vol.10 No.1, 2022박우태

◾ Fabrication method of flexible strain sensors with CNTs and solvents, Sensors and Actuators A: Physical, vol.345, 2022
[원문보기] 박우태

◾ A polymer membrane electrolysis micropump powered by a compact wireless power transmission system, Journal of Mechanical Science and Technology, 2021
[원문보기] 박우태

◾ Rapid biodegradable microneedles with allergen reservoir for skin allergy test, Micro and Nano Systems Letters, vol.8 No.1, 2020
[원문보기] 박우태

◾ MEMS particle sensor based on resonant frequency shifting, Micro and Nano Systems Letters, vol.8 No.1, 2020
[원문보기] 박우태

◾ Biomimetic Flow Sensor for Detecting Flow Rate and Direction as an Application for Maneuvering Autonomous Underwater Vehicle, International Journal of Precision Engineering and Manufacturing-Green Technology, 2020
[원문보기] 박우태

◾ Fabrication method of multi-depth circular microchannels for investigating arterial thrombosis-on-a-chip, Sensors and Actuators B: Chemical, vol.321, 2020
[원문보기] 박우태

◾ A compact wireless power transfer system at 915 MHz with supercapacitor for optogenetics applications, SENSORS AND ACTUATORS A-PHYSICAL, vol.285 pp.386~394, 2019
[원문보기] 박우태

◾ UV-LEDs for the Disinfection and Bio-Sensing Applications, INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, vol.19 No.12 pp.1901~1915, 2018
[원문보기] 박우태

◾ MEMS PZT Oscillating Platform for Fine Dust Particle Removal at Resonance, INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, vol.19 No.12 pp.1851~1859, 2018
[원문보기] 박우태

◾ Analysis of Laser Sintering of Zirconia to Magnesium Alloy by Laser-Induced Plasma Spectroscopy, NANOSCIENCE AND NANOTECHNOLOGY LETTERS, vol.10 No.5-6 pp.790~795, 2018
[원문보기] 박우태

◾ Application of Laser-Induced Plasma Spectroscopy to Diffusion of Cu/Sn-Pb Metal Composites, NANOSCIENCE AND NANOTECHNOLOGY LETTERS, vol.10 No.5-6 pp.682~687, 2018
[원문보기] 박우태

◾ Carbon strain sensor using Nd: YAG laser Direct Writing, J Microelectron. Packag. Soc, vol.25 No.1 pp.35~40, 2018
[원문보기] 박우태

◾ RF power harvesting: a review on designing methodologies and applications, Micro and Nano Systems Letters, vol.5 No.14 pp.1~16, 2017
[원문보기] 박우태

◾ Rapid, low-cost fabrication of circular microchannels by air expansion into partially cured polymer, SENSORS AND ACTUATORS B-CHEMICAL, vol.235 pp.302~308, 2016
[원문보기] 박우태

◾ Micro-ultrasonic welding using thermoplastic-elastomeric composite film, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, vol.236 pp.183~188, 2016
[원문보기] 박우태

◾ Polymeric Biomaterials for Medical Implants and Devices, ACS BIOMATERIALS SCIENCE ENGINEERING, vol.2 No.4 pp.454~472, 2016
[원문보기] 박우태

◾ Microfabricated porous silicon backbone for stable neural interfaces, MATERIALS LETTERS, vol.165 pp.119~122, 2016
[원문보기] 박우태

◾ A Microfluidic Chip-Based Creatinine Filtration Device, 대한기계학회논문집 B, vol.39 No.12 pp.921~925, 2015
[원문보기] 박우태

◾ Thermal packaging for firefighters’ personal protective elctronic equipments, 센서학회지, vol.24 No.5 pp.319~325, 2015
[원문보기] 박우태

◾ Modeling in vitro neural electrode interface in neural cell culture medium, MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOS, vol.21 No.8 pp.1739~1747, 2015
[원문보기] 박우태

◾ Surface Characteristics, Biodegradability and Biocompatibility of Porous Silicon for Microfabricated Neural Electrode, JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, vol.15 No.4 pp.2821~2828, 2015
[원문보기] 박우태

◾ Real-time precision pedestrian navigation solution using Inertial Navigation System and Global Positioning System, ADVANCES IN MECHANICAL ENGINEERING, vol.7 No.3 pp.1~9, 2015
[원문보기] 박우태

◾ Silicon nanowire-based ring-shaped tri-axial force sensor for smart integration on guidewire, JOURNAL OF MICROMECHANICS AND MICROENGINEERING, vol.24 No.6 pp.65002~65013, 2014
[원문보기] 박우태

◾ Biotin-Streptavidin Binding Interactions of Dielectric Filled Silicon Bulk Acoustic Resonators for Smart Label-Free Biochemical Sensor Applications, SENSORS, vol.14 No.3 pp.4585~4598, 2014
[원문보기] 박우태

◾ Drug release from porous silicon for stable neural interface, APPLIED SURFACE SCIENCE, vol.292 No.0 pp.843~851, 2014
[원문보기] 박우태

◾ Cantilever Structural Analysis for Optimal Piezoelectric Power Harvesting, 마이크로전자 및 패키징학회지, vol.20 No.4 pp.31~34, 2013
[원문보기] 박우태

◾ A Four-point Bending Probe Station for Semiconductor Sensor Piezoresistance Measurement, 마이크로전자 및 패키징학회지, vol.20 No.4 pp.35~39, 2013
[원문보기] 박우태

◾ A low-profile three-dimensional neural probe array using a silicon lead transfer structure, JOURNAL OF MICROMECHANICS AND MICROENGINEERING, vol.23 No.0 pp.95013~95025, 2013
[원문보기] 박우태

◾ A flexible polyimide cable for implantable neural probe arrays, MICROSYSTEM TECHNOLOGIES, vol.19 No.8 pp.1111~1118, 2013
[원문보기] 박우태

◾ Cytocompatibility Assessment of Si, Plasma Enhanced Chemical Vapor Deposition-Formed SiO2 and Si3N4 Used for Neural Prosthesis: A Comparative Study, NANOSCIENCE AND NANOTECHNOLOGY LETTERS, vol.5 No.8 pp.916~920, 2013
[원문보기] 박우태

◾ MEMS tri-axial force sensor with an integrated mechanical stopper for guidewire applications, MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS, vol.19 pp.1005~1015, 2013
[원문보기] 박우태

◾ A Study of Piezoelectric Harvesters for Low-Level Vibrations in Wireless Sensor Networks, INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, vol.14 No.7 pp.1257~1262, 2013
[원문보기] 박우태

◾ Effect of Solution Aging Time on Stability of Colorimetric Assay for Degradation Rate Evaluation of Porous Si in Artificial Cerebrospinal Fluid, Advanced materials research, vol.651 No.0 pp.306~311, 2013
[원문보기] 박우태

◾ High sensitive dielectric filled Lame mode mass sensor, SENSORS AND ACTUATORS A-PHYSICAL, vol.188 SPECIAL No.SI pp.82~88, 2012
[원문보기] 박우태

◾ Characterization of piezoresistive-Si-nanowire-based pressure sensors by dynamic cycling test with extralarge compressive strain, IEEE Transactions on Electron Devices, vol.59 No.11 pp.3097~3103, 2012
[원문보기] 박우태

◾ Piezoresistive Sensing Performance of Junctionless Nanowire FET, IEEE ELECTRON DEVICE LETTERS, vol.33 No.12 pp.1759~1761, 2012
[원문보기] 박우태

◾ Characterization of Piezoresistive-Si-Nanowire-Based Pressure Sensors by Dynamic Cycling Test With Extralarge Compressive Strain, IEEE TRANSACTIONS ON ELECTRON DEVICES, vol.59 No.11 pp.3097~3103, 2012박우태

◾ An Inductively Powered Implantable Blood Flow Sensor Microsystem for Vascular Grafts, IEEE TRANSACTIONS ON BIOMEDICAL ENGINEERING, vol.59 No.9 pp.2466~2475, 2012
[원문보기] 박우태

◾ Characterization of a silicon nanowire-based cantilever air-flow sensor, JOURNAL OF MICROMECHANICS AND MICROENGINEERING, vol.22 No.9 pp.1~14, 2012
[원문보기] 박우태

◾ Simulation of train induced forced wind draft for generating electrical power from Vertical Axis Wind Turbine (VAWT), INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, vol.13 No.7 pp.1177~1181, 2012
[원문보기] 박우태

◾ A CMOS Rectifier With a Cross-Coupled Latched Comparator for Wireless Power Transfer in Biomedical Applications, IEEE TRANSACTIONS ON CIRCUITS AND SYSTEMS II-EXPRESS BRIEFS, vol.59 No.7 pp.409~413, 2012
[원문보기] 박우태

◾ Optimization of NEMS pressure sensors with a multilayered diaphragm using silicon nanowires as piezoresistive sensing elements, JOURNAL OF MICROMECHANICS AND MICROENGINEERING, vol.22 No.5 pp.1~15, 2012
[원문보기] 박우태

◾ Implantable Polyimide Cable for Multichannel High-Data-Rate Neural Recording Microsystems, IEEE TRANSACTIONS ON BIOMEDICAL ENGINEERING, vol.59 No.2 pp.390~399, 2012박우태

◾ Tunable piezoresistance and noise in gate-all-around nanowire field-effect-transistor, APPLIED PHYSICS LETTERS, vol.100 No.6, 2012박우태

◾ Gate-All-Around Junctionless Nanowire MOSFET With Improved Low-Frequency Noise Behavior, IEEE ELECTRON DEVICE LETTERS, vol.32 No.12 pp.1752~1754, 2011박우태

◾ Characterization of Silicon Nanowire Embedded in a MEMS Diaphragm Structure Within Large Compressive Strain Range, IEEE ELECTRON DEVICE LETTERS, vol.32 No.12 pp.1764~1766, 2011박우태

◾ Microcantilever sensors with embedded piezoresistive transistor read-out: Design and characterization, SENSORS AND ACTUATORS A-PHYSICAL, vol.171 No.2 pp.178~185, 2011박우태

◾ Gate-bias-controlled sensitivity and SNR enhancement in a nanowire FET pressure sensor, JOURNAL OF MICROMECHANICS AND MICROENGINEERING, vol.21 No.10, 2011박우태

◾ Developing high sensitivity biomass sensor using Lame mode square resonator, Advanced Materials Research, vol.254 pp.46~49, 2011박우태

◾ Design, fabrication, and characterization of ultra miniature piezoresistive pressure sensors for medical implants, advanced materials research, vol.254 pp.94~98, 2011박우태

◾ Design and Characterization of Microelectromechanical System Flow Sensors Using Silicon Nanowires, NANOSCIENCE AND NANOTECHNOLOGY LETTERS, vol.3 No.2 pp.230~234, 2011박우태

◾ Microstructure and mechanical properties of aluminum-germanium eutectic bonding with polysilicon metallization for microelectromechanical systems (MEMS) packaging, SCRIPTA MATERIALIA, vol.64 No.8 pp.733~736, 2011박우태

◾ Surface charge extraction methods in offset shift-related failures of MEMS pressure sensors, JOURNAL OF MICROMECHANICS AND MICROENGINEERING, vol.20 No.11, 2010박우태

◾ Development of wafer scale encapsulation process for large displacement piezoresistive MEMS devices, SENSORS AND ACTUATORS A-PHYSICAL, vol.156 No.2 pp.275~283, 2009박우태

◾ Review: Semiconductor Piezoresistance for Microsystems, PROCEEDINGS OF THE IEEE, vol.97 No.3 pp.513~552, 2009박우태

Conference Papers

◾ 이강혁, 유채은, 박우태, Capacitive tactile array sensor based on CNT elastomer composite, 2023 마이크로나노시스템학회 추계학술대회, 여수 디오션리조트, 2023박우태

◾ 문기정, 동조위, 박우태, Ultra miniature Pressure Sensor Packaging for FFR guidewire, 2023 마이크로나노시스템학회 추계학술대회, 여수 디오션리조트, 2023박우태

◾ 함동휘, 최지섭, 최진호, 박우태, Thrombus Analysis using a Multiphase Fluid Model and Microfluidic Chips, 2023 마이크로나노시스템학회 추계 학술대회, 여수 디오션리조트, 2023박우태

◾ 나종현, 강문석, 김혁, 박우태, Flexible Contact Force Sensor for Ablation Catheter, 2023 마이크로나노시스템학회 추계학술대회, 여수 디오션리조트, 2023박우태

◾ Chao-Wei Dong, Chan-Jin Lee, Do-Hyun Lee, Seong-Hyeon Moon, Woo-Tae Park, Fabrication of Dry Microneedle Array for Biosignal Measurement, 대한기계학회 2023년 학술대회, 인천광역시 송도컨벤시아, 2023박우태

◾ 최지섭, 함동휘, 최진호, 박우태, Analysis of thrombus formation mechanism according to wall shear rate in microfluidic chip, 2023 대한기계학회 추계학술대회, 인천 송도 컨벤시아, 2023박우태

◾ 최지섭, 함동휘, 최진호, 박우태, MICROFLUIDIC THORMBUS ANALYSIS SYSTEM, Transducers 2023 (The 22nd International Conference on Solid-State Sensors, Actuators and Microsystems), Kyoto International Conference Center, 2023박우태

◾ 나종현, 이강혁, 동조위, 박우태, Microneedle Based Blood Extractor for POCT, The 25th Korean MEMS Conference, 제주 부영호텔, 2023박우태

◾ 함동휘, 최지섭, 김정현, 정평호, 최진호, 박우태, Analysis on thrombus growth through blood experiments and simulation, 2022 대한기계학회 추계대회, 제주 ICC, 2022박우태

◾ Chao-Wei Dong, Jong-Hyun Na, Kang-Hyuk Lee, Dong-Hyun Joo, Woo-Tae Park, Development of Microneedle-based Blood Sample Extractor, 2022 대한기계학회 추계대회, 제주 ICC, 2022박우태

◾ Prof. Woo-Tae Park , Mr. Dong-hyun Joo , Mr. Chaowei Dong , Mr. Kijeong Moon , Mr. Seyeon Yoon , Dr. Jin-Ho Choi, Ultra-miniature Pressure Sensor Packaging for Guidewires, Micro and Nano Engineering 2022, 루벤 대학교, 2022박우태

◾ 주동현, 강문석, 박우태, Development of a flexible strain sensor based on CNT/Ecoflex composite using 50 um twilled mesh, 대한기계학회 마이크로나노공학부문 춘계학술대회, 부경대학교, 2022박우태

◾ 함동휘, 최지섭, 헬렘, 김정현, 최진호, 박우태, A study on the effect of multiple stenosis sections on thrombosis induction through CFD analysis, 2022 한국 MEMS 논문집, 제주 부영호텔, 2022박우태

◾ 주동현, 강문석, 박우태, Flexible carbon nanotube strain sensor using acrylic mold transfer method, 2022 한국 MEMS 논문집, 제주 부영호텔, 2022박우태

◾ 최지섭, 김정현, 함동휘, 헬렘, 최진호, 박우태, Diagnosis of in vitro thrombosis formation pattern according to the percentage of stenosis based on image analysis, 2022 한국 MEMS 논문집, 제주 부영호텔, 2022박우태

◾ 동조위, 나종현, 이강혁, 주동현, 박우태, Microneedle based microchannel system for point of care troponin diagnostics, 2022 한국 MEMS 논문집, 제주 부영호텔, 2022박우태

◾ 헬렘, 최지섭, 함동휘, 김정현, 최진호, 박우태, An in vitro study of the influence of the number of stenoses on thrombogenesis: experiment methodology, 2022 한국 MEMS 논문집, 제주 부영호텔, 2022박우태

◾ 최지섭, 박우태, MEMS Dust Sensors Quantitatively Characterized by Glass Beads, MNS (Micro and Nano Systems) Fall meeting, 안면도 리솜리조트, 2021박우태

◾ Chao-Wei Dong, Jong-Yeong Jeon, Hye-Min Kang, Woo-Tae Park, Fabrication of a Hollow Microneedle Array by Metal Deposition, MNS 학술대회 초록집, 안면도 리솜리조트, 2021박우태

◾ Helem Betsua Flores Marcial, Jiseob Choi, Junghyun Kim, Donghui Ham and Woo-Tae Park, Vessel geometry and blood flow rate effect on wall shear rates mimicked in a microfluidic chip, 대한기계학회 2021년학술대회 논문집, 광주 김대중기념관, 2021박우태

◾ 최지섭, 박우태, The quantitative analysis of particle resonator using micro-beads, (사)대한기계학회 마이크로나노공학부문 춘계대회 논문집, BEXCO, 2021박우태

◾ 주동현, 강문석, 박성준, 유세아, 박우태, Analysis of MWCNT Dispersion in Solvents and Flexible Strain Sensor, 대한기계학회 마이크로나노공학부문 춘계대회 논문집, BEXCO, 2021박우태

◾ Chao-Wei Dong, Le-Giang Tran, Woo-Tae Park, Fabrication of Electroplating Nickel Hollow Microneedle Arrays, 2021 KMEMS 학술대회 논문집, 부영 롯데리조트, 2021박우태

◾ 최지섭, 박우태, A particle sensor based on shifting resonant frequency, Proceedings of 22nd KMEMS, 휘닉스 평창리조트, 2020박우태

◾ Chao-Wei Dong, Le-Giang Tran, Woo-Tae Park, An Electrolysis micro pump created for ocular treatment, Proceedings of 22nd KMEMS, 휘닉스 평창리조트, 2020박우태

◾ 유용진, 박우태, Development of guidewire sensor packaging for diagnosis of acute myocardial infarction, 대한기계학회 마이크로/나노공학부문 춘계학술대회 초록집, 온라인, 2020박우태

◾ Hua-Quang-Huy Nguyen, Woo-Tae Park, DESIGN AND SIMULATION OF A NOVEL PIEZORESISTIVE PRESSURE SENSOR FOR GUIDEWIRES, Proceedings of SSDM 2019, Nagoya University, 2019박우태

◾ Le-Giang Tran, Dong-Hyun Joo, and Woo-Tae Park, A BIOINSPIRED PIEZOELECTRIC CILIA ARRAY FOR SENSING OF HYDRODYNAMIC FLOW, 2019 20th International Conference on Solid-State Sensors, Actuators and Microsystems & Eurosensors XXXIII (TRANSDUCERS & EUROSENSORS XXXIII), Berlin Germany, 2019박우태

◾ 주동현, 유용진, 박우태, Strain gauge sensor layout and design for lathe calibration, 한국생산제조학회 2019년도 춘계학술대회 논문집, 평창 알펜시아, 2019박우태

◾ Le-Giang Tran, Thanh-Qua Nguyen, 박우태, A Self -interlocking Microneedle Inspired from the Honeybee Stinger for Skin Adhesive Application, KMEMS 2019 논문집, 제주 칼호텔, 2019박우태

◾ Hua-Quang-Huy Nguyen, Dong-Hyun Joo, Woo-Tae Park, DESIGN AND SIMULATION OF A NOVEL PIEZORESISTIVE PRESSURE SENSOR USED FOR GUIDEWIRES, KMEMS 2019 논문집, 제주 칼호텔, 2019박우태

◾ 주동현, 박우태, Measurements of curved surface motion using strain gauge, KMEMS 2019 논문집, 제주 칼호텔, 2019박우태

◾ Le-Giang Tran , Thanh-Qua Nguyen and Woo-Tae Park, BIO-INSPIRED BARBED MICRONEEDLE FOR SKIN ADHESION WITH INTERLOCKING MECHANICS, Proceedings of IEEE MEMS 2019, Coex, Seoul Korea, 2019박우태

◾ 김민건, 박우태, Resonance Characteristic Analysis of AlN Oscillator for Fine Dust Removal, 2018 KSME Fall Conference proceedings, 강원랜드 컨벤션센터, 2018박우태

◾ Le Giang Tran, Eung Cheon Kim, Woo-Tae Park, Bio-inspired Flow sensor for simultaneous detection of flowrate and direction in underwater, 2018 KSME Fall Conference proceedings, 강원랜드 컨벤션센터, 2018박우태

◾ 응웬탄콰, 김정윤, 최지섭, 이슬람 무킴, 박우태, 이상엽, Magnetic assistance method for polisthing micromilling PMMA mold, 2018 KSME Fall Conference proceedings, 강원랜드 컨벤션센터, 2018박우태

◾ DongHyun Joo, Min-Geon Kim, Woo-Tae Park, Flexible Piezoresistive Strain Sensor Using Nd:YAG Laser Carbonization, Proceedings of International Symposium on Precision Engineering and Sustainable Manufacturing (PRESM2018), Sapporo, Japan, 2018박우태

◾ Min-Geon Kim, Woo-Tae Park, DongHyun Joo, Ji-Seob Choi, MEMS PZT Oscillator for Fine Dust Particle Removal, Proceedings of International Symposium on Precision Engineering and Sustainable Manufacturing (PRESM2018), Sapporo, Japan, 2018박우태

◾ Thanh-Qua Nguyen, Le-Giang Tran, Woo-Tae Park, Engineering various aspect ratio silk fibrous microneedles for transdermal drug delivery, Proceedings of 5th International Workshop on Nanomechanical Sensing, Songdo, Korea, 2018박우태

◾ Le-Giang Tran, Min-Geon Kim, Woo-Tae Park, Designing the silk foam microneedle to enhance intradermal drug delivery by capillary action, Proceedings of Microneedles 2018, Vancouver, Canada, 2018박우태

◾ 마정민, 응웬탄콰, 이창제, 박우태, 이상엽, Optimize micro-milling condition and post process for micro mold fabrication, 2018 KSME Spring Conference proceedings, 부경대학교, 2018박우태

◾ 응웬탄콰, 마정민, 이대웅, 이슬람무킴, 박우태, 이상엽, AC electromagnet field for manipulation magnetic beads, 2018 KSME Spring Conference proceedings, 부경대학교, 2018박우태

◾ 주동현, 박재성, 이혜경, 천권수, 양인철, 박우태, Develolpment of Eyelid Strain Sensing Setup for Eye Movement Measurement, 2018 KSME Spring Conference proceedings, 부경대학교, 2018박우태

◾ 김민건, 박우태, 미세먼지 입자 제거를 위한 MEMS PZT 공진기 구조의 최적화, 2018 KSME Spring Conference proceedings, 부경대학교, 2018박우태

◾ Woo-Tae Park, Rapid and Low-cost Fabrication of Microchannels by Air Expansion, Proceedings of IEEE NEMS (Nano/Micro Engineered and Molecular Systems) 2018, Singapore, 2018박우태

◾ Thanh-Qua Nguyen, Sang-Youp Lee, and Woo-Tae Park, NOVEL CIRCULAR MICROCHANNELS FABRICATION METHOD FOR ARTERY THROMBOSIS INVESTIGATION, Proceedings of IEEE MEMS 2018, Belfast, UK, 2018박우태

◾ Woo-Tae Park, Pushparaj Singh, Implantable medical physical sensor deveopment, 2017년 한국센서학회 종합학술대회, KAIST, 2017박우태

◾ Ji-Won Chon, Dong Hwan Kim, Jae Chun Ahn, Min Geon Kim, Le Giang Tran, and Woo-Tae Park, Artificial hair cell flow sensor with ball joint, 19th international conference on solid state sensors actuators and microsystems, Kaohsiung convention center, 2017박우태

◾ 장관준, 짠레지앙, 이경원, 박우태, Low cost flow sensor assembled with artificial hair cell manufactured by 3D printer, 2017년도 마이크로/나노공학부문 춘계학술대회 논문집, 부경대학교 미래관 컨벤션홀, 2017박우태

◾ 김민건, 김동환, 안재천, 박우태, Analysis and Design of MEMS actuator for surface dust removal on particle sensor, 2017년도 마이크로/나노공학부문 춘계학술대회 논문집, 부경대학교 미래관 컨벤션홀, 2017박우태

◾ 주동현, Le Giang Tran, 박우태, 폴리이미드 필름을 이용한 압저항센서용 레이저 가공 카본센서 연구, 2017년도 마이크로/나노공학부문 춘계학술대회 논문집, 부경대학교 미래관 컨벤션홀, 2017박우태

◾ Nguyen Than Qua, 마정민, 박우태, 이상엽, Microfluidic hanging drop device for controlling cell spheroids density, 2017년도 마이크로/나노공학부문 춘계학술대회 논문집, 부경대학교 미래관 컨벤션홀, 2017박우태

◾ LeGiang Tran, 차혁규, 박우태, RF power harvesting and storage system with supercapacitor for biomedical applications, Proceedings of the 19th Korean MEMS Conference, 제주 칼호텔 연회장, 2017박우태

◾ 전지원, 김동환, 안재천, 박우태, Artificial hair cell flow sensor for unmanned underwater vehicle, KSME 2016 Annual Meeting, 강원랜드 컨벤션센터, 2016박우태

◾ 주동현, 김민건, 박우태, Low cost flexible flow sensor with screen print fabrication, KSME 2016 Annual Meeting, 강원랜드 컨벤션센, 2016박우태

◾ 레지앙짱, 차혁규, 박우태, Radio Frequency Energy Harvesting with Various Stages of Voltage Multiplier, The 18th Korean MEMS Conference, 제주 칼호텔, 2016박우태

◾ 전지원, 송준엽, 이재학, 박우, ISB 본딩 기술을 이용한 3D 칩 적층의 잔류응력 해석, The 18th Korean MEMS Conference, 제주 칼호텔, 2016박우태

◾ 응웬탄콰, 박우태, Microfluidic device for polymeric nanoparticles synthesis, The 18th Korean MEMS Conference, 제주칼호텔, 2016박우태

◾ 전지원, 송준엽(한국기계연구원), 이재학(한국기계연구원), 박우, Analyze thermal stress of 3D multi-chip stacking using ISB bonding technology, KSME 2015 Annual Meeting, ICC Jeju (제주국제컨벤션센터), 2015박우태

◾ LeGiang Tran, 차혁규(전기정보공학과), 박우, Radio Frequency Energy Harvesting for Biomedical Applications, KSME 2015 Annual Meeting, ICC Jeju(제주국제컨벤션센터), 2015박우태

◾ Minkyu Je, 박우태 외 22, Wireless sensor microsystems for emerging biomedical applications, Radio-Frequency Integration Technology (RFIT), 2015 IEEE International Symposium on, Tohoku University, Sendai Japan, 2015박우태

◾ 김태희, 김동준, 이상엽(한국과학기술연구원), 박우태, The Effects of Pressure and Solution Properties in Manufacturing Microcapsules using a Coaxial-nozzle Apparatus, 2015년도 대한기계학회 마이크로/나노공학 춘계학술대회 논문집, BEXCO 컨벤션홀, 2015박우태

◾ 이삭, 신동규, Thanh Qua Nguyen, 박우, A microfluidic chip-based creatinine filtration device, 2015년도 대한기계학회 마이크크로/나노공학부문 춘계학술대회 논문집, BEXCO 컨벤션홀, 2015박우태

◾ 응웬탄콰, 박우태, Thermal air molding method for fabricating round shape cross-section micro channels, The 17th Korean MEMS Conference, 제주 KAL 호, 2015박우태

◾ 응웬 탄콰, 박우, Rapid, low cost fabrication of circular cross-section microchannels by thermal air molding, 2015 28th International conference on Micro Electro Mechanical Systems (MEMS), Estoril, Portugal, 2015박우태

◾ 신양재, 이우철, 김태희, 박우태, 이상엽, 약물전달시스템의 이용될 마이크로캡슐 제조를 위한 동축노즐 기반의 장비 구축, 2014년도 추계학술대회 논문 초록집, 김대중컨벤션센터, 2014박우태

◾ 권성찬, 전지원, 박우태, MEMS 응력센서 민감도 측정을 위한 4점 굽힘 프로브 스테이션, 2014년도 추계학술대회 논문 초록집, 김대중컨벤션센터, 2014박우태

◾ 권성찬, 박우태, 전지원, 이우철, 신양재, 반도체센서 측정을 위한 4점 굽힘 프로브 스테이션, 한국정밀공학회 2013년도 추계학술대회 논문집, 부산 BEXCO, 2013박우태

◾ B. Han, Y.-J. Yoon, M. Hamidullah, A. T.-H. Lin, and W.-T. Park, SILICON NANOWIRE BASED RING SHAPE FORCE SENSOR FOR SENSORIZED GUIDEWIRES, Proceedings of the 17th international conference on solid-state sensors, actuators and microsystems, Barcelona, Spain, 2013박우태

◾ 임근수, 조성식, 김수현, 박우태, 캔틸레버 구조해석을 통한 최대 에너지 수확, 한국신재생에너지학회 2012년도 추계학술대회 초록집, 제주롯데호텔, 2012박우태

◾ B Han, YJ Yoon, M Hamidullah, ATH Lin, WT Park, Development of a ring shaped triaxial tactile sensor for minimally invasive surgery applications, Proceedings of Bio4Apps 2012, Singapore, 2012박우태

◾ SS Zhang, L Lou, WT Park, LS Lim, WM Tsang, M Je, C Lee, Silicon Nanowires (SiNWs) Based NEMS Piezoresistive Mechanical Sensors, Proceedings of the Bio4Apps conference 2012, Singapore, 2012박우태

◾ JH Cheong, WT Park et al, A Wirelessly Powered and Interrogated Blood Flow Monitoring Microsystem Fully Integrated with a Prosthetic Vascular Graft for Early Failure Detection, Proceedings of 8th IEEE Asian Solid-State Circuits Conference 2012, Kobe, Japan, 2012박우태

◾ 박우태, Micro/nano technologies for medical devices, 대한기계학회 2012년도 추계학술대회 강연 및 논문 초록집, CECO, 2012박우태

◾ L Lou, HK Yan, C He, WT Park, DL Kwong, C Lee, Characterization of Si Nanowires-based Piezoresistive pressure sensor by dynamic cycling test, Proceedings of the 19th international symposium of physical and failure analysis of ICs, Singapore, 2012박우태

Books

◾ WT Park, Encyclopedia of Nanotechnology, 저서, 978-90-481-9752-1, Springer, 2012박우태

◾ Bhansali, S, MEMS FOR BIOMEDICAL APPLICATIONS, 저서, 978-0-85709-129-1, WOODHEAD PUBLISHING, 2012박우태

Patents

◾ 수중 탐사용 드론의 유속 감지 장치(압저항 압력센서를 이용한 인공섬모형 유속센서), 특허 등록, 대한민국, 2018박우태

◾ 조류 센서, 특허 등록, 대한민국, 2017박우태

Projects

◾ RF 에너지 수확을 통한 펌프 구동기, 산학협력단, 2019.03.~2020.02.박우태

◾ 급성심근경색의 진단 및 치료의 테라노스틱스를 위한 인체 삽입형 초소형 복합센서 장착 스마트와이어 시스템의 원천기술 개발, 한국산업기술평가관리원, 2018.05.~2022.12.박우태

◾ 고신뢰성 기계부품 설계 전문인력양성, 한국산업기술진흥원, 2018.03.~2021.02.박우태

◾ 마이크로니들 패치를 이용한 알레르기 검사 연구, 한국연구재단, 2017.03.~2019.02.박우태

◾ 방사선 의공학(X-Care/Cure) 산업의 실태조사와 미래발전 방안 연구, 한국연구재단, 2016.12.~2017.05.박우태

◾ 먼지 탈착 기능을 가진 MEMS 기반 초소형 미세먼지 센서 개발, 한국산업기술평가관리원, 2016.09.~2019.08.박우태

◾ 조류 환경에서의 수중 관측/탐사를 위한 2.0m/s 조류 인지 및 극복 능력을 갖춘 저가 관찰급 수중 탐사체 핵심기술개발, 한국산업기술평가관리원, 2015.12.~2019.11.박우태

◾ [LINC4차]3D HTLAB-EMG 센서를 이용하는 의수 개발, 서울특별시, 2015.05.~2015.11.박우태

◾ 실리콘 웨이퍼 기반 마이크로팁 제조 및 양산에 대한 자문지원, (주)케이엔알시스템, 2014.01.~2014.12.박우태

◾ 랩칩(LOC) 기술을 이용한 인공 신장시스템에 관한 연구, 한국연구재단, 2013.09.~2015.08.박우태

◾ 마이크로/나노 구조물의 잠닉손상 정밀 진단을 위한 초고분해능 음향현미경(GHz-AMS) 기술 개발, 한국연구재단, 2013.07.~2017.06.박우태

◾ 무선 광-신경 자극과 전기신호 측정을 위한 유연한 광유전학 탐침 개발, 한국연구재단, 2013.06.~2016.05.박우태

◾ 센서모듈 내열/방수 패키징 개발, 한국과학기술연구원, 2013.06.~2016.06.박우태

◾ 초고속 열사이클 Stack Bonding 시뮬레이션 기술 및 테스트칩 개발, 한국기계연구원, 2012.10.~2015.09.박우태

◾ 그래핀 박막의 기계적 물성 측정, 산학협력단, 2012.09.~2013.07.박우태

◾ 켄틸레버 구조해석을 통한 압전소자의 최대 전력량 산출, 산학협력단, 2012.09.~2013.06.박우태

Awarded

◾ 2016학년도 교육분야 우수교원, 우수교육상, 교수학습개발센터, 2017박우태

◾ 마이크로 플루이딕 칩을 기반으로 한 크레아티닌 여과장치, 대한기계학회논문집 우수논문상, Korean Society of Mechanical Engineers, 2016박우태